Clover HDC211 Manuale utente

INSTRUCTION

MANUAL

TRUE DAY/NIGHT

VARI-FOCAL COLOR DOME CAMERA

MODEL HDC211

•To avoid electrical shock, do not open the case of this product.

•Do not stamp fingerprints on the lens.

•Operate this product using only the recommended AC Power supply.

•Do not overload electrical outlets or extension cords; this can result in fire or electric

shock.

•Keep this product away from strong magnetic fields.

•Do not expose this product in direct sunlight or strong reflected rays.

•Refer servicing to qualified personnel only.

•Do not change or modify this product, the warranty will be voided.

•Weatherproof (IP67)

•1/3” Sony Super HAD CCD

•High Resolution 550 TV Lines (Color), 600 TV Lines (B/W)

•True Day/Night (Built-in ICR: IR Cut Filter Removal)

•3D DNR (Digital Noise Reduction) with 3D filter

•D-WDR (Digital Wide Dynamic Range)

•3-Axis Gimbals Bracket

•Total 33 Infrared LEDs with a CDS sensor

•Up to 100’ IR range (depends on scene reflection)

•DC Auto Iris Vari-focal Lens (2.8-12mm)

•Dual Voltage(AC 24V/DC 12V)

1. Loosen the locking screw①with the provided hex-head wrench and turn the locking

ring②counter-clockwise to remove the transparent dome③.

2. Attach the camera base④to the wall or ceiling, wherever you want to install the

camera. Locate a wall stud or ceiling joist and secure the camera base④using the

supplied screws⑤.

3. How to set angle of view:

- Loosen the screws⑥ for tilting and adjust the camera direction by moving the

camera body⑧up or down, then fix the screws firmly.

- Turn the mounting bracket (metal part) covering the camera body⑧left or right for

panning adjustment.

- Loosen the locking knob⑦ and turn the camera body⑧clockwise or counter-

clockwise to upright images on the screen.

PRECAUTIONS

FEATURES

INSTALLATION

4. If necessary, change the settings to get the best images depending on your application

by using the buttons in the camera (refer to the instruction manual for OSD control).

5. Assemble the transparent dome③by turning the locking ring②clockwise. The

locking ring②should be securely fastened so that water can not leak into the camera.

6. Connect the one end of BNC cable (not supplied) to the BNC (F) of 5’ cable attached

to the camera and the other end (BNC) of cable to the video devices such as DVR,

monitor/TV. Plug an AC power supply (not supplied) to the DC jack (red) on the

camera.

1. Vari-focal lens①

Easily changeable angle of view: 2.8 to 12mm

2. T↔W (Tele ↔Wide)③

Turn this adjustment knob③clockwise or counter-clockwise to set the focal length.

3. ∞↔N②

Turn this adjustment knob②clockwise or counter-clockwise to set the focus.

4. After setting the focus and focal length, the adjustment knob② and ③ should be

securely fastened.

5. Do not stamp your fingerprint on the lens and dome, which may affect picture quality.

HOW TO ADJUST ANGLE OF VIEW

If the camera does not function properly, check the following points before contacting the

service center.

Troubles Remedies

No video Check the AC adapter and video cable

between the camera and a monitor

The image on the screen is dark Check the brightness control on the

monitor

The image on the screen is dim Check if the lens is stained. If dirty,

clean it with soft and clean cloth

The camera is not working properly, and

the surface of the camera case is hot

Check if you have connected the

provided AC adapter

The contrast on the screen is too weak Adjust the contrast feature of the

monitor. If the camera is exposed under

too strong light, change the position

The image on the screen flickers Does the camera face to directly to the

sunlight or fluorescent light? Change the

camera position

Picture rolls and jumps, scrambled

picture

Improper V-hold control. Setting on your

monitor

Picture smaller than screen House current may be too low

Note:

▪ Apply DC12V 1 A regulated power supply (not included).

▪ To avoid fire or shock hazard, use a UL listed power supply.

TROUBLE SHOOTING

•Image sensor 1/3” SONY Super HAD CCD

•Total pixels 811(H) x 508(V)

•Effective Pixels 768(H) x 494(V)

•Scanning system 2:1 Interlace

•O.S.D Available

•Backlight Off / HSBLC / BLC selectable

•Resolution 550TV Lines(color),600TV Lines(B/W)

•S/N (Y signal) 52dB (AGC Off, Weight On)

•Min.illumination 0.000006Lux(IR LED ON)

•White Balance ATW / AWB / Manual / AWC→SET

•Sense-up Off / Auto / (Selectable limit x2 ~ x258)

•3 DNR Off / On (1~50 level adjustable)

•D-WDR Indoor / Outdoor / Off

•D&N selection Color / BW / Auto

•Digital zoom On(x32) / Off

•Hosing material Die cast Aluminum alloy

•Dome material Polycarbonate

•Voltage AC 24V / DC 12V(Dual voltage)

•Current consumption 480 mA( LED: On), 170 mA(LED: Off)

•Lens

DC Auto Iris Varifocal Lens (2.8mm-12mm)

•Operating temperature/Humidity -10°C ~ +50°C. RH 95% Max.

•Storage temperature/Humidity -20°C ~ +60°C. RH 95% Max.

•Dimensions 140 (Ф) x 100mm

•Weight 2 Lbs

This warranty gives the original purchaser specific legal rights and you may also have

other rights, which vary from state to state. If our products do not function because of any

defect in material or workmanship, we will repair free of charges for 2 years on parts and

labor from the date of original purchase. This warranty does not cover modification,

abuse, incidental or consequential damages unless the state of owner’s residence specially

prohibits limitations on incidental or consequential damages.

SPECIFICATIONS

LIMITED 2 YEAR WARRANTY

1. Original purchaser must fill out a warranty card and mail it to the factory with model

number, serial number and the date of purchase.

2. We will repair or replace, and return to the owner the system under this limited

warranty.

3. Please pack the system carefully and securely using the original packing materials,

and send it prepaid and insured to: 13073 E. 166th St, Cerritos, CA 90703.

4. Please include a check for $20.00 to cover the cost of return postage and handling. If

the system is returned within the warranty period, please include a proof of purchase.

If the system is out of warranty, you will receive an estimate of the repair cost for

your approval before repair work will be begun.

CDR0460 Stand-alone 4 CH Digital Video Recorder (DVR)

CDR4450 Stand-alone 4 CH Digital Video Recorder (DVR)

CDR0860 Stand-alone 8 CH Digital Video Recorder (DVR)

CDR1660 Stand-alone 16 CH Digital Video Recorder (DVR)

CDR0850 Stand-alone 8 CH Digital Video Recorder (DVR)

CDR1650 Stand-alone 16 CH Digital Video Recorder (DVR)

CA100BP 100’ BNC/Power to BNC/Power Extension cable and coupler

ADT121500 AC Power Supply DC12V 1.5 A Regulated

1-Day & Night Vari-focal Color Dome Camera

1-Hardware Accessories Kit

1-Instruction Manual

1-Instruction Manual for OSD Control

1-Warranty Registration Card

HOW TO OBTAIN FACTORY SERVICE

AVAILABLE ACCESSORIES

PACKAGE INCLUDES

Indice

Altri manuali Clover Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente