Clevertronics LED CIRCLITE Istruzioni per l'installazione e il funzionamento

1948345 V2.2 11 August 2020

Rated Emergency Lumen Output in accordance with AS2293.1, not applicable

for –TH (theatre) version (refer to spacing tables for installation positions):

Refer to the Technical Label for classification information.

Caution:

On many building sites, power circuits may be cut off in an uncontrolled and repetitive basis during

construction. As aresult, any Exit & Emergency Units, on thesecircuits, will havetheir batteries discharged

or “cycled”. The battery in this fitting has been selected to give excellent long-life performance in a

controlled AS2293 testing environment. Excessive battery cycling will reduce through-life performance and

may lead to premature battery failure. Battery warranty claims, as a result of such abuse, are specifically

EXCLUDED from Clevertronics warranty terms.

Warranty:

For Product Warranty information and Terms and Conditions of Sales please refer to our website

http://clevertronics.com.au/terms-conditions-sale-australia-nz/

Victoria (Head Office & Manufacturing)

Website: www.clevertronics.com.au

Email: info@clevertronics.com.au

Phone: +61 3 9559 2700

Fax: +61 3 9559 2799

New South Wales

Phone: +61 2 8805 6400

Fax: +61 2 8805 6444

Queensland

Phone: +61 7 3442 9700

Fax: +61 7 3442 9777

South Australia/Northern Territory

Phone: +61 8 8301 8800

Fax: +61 8 8351 8286

Western Australia

Phone: +61 8 9248 3720

Fax: +61 8 9248 3725

New Zealand

Phone: +64 800 548 448

Models:

FCLLED LED Circlite with Cool White LEDs

FCLLED-WW LED Circlite with Warm White LEDs

FCLLED-MS LED Circlite with Cool White LEDs and microwave movement sensor

FCLLED-WW-MS LED Circlite with Warm White LEDs and microwave movement sensor

ECLLED LED Circlite with Cool White LEDs and maintained emergency function

ECLLED-WW LED Circlite with Warm White LEDs and maintained emergency function

ECLLED-MS LED Circlite with Cool White LEDs maintained emergency and microwave movement sensor.

ECLLED-WW-MS LED Circlite with Warm White LEDs maintained emergency and microwave movement sensor.

Spare Parts:

1510160 –Battery, 6 x Sub C NiCad Battery SBS, 7.2V 1800mAh

Important:

It is illegal for anyone, except for a licensed electrician to install or maintain this product. Before installation,

ensure that the electricity supply has been switched off and isolated. Installation must be carried out in

accordance with the relevant Australian and International Standards.

LED CIRCLITE Luminaire

Installation & Maintenance Instruction Leaflet

Designed in Australia to comply with the requirements of

AS2293.3: 2005 and AS/NZS CISPR15: 2017

1948345 V2.2 11 August 2020

Installation:

A. Surface Mount

1. Disassemble the diffuser and LED panel.

2. Pull the power cord through the grommet.

3. Fix the base to the surface.

4. Connect the power cord.

5. Assemble the LED panel and diffuser.

B. Semi recessed Mount (special option)

1. Cut a 320mm hole into the mounting surface.

2. Disassemble the diffuser and LED panel.

3. Place the metal frame above the hole in the

mounting surface.

4. Pull the power cord through the grommet.

5. Insert the base into the mounting hole and

attach to the frame with 2 x 4mm screws.

6. Assemble the LED panel and diffuser.

Power Supply Connection, 240V, 50Hz: Connect power to the fitting as shown.

Testing:

Once connected to the 240V mains supply, the unit must be allowed to charge the battery for at least

24 hours. Conduct the following tests:

•For the first test, the emergency lamp must remain illuminated for at least 2 hours after

disconnection from the mains supply.

•Subsequent tests require the unit to illuminate for at least 90 minutes. The results of all tests are

required to be recorded in a service logbook, which is to be kept on-site at all times. If the unitfails

to remain illuminated for the requisite time, remedial action must be taken to repair the situation

and once completed, the unit must pass a subsequent test. For more specific information, please

refer to the current edition of the AS 2293.2 Standard.

Trouble Shooting:

Below are a list of common problems and their possible causes.

Fault: The Red LED indicator is not illuminated.

Check: A.C. is connected and is turned on.

Battery is connected

Test Switch for damage.

Fault: Lamp does not illuminate in emergency mode.

Check: A.C. is connected.

Battery is connected.

Red LED is on (battery charging).

Fault: Lamp illuminates in emergency mode, but only stays on for a short period.

Check: Battery has been allowed to charge for at least 24 hours.

Battery for damage.

Battery Replacement

1. Disconnect power.

2. Remove the battery plug from the PCA

3. Remove the battery mounts

4. Remove the old battery

5. Fit the new battery and fix in position

6. Reconnect the battery to the PCA.

Metal Frame

Metal Ring

FCLLED-MS & ECLLED-MS (sensor)

FCLLED & ECLLED (no sensor)

Note: Link 1&2 for permanent on or use switch for on/off

Questo manuale è adatto per i seguenti modelli

Altri manuali Clevertronics Attrezzatura di illuminazione

Clevertronics

Clevertronics L10 LBLLED-REC-WM Series Specifiche tecniche

Clevertronics

Clevertronics CLP CWSQLED Series Manuale

Clevertronics

Clevertronics ECFLED-LI Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics CLP Ultrablade Pro CUBPRO Series Manuale

Clevertronics

Clevertronics L10 Cleverfit LCFLED Series Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics LP CBS4LEDS DIF Series Specifiche tecniche

Clevertronics

Clevertronics LP LIFELIGHT PRO CLIFE-PRO-SMS-SPOT Series Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics Argonaut PLUS Guida alla manutenzione e all'assistenza

Clevertronics

Clevertronics CLP LIFELIGHT PRO Specifiche tecniche

Clevertronics

Clevertronics LP CWSQLED Series Manuale utente

Clevertronics

Clevertronics LP LIFELIGHT PRO Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics LP Argonaut Manuale di istruzioni

Clevertronics

Clevertronics FBS2LED-DIF Series Manuale utente

Clevertronics

Clevertronics l10 LBULKy Series Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics ARGOPRO-1200 Series Manuale utente

Clevertronics

Clevertronics Trade Series Manuale

Clevertronics

Clevertronics L10 LIFELIGHT LLIFE Series Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics TS Trade Series Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics LP CSBLED Series Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics CLP CCFPRO Series Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics ELIFE-X-LI Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics L10 LSBLED Series Istruzioni per l'installazione e il funzionamento

Clevertronics

Clevertronics L10 CleverFit Exit LCFLED Series Manuale utente

Clevertronics

Clevertronics L10 Cleverfit Pro LCFPRO-TH Series Istruzioni per l'installazione e il funzionamento

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente