Cloudworks CDS541 Manuale utente

USER

MANUAL :

DOCUMENT

NAME

CDS541

Cumulus Pulse

Document Number:

Client:

Date:

Issue:

Status:

Classification:

S/W File Name

This document contains information relating to the rights of

agreement provisions are applicable to this document. When no longer needed for authorised

purposes, this document must be destroyed or returned to

Cape Digital Solutions

reserves the right to change the desi

without prior notice.

The contents of this manual is the property

without prior permission, in writing, from

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Cumulus Pulse

Logger User Manual

CDS541 Cumulus Pulse Logger User Manual

User

28 February 2018

V2.0

Draft

Confidential

CDS541 Cumulus Pulse Logger User Manual.docx

This document contains information relating to the rights of

Cape Digital Solutions

. The confidentiality

agreement provisions are applicable to this document. When no longer needed for authorised

purposes, this document must be destroyed or returned to

Cape Digital Solutions.

reserves the right to change the desi

gn or specifications of their products

The contents of this manual is the property

of Cape Digital Solutions

and may not be copied or modified

without prior permission, in writing, from

Cape Digital Solutions, Cape Town, South Africa.

PAGE

. The confidentiality

agreement provisions are applicable to this document. When no longer needed for authorised

gn or specifications of their products

and may not be copied or modified

USER

MANUAL :

DOCUMENT

NAME

Issue Date

V01 28 Feb 2018

V02 25 Jul 2019

V03 19 Jan 2021

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

AMENDMENT HISTORY

Amendment Details

Amended By

Compile document

Alex Romanov

Updated modem technology specs

Alex Romanov

New configuration text

Alex Romanov

PAGE

Amended By

Alex Romanov

USER

MANUAL :

DOCUMENT

NAME

Table of Contents

CDS541 Cumulus Pulse Logger

1.1

Introduction ................................

................................

1.2

Features ................................

................................

1.3

Specifications

................................

1.4

Architecture ................................

................................

1.5

Power Modes

................................

1.6

LED Functions

................................

1.7

Pushbutton Functions

................................

1.8

Connections

................................

1.8.1

External Power Supply / Solar System Connection

1.8.2

Using the Digital Output

................................

1.8.3

Using the Digital Input

................................

1.8.4

Using the 4-

20mA loop input and 24V loop power generator

1.8.5

Using the Pulse Input with echo output

1.8.6

Using the ECO interface

................................

Logger Setup

................................

2.1

Setup via Bluetooth Configure

................................

2.2

Setup via Remote Configure

................................

2.3

Setup via Offline Script Configure

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

CDS541 Cumulus Pulse Logger

................................

...........................

................................

...............................

................................

................................................................

.......................

................................

..........................

................................

................................................................

.......................

................................

................................................................

......................

................................

................................................................

...........

................................

................................................................

.........................

External Power Supply / Solar System Connection

................................

.....................

................................

...............................

................................

20mA loop input and 24V loop power generator

................................

Using the Pulse Input with echo output

................................................................

......

................................

.............................

................................

..............................

................................

...........................

................................

..............................

Setup via Offline Script Configure

................................................................

......................

PAGE

................................

.. 4

...........................

...............................

.......................

..........................

.......................

......................

...........

.........................

.....................

...............................

................................

.... 10

......

.............................

..............................

...........................

..............................

......................

USER

MANUAL :

DOCUMENT

NAME

1 CDS541 CUMULUS PULSE

LOGGER

1.1 Introduction

The Cumulus Pulse

logger is a robust, sophisticated 3G GSM logger/controller with a wide range of input/output

capabilities, making it ideal for a

large number of uses including utility and r

Standard in this l

ogger is a GPS receiver allowing for the precise location determina

Communication to your own server

and database can be achieved

on these servers is supplied free of charge.

setup without the need for a complicated se

supplied free of charge to allow clients to manage their own networks and data. There are no monthly charges for

collecting and hosting data as the client can provide this service themselves

1.2 Features



Uses 3G GSM (UMTS/HSPA) technology. Thi

world will soon no longer be supporting older GPRS techn

This has already started happening in many countries around the world.



Onboard GPS. Networks are plotted automatically on Google Earth giving the client a precise location of assets in

the field.

 Bluetooth interface -

setup and manual data collection can be achieved through the Bluetooth interface negating

the need for cable

s that invariable fail during continuous use.

 Battery or m

ains operated with battery failover in dual mode.

 Uses standard off-the-shelf a

lkaline batteries. This logger uses 3x standard D Cell alkaline batteries that

excess of 5 years under no

rmal usage. Many other loggers use

obtain. Other problems involving l

ithium batteries are the restrictions when shipping using airfreight. All

batteries need to be shipped as hazardous cargo tha

are no longer allowing these batteries on their aircraft.



ECO Interface for the connecting to GWF electronic meters.

 Isolated 4-

20mA interface. Used for any sensing device

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

LOGGER

logger is a robust, sophisticated 3G GSM logger/controller with a wide range of input/output

large number of uses including utility and r

emote control/measurement applications.

ogger is a GPS receiver allowing for the precise location determina

tion needed in large networks.

and database can be achieved

via

the internet or a private APN.

on these servers is supplied free of charge.

The Cumulus Pulse

Logger has been designed to allow for easy installation and

setup without the need for a complicated se

rver infrastructure. Setup and m

anagement software (CloudWorks) is

supplied free of charge to allow clients to manage their own networks and data. There are no monthly charges for

collecting and hosting data as the client can provide this service themselves

Uses 3G GSM (UMTS/HSPA) technology. Thi

s has become essential as many c

ellular network providers around the

world will soon no longer be supporting older GPRS techn

ologies, rendering legacy GPRS d

This has already started happening in many countries around the world.

Onboard GPS. Networks are plotted automatically on Google Earth giving the client a precise location of assets in

setup and manual data collection can be achieved through the Bluetooth interface negating

s that invariable fail during continuous use.

ains operated with battery failover in dual mode.

lkaline batteries. This logger uses 3x standard D Cell alkaline batteries that

rmal usage. Many other loggers use

ithium batteries that are expensive and difficult to

ithium batteries are the restrictions when shipping using airfreight. All

batteries need to be shipped as hazardous cargo tha

t is becoming increasingly difficult to achieve as many airlines

are no longer allowing these batteries on their aircraft.

ECO Interface for the connecting to GWF electronic meters.

20mA interface. Used for any sensing device

with a 4-20mA output.

PAGE

logger is a robust, sophisticated 3G GSM logger/controller with a wide range of input/output

emote control/measurement applications.

tion needed in large networks.

the internet or a private APN.

The software running

Logger has been designed to allow for easy installation and

anagement software (CloudWorks) is

also

supplied free of charge to allow clients to manage their own networks and data. There are no monthly charges for

ellular network providers around the

ologies, rendering legacy GPRS d

ataloggers obsolete.

Onboard GPS. Networks are plotted automatically on Google Earth giving the client a precise location of assets in

setup and manual data collection can be achieved through the Bluetooth interface negating

lkaline batteries. This logger uses 3x standard D Cell alkaline batteries that

can last in

ithium batteries that are expensive and difficult to

ithium batteries are the restrictions when shipping using airfreight. All

lithium

t is becoming increasingly difficult to achieve as many airlines

USER

MANUAL :

DOCUMENT

NAME



Onboard 24V 30mA power generator. The

of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need

for a secondary power supply. This



2 x Pulse inputs with echo output

measured amount of product. The echo output will allow this logger to be connected in conjun

device requiring use of the same pulse output.

 1 x Digital input - U

sed for general input application.

 1 x Digital output (max 500mA at

 Large onboard non-

volatile memory

Application dependent.



Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

transmitted at programmable intervals



Remote programming of all setup parameters via GPRS link or SMS.



Ideal for leak detection, alarming and water shut



Onboard Bluetooth can stream diagnostic information about signal strength,

 Pushb

utton and LED's for manual wakeup to server and diagnostic purposes etc.

1.3 Specifications

 GPRS multi-

slot class 12/ EDGE multi

 Onboard GPS

 Bluetooth interface



 Option of mains/solar

power with battery failover and sleep



All management software supplied free

 Standard Alkaline Batteries -

3 x D cells

 ECO Interface for GWF meters

 24V 30mA Generated power o

utput

 2 x Pulse inputs with echo out

 1 x Digital input

 1 x 500mA max 50V Output

 Isolated 4-20mA Input port

 11000 Record datalog memory

(application dependent)

 Full SMS driven command set

 Logging intervals 1 minute to 1 m

onth

 Rugged housing with padlock eye

 Pushbutton and LED Diagnostics



Configuration and diagnostics through Bluetooth interface

 Fully configurable remotely

 Stream data in real-

time when powered by mains or 12V supply



Size 175mm x 180mm x 78mm (including cable glands)

 Housing Protection Class - IP65

 Environment : -

20°C to 80°C humidity

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Onboard 24V 30mA power generator. The

Cumulus Pulse l

ogger can generate a stable 24V output at a maximum

of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need

option will also function under battery operation.

2 x Pulse inputs with echo output

Pulse inputs are used on metering devices that supply a pulse output for a

measured amount of product. The echo output will allow this logger to be connected in conjun

device requiring use of the same pulse output.

sed for general input application.

V) -

This output can be used to operated a valve, solenoid or similar device.

volatile memory

- This logger can record in excess of 11000

records for later download.

Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

transmitted at programmable intervals

Remote programming of all setup parameters via GPRS link or SMS.

Ideal for leak detection, alarming and water shut

-off control to prevent water loss.

Onboard Bluetooth can stream diagnostic information about signal strength,

etwork status etc.

utton and LED's for manual wakeup to server and diagnostic purposes etc.

slot class 12/ EDGE multi

-slot class 12/ 3G (UMTS/HSPA) Modem Technology

power with battery failover and sleep

All management software supplied free

3 x D cells

utput

(application dependent)

onth

Configuration and diagnostics through Bluetooth interface

time when powered by mains or 12V supply

Size 175mm x 180mm x 78mm (including cable glands)

20°C to 80°C humidity

≤ 90% non condensing. Check battery specifications for low power systems

PAGE

ogger can generate a stable 24V output at a maximum

of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need

Pulse inputs are used on metering devices that supply a pulse output for a

measured amount of product. The echo output will allow this logger to be connected in conjun

ction with another

This output can be used to operated a valve, solenoid or similar device.

records for later download.

Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

etwork status etc.

≤ 90% non condensing. Check battery specifications for low power systems

USER

MANUAL :

DOCUMENT

NAME

1.4 Architecture

Bluetooth

Interface

Central

Processor

3G GSM

Interface

Non volatile

memory

Onboard Mains

Power Supply

3 x

Batteries

Power

Management

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Bluetooth

Interface

Central

Processor

GPS Satellite

Receiver

Input / Output

Interface

3 x

Alkaline

Batteries

External 12V

Power Supply

Power

Management

2 wire Isolated

20mA

2x Pulse Inputs

with echo output

ECO Interface

1x Digital Input

24V 30mA

Generator

1x Digital

PAGE

2 wire Isolated

20mA

Input

2x Pulse Inputs

with echo output

ECO Interface

1x Digital Input

1x Digital

Output

USER

MANUAL :

DOCUMENT

NAME

1.5 Power Modes

The Cumulus Pulse

Logger can operate in one of three power configurations.

 Mains powered -

in this mode the logger can be continuously connected to the server allowing for the streaming

of live data.

 Battery powered - The

Cumulus Pulse

depending on the operation

. In this mode, the logger will 'wakeup' (

recorded data to a remote database.

 External 12V (8-15V) 2A supply -

same as a

logger will automatically switch to battery mode should the power fail.

1.6 LED Functions

LED's indicate the following:

Blue LED - Bluetooth status

 Flashing indicates the B

luetooth is ready to r



Solid light indicates and active connection

Red LED - GSM status

 Solid -

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

 Fast flash -

Logger is currently initiating a connection to the server

 Slow Flash -

Connection has been established to the server

1.7 Pushbutton Functions

The Cumulus Pulse

logger has a pushbutton to allow for local functions. Mostly used in the Battery mod

as follows.



Single short push will turn the Bluetooth radio on and off (normally permanently on in Mains mode)



A push of more than 3 seconds will re

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Logger can operate in one of three power configurations.

in this mode the logger can be continuously connected to the server allowing for the streaming

Cumulus Pulse

logger uses standard 'D' Cell alkal

ine batteries that will last several years

. In this mode, the logger will 'wakeup' (

adjustable -

normally 6 hourly) and upload its

recorded data to a remote database.

same as a

mains operated logger. In this mode,

batteries

logger will automatically switch to battery mode should the power fail.

This is known as the 'Dual' mode.

luetooth is ready to r

eceive an incoming connection

Solid light indicates and active connection

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

Logger is currently initiating a connection to the server

Connection has been established to the server

logger has a pushbutton to allow for local functions. Mostly used in the Battery mod

Single short push will turn the Bluetooth radio on and off (normally permanently on in Mains mode)

A push of more than 3 seconds will re

sult in the logger establishing a connection

to the server.

PAGE

in this mode the logger can be continuously connected to the server allowing for the streaming

ine batteries that will last several years

normally 6 hourly) and upload its

batteries

can be fitted and the

This is known as the 'Dual' mode.

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

logger has a pushbutton to allow for local functions. Mostly used in the Battery mod

e, the button works

Single short push will turn the Bluetooth radio on and off (normally permanently on in Mains mode)

to the server.

USER

MANUAL :

DOCUMENT

NAME

1.8 Connections

Connections are available on a series of terminal connectors labelled from 1 to 22.

These connections are as follows:

1. External Power Supply / Solar system

ground (optional)

2. External 12V Power Supply

/ Solar system

3. Digital output c

onnection (switch to ground)

4. Ground connection for the digital output

5. 24V 30mA max power generator output (used for powering a current loop device)

6. Ground for the 24V generator

7. Negative connection for 4-

20mA isolated loop input

8. Positive connection for 4-

20mA isolated loop input

9. Pulse 1 input

10. Ground for Pulse 1 input

11. Ground for Pulse 1 output (pulse splitter output)

12. Pulse 1 pulse splitter output

(switch to ground)

13. Pulse 2 input

14. Ground for Pulse 2 input

15. Ground for Pulse 2 output (pulse splitter output)

16. Pulse 2 pulse splitter output (switch to ground)

17. Digital input

18. Ground for digital input

19. ECO interface TX line

20. ECO interface RX line

21. ECO interface ground line

22. Earthing connection ECO interface

input (transient voltage protection)

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Connections are available on a series of terminal connectors labelled from 1 to 22.

ground (optional)

/ Solar system

(optional)

onnection (switch to ground)

5. 24V 30mA max power generator output (used for powering a current loop device)

20mA isolated loop input

11. Ground for Pulse 1 output (pulse splitter output)

(switch to ground)

15. Ground for Pulse 2 output (pulse splitter output)

16. Pulse 2 pulse splitter output (switch to ground)

input (transient voltage protection)

PAGE

USER

MANUAL :

DOCUMENT

NAME

1.8.1

External Power Supply / Solar System

The CDS541 Cumulus Pulse

logger can be powered entirely from an external 12V (8

source.

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

into dual mode. In this mode, while ther

e is solar power available, the logger will remain online with the server. Should the

solar power fail, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is id

for remote applications where there is no

mains power available and streaming data is required.

1.8.2

Using the Digital Output

The output on the CDS541

Logger can be used to switch a DC device of up to 500mA at a maximum of 50V. This output is an

open drain output that will switch to ground.

overloaded. Should this happen, please disconnect all the power, wait for 1 minute and the fuse will reset itself. Repeated

overloading could cause the fuse to eventually fail.

Example

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

External Power Supply / Solar System

Connection

logger can be powered entirely from an external 12V (8

-15V) 2A

power supply or solar p

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

e is solar power available, the logger will remain online with the server. Should the

solar power fail, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is id

mains power available and streaming data is required.

Logger can be used to switch a DC device of up to 500mA at a maximum of 50V. This output is an

open drain output that will switch to ground.

This ou

tput is protected by a 500mA resettable fuse so it will trip if

overloaded. Should this happen, please disconnect all the power, wait for 1 minute and the fuse will reset itself. Repeated

overloading could cause the fuse to eventually fail.

Example

configuration for operating a 24V Valve

PAGE

power supply or solar p

ower

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

e is solar power available, the logger will remain online with the server. Should the

solar power fail, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is id

eal

Logger can be used to switch a DC device of up to 500mA at a maximum of 50V. This output is an

tput is protected by a 500mA resettable fuse so it will trip if

overloaded. Should this happen, please disconnect all the power, wait for 1 minute and the fuse will reset itself. Repeated

USER

MANUAL :

DOCUMENT

NAME

1.8.3

Using the Digital Input

The input of the Cumulus Pulse

logger is designed to connect to a volt free mechanical or electronic switch. The logger has

its own internal pullup resistor.

Example for connecting to a vo

Example for connecting to an Open Collector electronic switch

1.8.4

Using the 4-

20mA loop input

The Cumulus Pulse

logger is equipped with a fully isolated (optical) 4

applications and should be connected as below. Please take note of the polarity of the loop connections.

MANUAL :

CDS541 CUMULUS PULSE LOGGER

NAME

CLASSIFICATION

DATE

PAGE

logger is designed to connect to a volt free mechanical or electronic switch. The logger has

Example for connecting to a vo

lt free contact

Example for connecting to an Open Collector electronic switch

note that pin 18 must be the ground connection

20mA loop input

and 24V loop power generator

logger is equipped with a fully isolated (optical) 4

20mA interface. This interface is configured for 2 wire

applications and should be connected as below. Please take note of the polarity of the loop connections.

PAGE

logger is designed to connect to a volt free mechanical or electronic switch. The logger has

note that pin 18 must be the ground connection

20mA interface. This interface is configured for 2 wire

applications and should be connected as below. Please take note of the polarity of the loop connections.

Indice

Altri manuali cloudworks Registratore di dati

cloudworks

cloudworks CDS551 Manuale utente

cloudworks

cloudworks CDS545 Manuale utente

cloudworks

cloudworks CDS552 Manuale utente

cloudworks

cloudworks CDS547 Manuale utente

cloudworks

cloudworks CDS543 Manuale utente

cloudworks

cloudworks Nimbus Loop Logger Manuale utente

Manuali Registratore di dati popolari di altre marche

TESTO

TESTO 176 Manuale utente

HT Italia

HT Italia XL421 Manuale utente

HBM

HBM SOMAT XR CX22B-R Manuale utente

Agtrix

Agtrix 380i Manuale utente

Hobo

Hobo H8 Pro Manuale utente

Beijing ART Tech

Beijing ART Tech PCI2320 Manuale utente

Athena

Athena GET SL1 Manuale utente

Motec Systems

Motec Systems C185 Manuale utente

Beijing ART Tech

Beijing ART Tech USB2832 Manuale utente

Rotronic

Rotronic HygroLog HL20 Manuale utente

MRC

MRC DW-6092 Manuale utente

Racelogic

Racelogic VBOX LapTimer Manuale utente

Edu-Logger

Edu-Logger 900-240 Manuale utente

Elma

Elma DT173 Manuale utente

MadgeTech

MadgeTech PRTemp140 Scheda tecnica

Comet

Comet U0121M Manuale utente

pico Technology

pico Technology PT-104 Manuale utente

Soil Instruments

Soil Instruments GTecLink Manuale utente

cloudworks CDS541 Manuale utente

Manuali Registratore di dati popolari di altre marche