CO/Tech JS-910FA-UK Manuale utente

Important!

Read the entire instruction manual carefully

and make sure that you fully understand

it before you use the equipment. Keep the

manual for future reference.

Viktig information:

Läs hela bruksanvisningen noggrant och

försäkra dig om att du har förstått den

innan du använder utrustningen. Spara

bruksanvisningen för framtida bruk.

Viktig informasjon:

Les disse anvisningene nøye og forsikre deg om

at du forstår dem, før du tar produktet i bruk.

Ta vare på anvisningene for seinere bruk.

Tärkeää tietoa:

Lue nämä ohjeet huolellisesti ja varmista

että olet ymmärtänyt ne, ennen kuin alat

käyttää laitetta. Säilytä ohjeet myöhempää

tarvetta varten.

Wichtiger Hinweis:

Vor Inbetriebnahme die komplette

Bedienungsanleitung durchlesen und

aufbewahren.

ENGLISHSVENSKANORSKDEUTSCH SUOMI

Ver. 20130830

Original instructions

Bruksanvisning i original

Original bruksanvisning

Alkuperäinen käyttöohje

Original Bedienungsanleitung

Art.no Model

18-3164 JS-910FA-UK

40-7945 JS-910FA

Färgspruta

Malingssprøyte

Maaliruisku

Airbrushpistole

Spray Gun

ENGLISH

Spray Gun

Art.no. 18-3164 Model JS-910FA-UK

40-7945 JS-910FA

Please read theentire instruction manual before using theproduct and save it for

future reference. We reserve theright for any errors in text or images and any

necessary changes made to technical data. If you have any questions regarding

technical problems please contact Customer Services.

1. Safety

Warning! Read all theinstructions. Failure to adhere to thefollowing instructions

may lead to electric shocks, ﬁres and/or serious injury. The term “power tools” in

thewarning text below refers to your handheld mains operated or battery operated tool.

1.1 General safety instructions for your safety and the safety of others

• Keep thework area clean and well lit. Cluttered surfaces and benches invite

accidents.

• Do not use themachine in adangerous environment. The machine should not be

used on moist or wet surfaces or in rain. Make sure that thework area is well lit.

When working in dusty atmospheres, make sure that theair is adequately circulated.

Do not operate power tools in explosive atmospheres, such as in thepresence of

ﬂammable liquids, gases or dust.

• Avoid electric shocks. Avoid body contact with earthed or grounded surfaces such

as pipes, radiators, ranges and refrigerators when using power tools.

• Keep children and bystanders away. Keep children and visitors at asafe distance

from electrical machinery/tools and electric cables in theworkplace.

• Store power tools out of thereach of children. Power tools are dangerous in

thehands of untrained users.

• Do not abuse thelead. Do not carry themachine by its mains lead. Do not yank

themains lead to turn thepower off, pull theplug out instead. Make sure that

themains lead does not come into contact with heat, oil, or sharp edges.

• Secure theworkpiece ﬁrmly. Use clamps or vices if possible so that you can use

both hands to operate thepower tool, it is much safer than holding theworkpiece

in one hand.

• Do not overreach. Make sure that you stand steady and balanced all times.

• Turn thepower off. Pull out theplug and push in theemergency stop button before

servicing thetool and before taking abreak from work.

• Avoid accidental starting. Do not walk around with your ﬁnger on thetrigger of

apower tool if it is plugged in. Make sure that theon/off switch is set to OFF

before plugging in any power tool.

• Using extension leads If you use extension leads outdoors, only use those

designed for outdoor use. Only use extension leads with adequate wire core area

and roll out thewhole lead.

ENGLISH

• Use common sense and be careful. Think carefully before carrying out every

action, so that it is carried out safely. Never operate machines/power tools when

you are tired or under theinﬂuence of medicine.

• Inspect thetool for damage. Check thefollowing before turning thetool on:

- that theguards and other parts are undamaged and working properly.

- that moving parts can rotate freely and are correctly aligned.

- that no moving parts can get caught.

- that there is no fault or defect that could affect theperformance of themachine.

• A safety guard or any other part that is damaged should be repaired by

atradesman or replaced. Damaged power leads and switches must always be

replaced by atradesman. Never operate atool if you cannot stop or start thetool

comfortably.

• Warning! Use only recommended accessories. The use of non-recommended

accessories can cause accidents and personal injury.

• Power tools should only be repaired by aqualiﬁed technician. This tool conforms

to current safety requirements. Repairs to thetool should only be carried out by

atradesman using original spares; otherwise thetool could cause accidents and

personal injury.

1.2 Safety instructions

• The spray gun must not be used in close proximity to sources of ignition such as

open ﬁres, smokers, sparks, ﬁlaments, hot surfaces, etc.

• Be aware of potential hazards caused by thespray coating. Follow theinstructions

on thepackaging of thespray coating, especially those related to personal safety

equipment.

• Use all chemicals in awell-ventilated room suited for thepurpose.

• Warning! Never use aspray coating that you are unfamiliar with and do not know

how dangerous it is.

• If thepower lead is damaged, it must only be replaced by anauthorised service centre.

• Warning! Personal danger. Never point thespray gun at yourself, other persons or

animals.

• Make sure that no solvent fumes are sucked into theturbine when thespray gun is

used indoors.

• Toxic fumes can be produced from working with thespray gun that could be

hazardous to your health.

• ALWAYS use suitable safety goggles, gloves, breathing masks, etc. to prevent

paint, solvents and poisonous fumes from coming into contact with eyes and skin.

• Pay attention to thewind direction when using thespray gun outdoors.

When working indoors, ensure that there is adequate ventilation.

• Do not point thespray gun at theturbine.

• Never let children use thespray gun.

• Do not disassemble theproduct and do not try to repair it yourself.

ENGLISH

1.3 Safety symbol guide

Wear ear protection.

Wear safety glasses or visor and aface mask.

Read theentire instruction manual before use

and save it for future reference.

2. Coatings suitable for use with this spray gun

Water- and solvent-based paints, clear lacquers, wood stains, primers,

2-component paints, impregnating agents, rust inhibitors, etc.

Coatings NOT suitable for use with this spray gun

• This product is not designed for use with emulsion paints, alkali-based or

acid-based paints.

• Not for use with calcimine paints such as whitewash or Falu Red.

3. Product description

• Cotech HLVP Spray Gun (High Volume Low Pressure). A turbine delivers

acontinuous volume of air that atomizes thepaint at low pressure, thus minimizing

therisk of paint runs and shortening thedrying time.

• Variable ﬂuid feed control.

• Produces almost no paint mist, which means that you can paint with minimum

paint loss and masking.

• For lacquers, glazes, stains and wood preservative.

• Delivery: 200 ml/min.

• Comes with viscosity cup and 2.1 m air hose.

ENGLISH

137

1 3 4

129

2 15

4. Features

1. Spray pattern lever

2. Nozzle

3. Retaining ring (for nozzle)

4. Spray gun

5. Trigger

6. Fluid control knob

7. Power switch ON/OFF

8. Air hose

9. Shoulder strap

10. Air ﬁlter

11. Air ﬁlter cap

12. Power lead with plug

13. Spray gun holder

14. Paint container

15. Paint needle

ENGLISH

5. Preparations

5.1 Checking/adjusting the viscosity of the coating

Thoroughly shake thecan of coating material before opening it. Spray paint normally

needs to be diluted (we suggest that you test thepaint before diluting it). Follow

themanufacturer’s recommendations for diluting theproduct. Ask your paint retailer

for advice if you are unsure but remember to mention that you are using aHVLP

spray gun. The thickness of paint is denoted by its viscosity and is measured by letting

acertain amount of paint run through ahole of acertain diameter. The longer it takes

for thepaint to run through thehole, thehigher theviscosity. The shorter thetime,

the lower theviscosity. Viscosity is given in seconds (DIN-seconds).

Warning! Only use spray coating with aﬂash point above 21 ˚C.

Measuring the viscosity

1. Shake thecan containing thespray coating for along time before measuring.

2. Dip theentire viscosity cup into thespray coating so that it ﬁlls completely.

3. Empty theviscosity cup and measure how long it takes for theﬂuid to run

through thehole.

4. Dilute thepaint if it is too thick and measure it again.

Guidelines for the viscosity of spray coatings

Spray coating Viscosity in DIN-seconds

Primer containing solvent 25–40

Varnish containing solvent 15–40

Water-soluble primer 25–40

Water-soluble varnish 20–35

Wood preservative, paint remover, oil Undiluted

Disinfectant, insecticide Undiluted

Vehicle paint/lacquer 20–35

ENGLISH

5.2 Preparing the spray gun for use

1. Attach theshoulder strap (9).

2. Connect theair hose (8) to both theturbine and thespray gun.

3. Unscrew thepaint container (14).

4. Adjust thesuction tube. Twist it forward to spray downwards (A) and backward to

spray upwards (B).

5. Place thecontainer on apiece

of paper or acloth. Pour in

thespray coating ﬂuid and screw

thecontainer onto thespray gun.

6. Stand theassembled spray gun

on aclean and level ﬂoor. Make

sure that there is no dust around

that could be sucked into theﬁlter.

7. Hold thespray gun and start

theturbine using thepower

switch (7). Test spray thegun on

apiece of waste cardboard or

such, and adjust thepaint ﬂow

and nozzle accordingly.

ENGLISH

aB C

5.3 Preparing the object to be sprayed

• The quality of theﬁnish will depend on how clean and smooth thesurface is before it is

sprayed. Remove any rust or old paint with sandpaper if necessary. Clean thesurface

of dust before spraying.

• Cover all surfaces that are not to be sprayed with plastic sheets or newspapers.

Cover all hinges, screws, etc within thespraying area.

6. Settings

N.B. Ensure that thevoltage marked on theproduct matches thepower supply to be used.

• The spray gun can be set to horizontal, vertical or round spray patterns.

• The spray gun has 3 different spray pattern settings:

Undo theretaining ring (3) and twist thenozzle to change thesetting and then tighten

theretaining ring again.

A) Vertical pattern for spraying from side to side.

B) Horizontal pattern for spraying up and down.

C) Round pattern for spraying into corners or hard-to-reach places.

Warning! Do not pull thetrigger whilst adjusting thenozzle. This is dangerous and

might result in personal injury.

ENGLISH

10a 10b

The nozzle also has aspray pattern

width adjustment lever: Pull thelever

(1) back for around spray

pattern (C) or push thelever forward

for anoval spray pattern (A) or (B).

Fluid ﬂow control

Adjust thepaint ﬂow using theﬂuid

control knob (6) on theback of

thespray gun.

Turn theknob anticlockwise to

reduce thepaint ﬂow and clock-

wise to increase thepaint ﬂow.

7. Spraying technique

• Always practice on apiece of scrap cardboard or similar before starting your project.

• Hold thespray gun 5–15 cm away from thesurface of theobject. Test to ﬁnd

asuitable distance before starting.

• Always begin your spray stroke 15–20 cm before thework and ﬁnish it 15–20 cm

after thework. Move your arm in awide sweeping motion (Fig. 10a).

• It is important that thespray gun is kept parallel to thesurface (Fig. 10a), if not you

will end up with more paint in themiddle and less at thesides which leads to paint

runs and poor ﬁnishes (Fig. 10b).

• Regularly check during spraying that there is no paint build up on thenozzle (2),

as this prevents thespray gun from working properly. Clean if necessary.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali CO/Tech Spruzzatore di vernice

CO/Tech

CO/Tech JS-910FA-UK Manuale utente

CO/Tech

CO/Tech 40-9132 Manuale utente

Manuali Spruzzatore di vernice popolari di altre marche

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Manuale utente

Graco

Graco 246737 Manuale per l'uso e la cura

Binks

Binks SV100 Manuale utente

Fimco

Fimco LG-4-3-1 Manuale utente

AG SPRAY

AG SPRAY FS-ATV-25BL Manuale utente

Nordson

Nordson MicroMax 2 Manuale utente

Bonide

Bonide 051 Manuale operativo

zogics

zogics Z-DAS Manuale utente

KISANKRAFT

KISANKRAFT KK-KBS-165 Manuale utente

Matrix

Matrix SG 650 Manuale utente

Anest Iwata

Anest Iwata SGA-3 Guida rapida

paasche

paasche VV Scheda tecnica

Carlisle

Carlisle DeVilbiss JGA-510 Manuale utente

Gardena

Gardena 11120 Manuale utente

Conrad

Conrad Hobby Airbrush K3 Manuale utente

wiwa

wiwa 14025 R/F Manuale utente

Graco

Graco EM 390 Manuale operativo

DeVilbiss

DeVilbiss LUNA2i Manuale utente