CNPOS CN-EU804 Manuale del proprietario
CNPOS ® PROGRAMMING MANUAL AND USER MANUAL
Safety Instruction
Safety warming
1)
The print head is heating parts, during printing and end printing, do not touch the print headand
surrounding parts.
2)
Do not touch the surface of the print head and connection socket, avoid the electrostatic
damage the print head.
Notice
1)
Printing units should be installed in a flat, stable place;
2)
Keeping enough space around the printing units to be convenient for operation and
maintenance;
3)
Far away from water for all printing units;
4)
Do not use and store printing units in high temperature, damp and polluted places. Avoid
sunlight, strong light and heat direct sources;
5)
Avoid the printing units in the vibration and impact;
6)
Avoid the damp air condensation on the surface of the printing units. If condensation has been
formed, do not open the power of the printing units before the dew disappear;
7)
Keep the printing units power adapter connected to a properly grounded outlet; avoid using the
same socket with large motor or other devices which can lead to the power supply voltage
fluctuation;
8)
If long time will not use the printing units, please disconnect the power of the power adapter;
9)
To avoid water or conductive material into the printing units interior, once occurred, should
immediately shut off the power;
10)
Printing units shall not be print under the conditions of no paper,otherwise will seriously
damage the printing roller and the thermal print head;
11)
In order to guarantee the print quality and the product life,suggest to use same quality
paper
as recommended;
12)
In the case of print effect meets the requirement, suggest users to set lower level
concentration of print as much as possible, to avoid affect the life of the print head;
13)
The user shall not be removed printing units for maintenance.
CNPOS ® PROGRAMMING MANUAL AND USER MANUAL
Content
Brief Introduction .........................................................................................................................................1
Chapter 1 Characteristics and performance ...........................................................................................2
13.1...................................................................................................................................................
P
rint performance............................................................................................................................2
13.2...................................................................................................................................................
P
rint paper........................................................................................................................................2
13.3...................................................................................................................................................
C
haracter set....................................................................................................................................2
13.4...................................................................................................................................................
I
nterface...........................................................................................................................................2
13.5...................................................................................................................................................
P
rinting control command ..............................................................................................................3
13.6...................................................................................................................................................
P
ower supply....................................................................................................................................3
13.7...................................................................................................................................................
D
imension and installation instructions........................................................................................3
13.8...................................................................................................................................................
D
am-board Function .....................................................................................................................10
13.9...................................................................................................................................................
W
ork Environment..........................................................................................................................10
Chapter 2 Operating instructions............................................................................................................11
2.1
Printing Unit components ..........................................................................................................11
2.2
Instructions for paper install......................................................................................................14
2.2.1
Paper Loading..................................................................................................................14
2.2.2
Solution for paper jam of cutter.....................................................................................14
2.2.3
Anti-jamming and Anti-pulling function.........................................................................15
2.3
Interface connection...................................................................................................................15
2.3.1
Serial interface connection.............................................................................................15
2.3.2
USB Interface...................................................................................................................17
2.3.3
Power supply connection...............................................................................................17
2.4
Lights and buttons operation.....................................................................................................17
2.5
Normal working mode................................................................................................................19
2.6
Self-test........................................................................................................................................19
2.7
HEX Printing mode.....................................................................................................................19
2.8
The printer parameters setting..................................................................................................20
2.9 Printer upgrade...............................................................................................................................20
3.0 Installation and use notes..........................................................................................................21
Appendix A: Parameters setting..............................................................................................................22
1
CNPOS ® PROGRAMMING MANUAL AND USER MANUAL
Brief Introduction
CN-EU804/EU805 printer is a new thermal line panel printer, with drop-in paper easy
loading,auto cutter,Black label detection,faster and morereliable.
CN-EU804/EU805 printer easy operation,applications widely, especially to
queue
machine,POS for bank and the business of all kinds of needed docs toprint.
Model Classification
Model
Interface
Have bracket
or not
Anti-jamming and
Anti-pulling
CN-EU804U
USB
/
/
CN-EU804UMF
USB
/
Support
CN- EU805U
USB
have
/
CN- EU805UMF
USB
have
Support
CN-EU804SU
USB+RS232
/
/
CN-EU804SUMF
USB+RS232
/
Support
CN- EU805SU
USB+RS232
have
/
CN- EU805SUMF
USB+RS232
have
Support
Statement
This
product
is
belong
to
class
A.
In
the
living
environment,
this
product
may
cause
radio
Interference.
In
that
case,
the
user
need
to
take
practical
measures
to
interference
2
CNPOS ® PROGRAMMING MANUAL AND USER MANUAL
Chapter 1 Characteristics andperformance
1.1
Print performance
●
Printing method:direct line thermal;
●
Printing paper width:79.5±0.5mm, 82±0.5mm。
●
Resolution:8dot/mm,576dot/line
●
Printing speed:150mm／s（max）
●
MCBF: (1) Printing head life:100km
Operating conditions:
*
Print font 12 ×24 ASCII,printing 50 lines per time,Intermittent reprint.
*
Thermal paper
(2) Auto cutter life:1,000,000cuts.
●
Effective printing width:72mm
1.2
Print paper
●
The mode of thermal paper:TF50KS－E（Japan paper co.ltd）
AF50KS-E(JUJO THERMAL)
●Thermal paper roll: width ---------- 79.5±0.5mm,82±0.5mm
thickness ----------0.06-0.08mm
Paper roll straight-------When the paper roll diameter exceeds 80mm, the
paper core needs to be matched with the paper axis to avoid the paper core from being too large
and the paper roll is shaken, which affects the printingeffect.
1.3
Character set
●
ANK character set:
12×24dot ,1.5（width）×3.00（high）mm
8×
16 dot,1.0（width）×2.00（high）mm
9×
17dot,1.0（width）×2.00（high）mm
●
Chinese:
24×24dot,3.00（width）×3.00（
high）mm
16×16dot,2.00（width）×2.00
（high）mm
1.4
Interface
●
RS232 serial port:
3
CNPOS ® PROGRAMMING MANUAL AND USER MANUAL
PDK-5PIN socket(pin point),support XON/XOFF andDTR/DSR.
Baud rate:1200,2400,4800,9600,19200,38400,57600,115200bpsadjustable.
Data structure:One start bit ＋(7 or 8)data ＋one stopbit.
Verify:No validation or odd and even check isoptional.
●USB port:
Standard USB port.
1.5
Printing control command
●
Characters print command:support the double width and height printing of ANK
characters,self-defined characters and Chinese; characters lines spacing can beadjusted.
●
Bitmap print command:Support printing bitmaps with different density anddownloaded
graphics.
●
GS bar code print command :support
UPC-A,UPC-E,EAN-13,EAN-8,CODE39,ITF25,CODABAR,
CODE93,CODE128,PDF417,QR
Code,DATA Matrix bar codeprint.
1.6
Power supply
●
DC24V±10％，2A，VH3.96-2PIN power socket
1.7
Dimension and installation instructions
●EU804U：95mm×120mm×95mm（L×W×H）
●EU804UMF：118mm×120mm×95mm（L×W×H）
●EU805：252mm×109mm×110mm（L×W×H）
●EU805UMF：275mm×109mm×110mm（L×W×H）
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali CNPOS Stampante
