CleverMic 1212SHN Manuale utente

CleverMic 1212SHN

PTZ - camera

User Manual

V2.1

(English)

Preface

Thanks for using

CleverMic 1212SHN PTZ-camera.

This

manual

introduces

the

function,

installation

and

operation

the

camera.

Prior

installation and usage, please read the manual thoroughly.

Precautions

This

product

can

only

used

the

specified

conditions

order

avoid

any

damage

the

camera:



Don’t subject the

camera to rain or moisture.



Don’t remove the cover. Otherwise, you may get an electric shock. In case of abnormal

operation, contact the authorized engineer.



Never operating under unspecified temperature , humidity and power supply.



Please use the soft dry cloth to clean the camera. If the camera is very dirty, clean it with

diluted neuter detergent; do not use any type of solvents, which may damages the surface.

Note

This

class

production.

Electromagnetic

radiation

the

specific

frequency

may

affect

the

image quality of TV in home environment

Notice

All

contents

of this manual,

whose copyright belongs to

our

Corporation.

Cannot

be cloned, copied

or translated without the permission of the company.

Product

specifications and information which were

referred to in this document are for reference only, and the content will be updated at any time without

prior notice

Contents

Note.........................................................................................................................................................3

Supplied Accessories ...............................................................................................................................3

Quick Start...............................................................................................................................................4

Features ...................................................................................................................................................6

Product Specification...............................................................................................................................7

Main Unit ................................................................................................................................................9

Size........................................................................................................................................................10

IR Remote Controller Explanation.........................................................................................................11

RS-232 Interface....................................................................................................................................13

VISCA Network Configuration .............................................................................................................14

Serial Communication Control ..............................................................................................................15

Command List .......................................................................................................................................15

Menu Setting .........................................................................................................................................16

NetworkFunction...................................................................................................................................21

Maintenance and Troubleshooting.........................................................................................................29

Note

Electric Safety

Installation and operation must accord with electric safety standard.

Caution to transport

Avoid stress, vibration and soakage in transport, storage and installation.

Polarity of power supply

The power supply of the product is +12V, the max electrical current is 2A .Polarity of the power

supply plug drawing as follows.

Careful of installation

Do not grasp the camera head when carrying the camera. Don’t turn camera head by hand. Doing

so may result in mechanical damage.

Don’t apply in corrosive liquid, gas or solid environment to avoid damaging the cover which is

made up of plastic material.

To make sure no obstacle in rotation range.

Never power on before installation is not completed.

Don’t dismantle the camera

We are not responsible for any unauthorized modification or dismantling.

CAUTION!

The specific frequency of electromagnetic field may affect the image of the camera!

SuppliedAccessories

When you unpack, check that all the supplied accessories are included:

Camera ......................................................... 1PCS

AC power adaptor.......................................... 1PCS

Power cord..................................................... 1PCS

RS232 cable................................................... 1PCS

Remote controller .......................................... 1PCS

User manual ................................................. 1PCS

Quick Start

Step1. Please check connections are correct before starting

Step2. Setting of the system select switch

The option of video format:

VIDEO SYSTEM

0 1080p60 8 720p30

1 1080p50 9 720p25

2 1080i60 A -

3 1080i50 B -

4 720p60 C -

5 720p50 D 576i

6 1080p30 E 480i

7 1080p25 F -

CAUTION:

a. After changing the switch, you need to restart the camera to take effect.

b. 720 p30 and 720 p25 only under the HDMI output.

Step3. Press the Switch ON/OFF button on the rear of the camera, the power lamp light.

Step4. Pan-Tilt will rotate to the maximum position of top right after the camera started, then it return to

the center, the process of initialization is finished. (Note: If the position preset 0 has been stored, the

position preset 0 will be called up after initialization)

Features

72.5 Wide-angle Lens + 32x Digital Zoom

Use 72.5°wide-angle high quality lens, support 12x optical zoom, and 32x digital zoom

(optional).

H.265 Support

The first H.265 encoding support conference video camera in the world, enabling full HD

1080p/60fps video stream by ultra-low bandwith.

1080P Full HD

Apply Panasonic's 1/2.7 inch, 2.07 million effective pixels high quality HD CMOS sensor, can

reach maximum 1920 x 1080 high resolution and achieve quality image.

Ultra-high Frame Rate

The output frame rate up to 60fps in 1080P, up to 120fps output in 720P (supported by S Model

only), 640x480P can be as high as 240fps (supported by S Model only, optional).

Face Detection

Built-in face detection module, enabling PTZ tracking (optional).

AAC Audio Encoding

SupportAAC audio encoding, better sound quality and smaller bandwidth.

Local Storage

Support local storage module, directly recording to local USB flash disk without NVR.

Low-light

High SNR of CMOS sensor combined with 2D and 3D noise reduction algorithm, effectively

reduce the noise, even under low illumination conditions, picture can still keep clean and clear.

Abundant & Perfect Interface

Support HDMI output, 3G-SDI interface, effective transmission distance up to 150 meters (under

1080p30). HDMI, SDI, Network can output at the same time. It also support CVBS interface.

Remote Control

Using RS232/485 interface, all the parameters of the camera can be remote controlled by the

high-speed communications.

Freeze During Preset

Support "Freeze During Preset" function, can masked image when calling the preset.

Product Specification

Camera

Video System

HD: 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25,

720p/60, 720p/50, 720p30,720p25,720p/120 (Supported by S Model

only),640x480p/240 (Supported by S Model only, optional)

SD: NTSC, PAL

Sensor 1/2.7 inch, CMOS, Effective Pixel: 2.07M

Scanning Mode Progressive

Lens 12x, f3.5mm ~ 42.3mm, F1.8 ~ F2.8

Digital Zoom 16x (optional)

Minimal Illumination 0.05 Lux @ (F1.8, AGC ON)

Shutter 1/30s ~ 1/10000s

White Balance Auto, Indoor, Outdoor, One Push, Manual

Backlight Compensation Support

Digital Noise Reduction 2D&3D Digital Noise Reduction

Video S/N ≥55dB

Horizontal Angle of View 72.5° ~ 6.9°

Vertical Angle of View 44.8° ~ 3.9°

Horizontal Rotation Range ±170°

Vertical Rotation Range -30° ~ +90°

Pan Speed Range 1.7° ~ 100°/s

Tilt Speed Range 1.7° ~ 69.9°/s

H & V flip Support

Image Freeze Support

PoE Support(optional)

Face Detection Support (optional)

Local Storage Support

Number of Preset 255

Preset Accuracy 0.1°

IPC Features

Video coding standard H.265/H.264/MJEPG

Video Stream First Stream, Second Stream

First Stream resolution 1920x1080, 1280x720, 1024x576,960x540,640x480, 640x360

Second Stream resolution

50HZ：1280x720, 1024x576, 720x576, 720x408, 640x360, 480x270,

320x240

60HZ：1280x720, 1024x576, 720x480, 720x408, 640x360, 480x270,

320x240

Video Bit Rate 128Kbps ~ 8192Kbps

Bit Rate Type Variable rate, Fixed rate

Frame Rate

50Hz: 1fps ~ 50fps, 60Hz: 1fps ~ 60fps, 720p120: 120fp(supported

by S Model only), 640x480p240: 240fps(Supported by S Model

only, optional)

Audio encode standard AAC

Audio Bit Rate 96Kbps, 128Kbps, 256Kbps

Support protocols TCP/IP, HTTP, RTSP, RTMP, Onvif, DHCP, Multicast, etc.

Input/Output Interface

HD Output

1xHDMI: Version 1.3

1x3D-SDI: BNC type, 800mVp-p, 75Ω, Along to SMPTE 424M

standard

SD Output 1xCVBS: RCA jack, 1Vp-p, 75Ω

Network interface 1xRJ45: 10/100/1000M Adaptive Ethernet ports

Audio interface 1-ch 3.5mm audio interface, Line In

USB 1xUSB2.0: Type A female jack

Communication interface

1xRS-232 IN: 8pin Min DIN, Max Distance: 30m, Protocol:

VISCA/Pelco-D/Pelco-P

1xRS-232 OUT: 8pin Min DIN, Max Distance: 30m, Protocol:

VISCA network use only

1xRS-485: 2pin Phoenix Port, Max Distance: 1200m, Protocol:

VISCA/Pelco-D/Pelco-P

Power jack JEITA type (DC IN 12V)

Generic Specification

Input Voltage DC 12V / PoE (802.3af) (optional)

Current Consumption 1.0A (Max)

Operating Temperature -10°C ~ 40°C (14°F ~ 104°F)

Storage Temperature -40°C ~ 60°C (-40°F ~ 140°F)

Power Consumption 12W (Max)

MTBF >30000h

Size 169mm x 142mm x 164mm

Net Weight 1.35Kg (3.0lb)

Main Unit

1.Audio LINE IN Interface 7. Network Interface

2. CVBS Interface 8. HDMI Interface

3. System select switch 9. SDI Interface

4. RS485 interface 10. USB2.0

5. RS232 IN interface 11. DC 12V jack

6. RS232 OUT interface 12. Power switch

Indice

Altri manuali CleverMic Telecamera di sicurezza

CleverMic

CleverMic 1212UHN Manuale utente

CleverMic

CleverMic 300-U3S Manuale utente

CleverMic

CleverMic 1030U2HS-NDI Manuale utente

CleverMic

CleverMic 300-U3S Manuale utente

CleverMic

CleverMic SDI Series Manuale utente

CleverMic

CleverMic 1220SHN Manuale utente

CleverMic

CleverMic Pro HD PTZ HUSL20 Manuale utente

CleverMic

CleverMic 4035UHS Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente