CMT IC202 Manuale utente

802.11 b/g Wireless IP Camera

Model : IC202/IC202w

User Manual

Revision: 1.07

Date: 2008/3/5

For firmware version v010612

CMT IP CAM IC202/w

Table of Contents

LIST OF FIGURES AND TABLES......................................................................................................4

1. INTRODUCTION..........................................................................................................................6

2. HARDWARE DESCRIPTION AND QUICK INSTALLATION/USAGE ................................7

2.1. MAJOR HARDWARE COMPONENTS.......................................................................................7

2.2. QUICK INSTALLATION AND USAGE ........................................................................................8

2.3. WIRELESS CONNECTION (FOR IC202W).............................................................................12

3. WEB CONFIGURATIONS........................................................................................................14

3.1. INFORMATION ......................................................................................................................15

3.2. VIDEO DISPLAY ...................................................................................................................16

3.3. NETWORK............................................................................................................................17

3.4. WIFI SECURITY (FOR IC202W)...........................................................................................19

3.5. ADVANCED NETWORK.........................................................................................................21

3.6. VIDEO SETTINGS.................................................................................................................22

3.7. 3GPP/RTSPSETTINGS......................................................................................................24

3.8. MOTION DETECTION............................................................................................................25

3.9. LED DISPLAY CONTROL......................................................................................................27

3.10. DATE/TIME...........................................................................................................................28

3.11. ADMIN..................................................................................................................................29

3.12. UPGRADE ............................................................................................................................30

3.13. REBOOT...............................................................................................................................31

3.14. SAFE MODE.........................................................................................................................32

3.15. SET TO FACTORY DEFAULT..................................................................................................33

4. FEATURES AND SPECIFICATIONS......................................................................................34

4.1. FEATURES ...........................................................................................................................34

4.2. SPECIFICATIONS..................................................................................................................35

5. PACKAGE CONTENTS............................................................................................................37

APPENDIX A. LIST OF TESTED NAT/ROUTER DEVICES........................................................38

APPENDIX B. MAXIMUM ALLOWED VIDEO USERS.................................................................39

APPENDIX C. PERFORMANCE INFORMATION .........................................................................40

APPENDIX D. TROUBLE SHOOTING............................................................................................41

APPENDIX E. 3GPP/ISMA OPERATION........................................................................................43

CMT IP CAM IC202/w

APPENDIX F. THIRD PARTY AND EMBEDDED WEB PAGE INTEGRATION........................44

CMT IP CAM IC202/w

List of Figures and Tables

Figure 2-1: Major components in the front panel

Figure 2-2: Major components in the back panel

Figure 2-3: IP CAM connection diagram.

Figure 2-4: Connect Ethernet cable to a switch/router.

Figure 2-5: The installation CD disk

Figure 2-6: The ID/Password card

Figure 2-7: Running window of CamView program

Figure 2-8: Pop-up play-video password window

Figure 2-9: Unplug the Ethernet cable to enable the WiFi function

Figure 3-1: Open the web configuration page from CamView software

Figure 3-2: IP CAM Web configuration login page

Figure 3-3: IP CAM Information page

Figure 3-4: Video display page

Figure 3-5: Network settings page for DHCP function

Figure 3-6: Network settings page for fixed IP address

Figure 3-7: WiFi security disabled page

Figure 3-8: WiFi security enabled page

Figure 3-9: WiFi testing page

Figure 3-10: Advanced network settings page

Figure 3-11: Video settings page

Figure 3-12: 3GPP/RTSP enabled page

Figure 3-13: Motion detection enabled page

Figure 3-14: Led Control settings page

Figure 3-15: System date/time settings page

Figure 3-16: Admin settings page

Figure 3-17: Firmware upgrade settings page

Figure 3-18: Firmware upgrade status page

Figure 3-19: System reboot settings page

Figure 3-20: System reboot under-going page

Figure 3-21: Safe mode information page

Figure 3-22: Stick the reset button to set to the factory default

Figure 5-1: IC202/W body

Figure 5-2: Power Adaptor

Figure 5-3: Bracket

Figure 5-4: Antenna

Figure 5-5: Quick installation guide

CMT IP CAM IC202/w

Figure 5-6: Ethernet cable

Figure 5-7: Installation CD

Figure 5-8: ID/Password Card

Table A-1: List of tested Wireless AP/router devices

Table A-2: List of tested Wired NAT/router devices

CMT IP CAM IC202/w

1. Introduction

The IC202/w IP Camera is designed with the “user-friendly” idea deep in mind.

The user can install the IC202/w easily on his/her home network and then access the

IP Camera anywhere in the world through the accompanied video management

software - CamView program without setting some complicated DNS name or

changing the router’s settings. It’s just a plug & play action.

For indoor surveillance and remote monitoring, the IC202/w provides the best

image quality in its class, and excellent performance. The IC202/w IP Camera also

provides the best bandwidth efficiency, it offers 640x480 resolution, 30 fps frame rate,

real MPEG4 image compression ability. The built-in microphone enables remote

users to not only view, but also listen for additional monitoring options.

Of course, with the built-in Web server, the IC202/w IP Cameras can also be

managed from a standard web browser on a Windows computer.

The IC202/w IP Camera provides both wireless IEEE 802.11 b/g and wired

Ethernet network interfaces for flexible installation. It supports the WEP and WPA

(Wi-Fi Protected Access) security modes to provide the best security for wireless

networks. (IC202 model only support wired Ethernet interface)

The IC202/w IP Camera provides motion detection function. Users can easily

setup this function and receive the notification with the snapshot images through

email and/or ftp when some motion events are detected.

The IC202/w IP camera is ideal for securing small businesses, home offices and

residences over a local area network and/or the Internet.

The differences

It’s very easy to see the video of the IC202/w IP Camera, you only need to key in

the ID/Password of the IP CAM any where in the world, you do not need to remember

the IP address or domain name or DDNS name or port number. And you do not need

to modify the settings(like port mapping, fixed IP, DDNS, virtual server) of the

NAT/router devices, it’s just a plug & play usage.

So, the differences are the followings:

♦Public IP address needed ? No

♦Dynamic DNS needed ? No

♦Port mapping in router? No

♦Virtual server in router ? No

♦UPnP support in router ? No

♦What’s needed ? ID and Password

CMT IP CAM IC202/w

2. Hardware description and quick installation/usage

The IP CAM is designed to be very easy to install and use. First, let’s see the

major components of the IP CAM products.

2.1. Major hardware components.

The major components on the front panel of the IP CAM products are the built-in

microphone, lens and LEDs :

1. Microphone – for receiving the audio/voice. Effective distance is about 5 meters.

2. Lens – the focus of the lens is fixed, you do not need to spend time to adjust the

focus, the effective focus range is from 40cm to infinity.

3. Status indication LED (red) – this LED is to indicate the Internet connection status.

When the Internet connection is connected, the LED will be constant red light. If

there is any Internet connection problem, the LED will be blinking red light.

4. Ethernet indication LED (blue) – this LED is to indicate if the Ethernet link is ok

and packet traffic is sending/receiving. When the Ethernet cable is connected, the

LED is constant blue light. When there is packet sending/receiving, the LED is

blinking blue light.

Figure 2-1: Major components in the front panel

The major components on the back panel of the IP CAM products are the bracket

screw jack, power jack, Ethernet jack and reset button:

1. Bracket screw jack – this is the position to screw in the bracket of the IP CAM.

With the bracket, you can put the IP CAM on the desk, on the wall or on the

ceiling.

2. Power jack – this is the place to plug in the power adaptor. The power needed for

this IP CAM is 5V/1.0A, please make sure you are using the correct power

adaptor.

3. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable. When the

CMT IP CAM IC202/w

Ethernet link is ok, the Ethernet indication LED on the front side will be blue light.

4. Reset button – this is the button to reset the IP CAM to default factory settings.

You need to use a small stick like pencil or tooth stick to press the reset button for

more than 3 seconds to enable the reset function. Usually when you forgot the

administrator account, you will probably need to do this reset action to reset to the

default factory settings. Please refer to section 3.15 for more details.

5. Antenna jack(for IC202w) – this is the place to hold the wireless antenna. The

antenna must be plugged to let the 802.11 b/g wireless work.

Figure 2-2: Major components in the back panel

2.2. Quick installation and usage

There are only three things that you need to do to see the video from the IP CAM.

1. Connect the IP CAM to the home/office network.

2. Install the CamView software on the notebook/PC.

3. Key in the ID/password of the IP CAM(from the IP/Password card) on the

CamView, and then you can see the video.

First, Connect the IP CAM to the home/office network

Please connect the IP CAM accessaries to the IP CAM body correctly, including

the antenna, bracket, power adapter and Ethernet cable, as shown in Figure 2-3.And

connect the other end of the Ethernet cable to the home network or office network.

Usually, this Ethernet cable is plugged into a home NAT/router device or an Ethernet

switch if in the office, as shown in Figure 2-4. Since the default settings of the IP CAM

use DHCP function and very often there is a DHCP server on most of the Home/office

network, the IP CAM should be connected to the Internet immediately. The Internet

status LED is constant red light to indicate this good connection status. If the LED is

blinking, please refer to section 3.3~3.5 to try other network settings.

CMT IP CAM IC202/w

Figure 2-3: IP CAM connection diagram.

Figure 2-4: Connect Ethernet cable to a switch/router.

Second, Install the CamView software on the notebook/PC

Please insert the installation CD into the CD-ROM drive in your notebook or

personal computer (must be running Microsoft Windows OS). Execute the program

CamViewInstaller-xxx.exe on the disk. The program will pop-up some windows about

the installation options, please press the “next” button to proceed with the installation.

After the installation is complete, there will be a CamView icon on the desktop of your

computer screen, please execute this icon. The CamView program will run

immediately.

CMT IP CAM IC202/w

Figure 2-5: The installation CD disk

Third, Use CamView program to see the video

Figure 2-5 is the running window of the CamView program. If the computer and

IP CAM is connected to the same network, the IP CAM ID will be displayed in the

“Auto Search” list. You can double click the “Auto Search” to search all the connected

IP CAMs any time. The only thing left right now for seeing the video is to double click

the IP CAM ID item in the “Auto Search” list. For example, if the IP CAM ID is

001-001-029, you can then double click the 001001029 item in the “Auto Search” list

to view the video. A window asking for password input will pop up. Please key-in the

password in your ID/Password card into this field and click “ok”. The video will then be

displayed on the window.

Figure 2-6: The ID/Password card

Notice :

1. You can modify this play-video password by entering into the web configuration

pages. Please refer to section 3.6 for more information.

2. You can also add the IP CAM into the CameraList or GroupList in the CamView

software to have more convenient video display, please refer to the user manual

of the CamView software for more functions.

Seeing the video in a remote location

After the IP CAM is installed and you can see the video from the CamView

software in the local network, it’s very easy to see the video in a remote location.All

you need to do is add a camera item in the “CameraList” folder of the CamView

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CMT Telecamera IP

CMT

CMT IP Cam w Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente