Cloudworks CDS551 Manuale utente

USER

MANUAL :

DOCUMENT

NAME

CDS551

Cirrus

Document Number:

Client:

Date:

Issue:

Status:

Classification:

S/W File Name

This document contains information relating to the rights of

agreement provisions are applicable to this document. When no longer needed for authorised

purposes, this document must be destroyed or returned to

Cape Digital Solutions

reserves the right to change the

without prior notice.

The contents of this manual is the property

without prior permission, in writing, from

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Cirrus

Modbus Logger User Manual

CDS551 Cirrus Modbus Logger User Manual

User

1 December 2020

V1.0

Draft

Confidential

CDS551 Cirrus Modbus Logger User Manual.docx

This document contains information relating to the rights of

Cape Digital Solutions

. The confidentiality

agreement provisions are applicable to this document. When no longer needed for authorised

purposes, this document must be destroyed or returned to

Cape Digital Solutions.

reserves the right to change the

design or specifications of their products

The contents of this manual is the property

of Cape Digital Solutions

and may not be copied or modified

without prior permission, in writing, from

Cape Digital Solutions, Cape Town, South Africa.

PAGE

. The confidentiality

agreement provisions are applicable to this document. When no longer needed for authorised

design or specifications of their products

and may not be copied or modified

USER

MANUAL :

DOCUMENT

NAME

Issue Date

V01 13 July 2021

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

AMENDMENT HISTORY

Amendment Details

Amended By

Compile document

Alex Romanov

PAGE

Amended By

Alex Romanov

USER

MANUAL :

DOCUMENT

NAME

Table of Contents

CDS551 Cirrus

Modbus Logger

1.1

Introduction ................................

................................

1.2

Features ................................

................................

1.3

Specifications

................................

1.4

Architecture ................................

................................

1.5

Power Modes

................................

1.6

LED and button functions

................................

1.6.1

LED functions

................................

1.6.2

Pushbutton Functions

................................

1.7

Connections

................................

1.7.1

External Power Supply / Solar System Connection

1.7.2

Using the 4-

20mA loop input and 24V loop power generator

1.7.3

Using the RS485/Modbus interface

1.8

Sim card and battery installation

................................

1.9

Installation considerations

................................

Logger Setup

................................

2.1

Setup via Bluetooth Configure

................................

2.2

Setup via Remote Configure

................................

2.3

tup via Offline Script Configure

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Modbus Logger

................................

...........................

................................

...............................

................................

................................................................

.......................

................................

..........................

................................

................................................................

.......................

................................

................................................................

...............

................................

................................................................

.........................

External Power Supply / Solar System Connection

................................

.....................

20mA loop input and 24V loop power generator

................................

Using the RS485/Modbus interface

................................................................

...........

................................

........................

................................

..............................

................................

...........................

................................

..............................

tup via Offline Script Configure

................................................................

......................

PAGE

................................

.. 4

...........................

...............................

.......................

..........................

.......................

................................

..... 7

...............

................................

... 7

.........................

.....................

................................

...... 9

...........

........................

................................

.. 14

..............................

...........................

..............................

......................

USER

MANUAL :

DOCUMENT

NAME

1 CDS551 CIRRUS MODBUS

LOGGER

1.1 Introduction

The Cirrus Modbus

logger is a robust, sophisticated

making it ideal for a large number of

measurement applications

Communication to your own server

and database can be achieved

on these

servers is supplied free of charge.

setup without the need for a complicated se

supplied free of charge to

allow clients to manage their own networks and data. There are no monthly charges for

collecting and hosting data as the client can provide this service themselves

1.2 Features

 Uses

GPRS/EDGE/LTE/4G technology.

world will soon no longer be supporting older GPRS/3G technologies, rendering these legacy dataloggers obsolete.

This has already started happening in many countries around the world.

 Bluetooth interface -

setup and manual data

the need for cables that invariable fail during continuous use.

 Optional external power operation

 Uses standard off-the-shelf a

lkaline batteries. This logger uses

excess of 5 years under normal usage. Many other loggers use

obtain. Other problems involving l

ithium batteries are the restrictions when shipping using airfreight. All

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines

are no longer allowing these batteries on their aircraft.

 Onboard

Modbus/RS485 interface. The Modbus/RS485 interface can be used

sensing equipment. This port is also well protected against large voltage transients.

 Isolated 4-

20mA interface. Used for any sensing device with a 4

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

LOGGER

logger is a robust, sophisticated

LTE/4G

GSM logger/controller with a wide range of input capabilities,

measurement applications

and database can be achieved

via

the internet or a private APN.

servers is supplied free of charge.

The Cirrus Modbus

Logger has been designed to allow for easy installation and

setup without the need for a complicated se

rver infrastructure. Setup and m

anagement software (CloudWorks) is

allow clients to manage their own networks and data. There are no monthly charges for

collecting and hosting data as the client can provide this service themselves

GPRS/EDGE/LTE/4G technology.

4G has become essential as many cellular

network providers around the

world will soon no longer be supporting older GPRS/3G technologies, rendering these legacy dataloggers obsolete.

This has already started happening in many countries around the world.

setup and manual data

collection can be achieved through the Bluetooth interface negating

the need for cables that invariable fail during continuous use.

with battery failover.

lkaline batteries. This logger uses

3x standard D Cell alkaline batteries that

excess of 5 years under normal usage. Many other loggers use

ithium batteries that are expensive and difficult to

ithium batteries are the restrictions when shipping using airfreight. All

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines

are no longer allowing these batteries on their aircraft.

Modbus/RS485 interface. The Modbus/RS485 interface can be used

n a large number applications or

sensing equipment. This port is also well protected against large voltage transients.

20mA interface. Used for any sensing device with a 4

-20mA output.

PAGE

GSM logger/controller with a wide range of input capabilities,

the internet or a private APN.

The software running

Logger has been designed to allow for easy installation and

anagement software (CloudWorks) is

also

allow clients to manage their own networks and data. There are no monthly charges for

network providers around the

world will soon no longer be supporting older GPRS/3G technologies, rendering these legacy dataloggers obsolete.

collection can be achieved through the Bluetooth interface negating

3x standard D Cell alkaline batteries that

can last in

ithium batteries that are expensive and difficult to

ithium batteries are the restrictions when shipping using airfreight. All

lithium

batteries need to be shipped as hazardous cargo that is becoming increasingly difficult to achieve as many airlines

n a large number applications or

USER

MANUAL :

DOCUMENT

NAME



Onboard 24V 30mA power generator. The

of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need

for a secondary power su

pply. This option will also function under battery operation.

 Large onboard non-

volatile memory

dependent).



Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

transmitted at programmable intervals.



Remote programming of all setup parameters via GPRS link or SMS.



Ideal for leak detection, alarming to prevent



Onboard Bluetooth can stream diagnostic information about signal strength,

 Touch sensitive button

and LED's for manual wakeup to server and diagnostic purposes etc.

1.3 Specifications



GPRS/EDGE/ LTE/4G Modem Technology

 LTE-

FDD B1/B3/B5/B7/B8/B20/B28

 LTE-TDD B38/B40/B41



GSM 850MHz/900MHz/1800MHz/1900MHz

 Bluetooth interface



Option of external power with battery failover and sleep



All management software supplied free

 Standard Alkaline Batteries -

3 x D cells (5+ years)

 RS485 Modbus Port (2-wire)

 Isolated 4-20mA Input port



24V 30mA Generated Power Output



Up to 20000 record datalog memory (application dependent)

 Full SMS driven command set



Logging intervals 1 minute to 1 month

 Rugged housing with seal eye



Touch sensitive button and LED Diagnostics



Configuration and diagnostics through Bluetooth interface

 Fully configurable remotely

 Stream data in real-

time when powered by external supply



Size 185mm x 130mm x 55mm (including cable gland

 Housing Protection Class : IP68 -

Max 1.2m, 30 days

 Environment : -

20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems

 Uses a Micro SIM card

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Onboard 24V 30mA power generator. The

Cirrus Modbus l

ogger can generate a stable 24V output at a maximum

of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need

pply. This option will also function under battery operation.

volatile memory

- This logger can record in excess of 20000 datalog

records

Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

transmitted at programmable intervals.

Remote programming of all setup parameters via GPRS link or SMS.

Ideal for leak detection, alarming to prevent

water loss.

Onboard Bluetooth can stream diagnostic information about signal strength,

etwork status etc.

and LED's for manual wakeup to server and diagnostic purposes etc.

GPRS/EDGE/ LTE/4G Modem Technology

FDD B1/B3/B5/B7/B8/B20/B28

GSM 850MHz/900MHz/1800MHz/1900MHz

Option of external power with battery failover and sleep

All management software supplied free

3 x D cells (5+ years)

24V 30mA Generated Power Output

Up to 20000 record datalog memory (application dependent)

Logging intervals 1 minute to 1 month

Touch sensitive button and LED Diagnostics

Configuration and diagnostics through Bluetooth interface

time when powered by external supply

Size 185mm x 130mm x 55mm (including cable gland

Max 1.2m, 30 days

20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems

PAGE

ogger can generate a stable 24V output at a maximum

of 30mA allowing for the powering of an external piece of equipment or current loop device eliminating the need

records

(application

Logging intervals from 1 minute to 1 month. Information is internally logged, time and date stamped and

etwork status etc.

and LED's for manual wakeup to server and diagnostic purposes etc.

20°C to 80°C humidity = 90% non condensing. Check battery specifications for low power systems

USER

MANUAL :

DOCUMENT

NAME

1.4 Architecture

1.5 Power Modes

The Cirrus Modbus

Logger can operate in one of

 Mains powered -

in this mode the logger can be continuously connected to the server allowing for the streaming

of live data.

 Battery powered - The Cirrus

Modbus

depending on the operation

. In this mode, the logger will 'wakeup' (

recorded data to a remote database.

 External 12V (8-15V) 2A supply -

in this mode the logger can be continuously connected to the server allowing for

the streaming of live data. B

atteries

the power fail.

Bluetooth

Interface

Central

Processor

LTE/4G GSM

Interface

Non volatile

memory

3 x

Batteries

External 12V

Power Supply

Power

Management

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

Logger can operate in one of

two power configurations.

in this mode the logger can be continuously connected to the server allowing for the streaming

Modbus

logger uses standard 'D' Cell alkal

ine batteries that will last several years

. In this mode, the logger will 'wakeup' (

adjustable -

normally 6 hourly) and upload its

recorded data to a remote database.

in this mode the logger can be continuously connected to the server allowing for

atteries

can be fitted and the logger will automatically switch to battery mode should

Bluetooth

Interface

Central

Processor

Input

Interface

3 x

Alkaline

Batteries

Power

Management

2 wire Isolated

20mA

RS485 /

Modbus

24V 30mA

Generator

PAGE

in this mode the logger can be continuously connected to the server allowing for the streaming

ine batteries that will last several years

normally 6 hourly) and upload its

in this mode the logger can be continuously connected to the server allowing for

can be fitted and the logger will automatically switch to battery mode should

2 wire Isolated

20mA

Input

RS485 /

Modbus

USER

MANUAL :

DOCUMENT

NAME

1.6 LED and button functions

On the front of the logger, there are 2 LED

's and a touch sensitive 'SELECT' button.

is the Bluetooth reset button.

1.6.1

LED functions

Blue LED - Bluetooth status

 Flashing indicates the B

luetooth is ready to receive



Solid light indicates and active connection

Red LED - Logger status

 Solid -

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

 Fast flash -

Logger is currently initiating a connection to the serve

 Slow Flash -

Connection has been established to the server

1.6.2

Pushbutton Functions

SELECT touch button - P

lease note, this button is touch sensitive in order to maintain the waterproof status of the housing.

 Single short push will toggle

the Bluetooth r



A push of more than 3 seconds will result in the logger establishing a connection

datalog.

BLUETOOTH RESET button -

This button is used to reset the Bluetooth interface in the event of a lost password or generally

configuration loss.

The Bluetooth interface of this logger can be configured to have a access password which will limit external ac

those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to

disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later

this document.

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

's and a touch sensitive 'SELECT' button.

Internally on the reverse side of the lid

luetooth is ready to receive

an incoming connection

Solid light indicates and active connection

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

Logger is currently initiating a connection to the serve

Connection has been established to the server

lease note, this button is touch sensitive in order to maintain the waterproof status of the housing.

the Bluetooth r

adio on and off.

A push of more than 3 seconds will result in the logger establishing a connection

to the server

This button is used to reset the Bluetooth interface in the event of a lost password or generally

The Bluetooth interface of this logger can be configured to have a access password which will limit external ac

those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to

disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later

PAGE

Internally on the reverse side of the lid

Logger is in Command Mode (normally accompanied by an active Bluetooth connection)

lease note, this button is touch sensitive in order to maintain the waterproof status of the housing.

to the server

and uploading its

This button is used to reset the Bluetooth interface in the event of a lost password or generally

The Bluetooth interface of this logger can be configured to have a access password which will limit external ac

cess to only

those issued the password. Should this password get lost, the logger can be opened and the Bluetooth interface reset to

disable the security. It is advisable to then connect to the logger again and setup a new password. This is explained later

USER

MANUAL :

DOCUMENT

NAME

In order to reset the Bluetooth interface,

with the housing open,

 Remove all power from the logger



Press and hold the Bluetooth reset



Power up the logger again while holding the button.

pressed.



Once the Red Status LED comes on again, the button can be released.



This will now reset the Bluetooth interface.

1.7 Connections

Connections are available on a series of

10 terminal connectors

These connections are as follows:

1. External Power Supply / Solar system

ground (optional)

2. External 12V Power Supply

/ Solar system

3. 24V 30mA max power generator output

(used for powering a current loop device)

4. Ground for the 24V generator

5. Isolated negative connection for 4-

20mA isolated loop input

6. Isolated positive connection for 4-

20mA isolated loop input

7. Modbus/RS485 Data positive input (D+)

8. Modbus/RS485 Data negative input (D-)

9. Isolated ground for Modbus/RS485 input

. Earthing connection Modbus/RS485 input (transient voltage protection)

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

with the housing open,

please follow the below procedure.

emember to remove the batteries if external power is present.

Press and hold the Bluetooth reset

button.

Power up the logger again while holding the button.

Bluetooth LED will be on confirming the button has been

Once the Red Status LED comes on again, the button can be released.

This will now reset the Bluetooth interface.

10 terminal connectors

ground (optional)

/ Solar system

(optional)

(used for powering a current loop device)

20mA isolated loop input

. Earthing connection Modbus/RS485 input (transient voltage protection)

PAGE

please follow the below procedure.

emember to remove the batteries if external power is present.

Bluetooth LED will be on confirming the button has been

USER

MANUAL :

DOCUMENT

NAME

1.7.1

External Power Supply / Solar System

The CDS551 Cirrus Modbus

logger can be powered entirely from an external 12V (8

source.

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

into dual mode. In this mode, while ther

e is solar power available, the logger will remain online with the server. Should the

solar power fail, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is id

for remote applications where there is no

mains power available and streaming data is required.

1.7.2

Using the 4-

20mA loop input

The Cirrus Modbus

logger is equipped with a fully isolated (optical) 4

applications and should be connected as below. Please take note of the polarity of the loop connections.

To assist with the powering of loop devic

es, the

generator. This generator is designed

to provide the power for devices that source this directly off the loop

maximum power to flow on a 4-20mA

loop, should be 2

30mA. Please note, using the 24V power g

enerator to power a loop device

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

External Power Supply / Solar System

Connection

logger can be powered entirely from an external 12V (8

-15V) 2A

power supply or solar p

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

e is solar power available, the logger will remain online with the server. Should the

solar power fail, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is id

mains power available and streaming data is required.

20mA loop input

and 24V loop power generator

logger is equipped with a fully isolated (optical) 4

20mA interface. This interface is configured for 2 wire

applications and should be connected as below. Please take note of the polarity of the loop connections.

es, the

Cirrus Modbus

logger is equipped with an onboard 24V loop power

to provide the power for devices that source this directly off the loop

loop, should be 2

0mA, the generator has been desi

gned to supply a maximum of

enerator to power a loop device

uses a substantial amo

PAGE

power supply or solar p

ower

Using a solar power source and also populating the logger with alkaline batteries means that the logger can be put

e is solar power available, the logger will remain online with the server. Should the

solar power fail, the logger will automatically switch to 'battery' mode until the solar power source is restored. This is id

eal

20mA interface. This interface is configured for 2 wire

applications and should be connected as below. Please take note of the polarity of the loop connections.

logger is equipped with an onboard 24V loop power

to provide the power for devices that source this directly off the loop

. Since the

gned to supply a maximum of

uses a substantial amo

unt of power. For this

USER

MANUAL :

DOCUMENT

NAME

reason, in battery operated devices, t

he loop should only be powered each time the device n

achieved by setting the generator into 'L

oop

Example configuration of the generator supplying power to a loop powered device

1.7.3

Using the RS485/Modbus interfac

The Cirrus Modbus

logger is equipped with a fully isolated RS485/Modbus interface. This interface is used for the

connection to specific equipment with these kinds of output interfaces. e.g. ABB Aquamaster flow meters. These available

devices are normally listed in the Clo

udWorks software as specific applications. Below are the connections for a

Aquamaster flow meter.

MANUAL :

CDS551 CIRRUS MODBUS LOGGER

NAME

CLASSIFICATION

DATE

PAGE

he loop should only be powered each time the device n

eeds to be read.

oop

Power' mode.

Example configuration of the generator supplying power to a loop powered device

Using the RS485/Modbus interfac

logger is equipped with a fully isolated RS485/Modbus interface. This interface is used for the

connection to specific equipment with these kinds of output interfaces. e.g. ABB Aquamaster flow meters. These available

udWorks software as specific applications. Below are the connections for a

PAGE

eeds to be read.

This can be

Example configuration of the generator supplying power to a loop powered device

logger is equipped with a fully isolated RS485/Modbus interface. This interface is used for the

connection to specific equipment with these kinds of output interfaces. e.g. ABB Aquamaster flow meters. These available

udWorks software as specific applications. Below are the connections for a

Indice

Altri manuali cloudworks Registratore di dati

cloudworks

cloudworks CDS552 Manuale utente

cloudworks

cloudworks CDS545 Manuale utente

cloudworks

cloudworks CDS541 Manuale utente

cloudworks

cloudworks CDS543 Manuale utente

cloudworks

cloudworks CDS547 Manuale utente

cloudworks

cloudworks Nimbus Loop Logger Manuale utente

Manuali Registratore di dati popolari di altre marche

TESTO

TESTO 176 Manuale utente

HT Italia

HT Italia XL421 Manuale utente

HBM

HBM SOMAT XR CX22B-R Manuale utente

Agtrix

Agtrix 380i Manuale utente

Hobo

Hobo H8 Pro Manuale utente

Beijing ART Tech

Beijing ART Tech PCI2320 Manuale utente

Athena

Athena GET SL1 Manuale utente

Motec Systems

Motec Systems C185 Manuale utente

Beijing ART Tech

Beijing ART Tech USB2832 Manuale utente

Rotronic

Rotronic HygroLog HL20 Manuale utente

MRC

MRC DW-6092 Manuale utente

Racelogic

Racelogic VBOX LapTimer Manuale utente

Edu-Logger

Edu-Logger 900-240 Manuale utente

Elma

Elma DT173 Manuale utente

MadgeTech

MadgeTech PRTemp140 Scheda tecnica

Comet

Comet U0121M Manuale utente

pico Technology

pico Technology PT-104 Manuale utente

Soil Instruments

Soil Instruments GTecLink Manuale utente

cloudworks CDS551 Manuale utente

Manuali Registratore di dati popolari di altre marche