Coby CHBT-80FD Manuale utente
COBY
WIRELESS HEADPHONES
CHBT- 80FD
Manual
H
80F
0
Read me
Model#: CHBT - 80FD (FD# 2101271)
Input: DC5V/500mA
Output: 32Ω
Date Code: 2019-05
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10) Only use attachments/accessories specified by the manufacturer.
11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
FCC NOTICE TO USERS:
FCC ID: 2AMSOCHBT80
Caution: Changes or modifications not expressly approved by the Party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection Against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications, however there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for Help.
The device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. The
Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Summit Electronics LLC is under license. Other trademarks and trade
names are those of their respective owners.
INTRODUCTION
Thank you for purchasing the CHBT-80FD! This
instruction manual is intended to help you better
understand and use your Bluetooth® Headphones.
Terms covered in this manual will become more
familiar to you as you use your device.
PRODUCT OVERVIEW
1
1
2
3
4
5
6
7
1. TF Card Slot
2. Micro USB Port
3. AUX-In Port
4. "Next/Volume Up"
Button
5. "Call/Play/Pause"
Button
6. "Previous/Volume
Down" Button
7. "Power/Mode"
Button
2
OPERATION
Charging Your Headphones
Connect one end of the provided Micro USB cable to the
Headphones and the other to a power source. While the
Headphones are charging the LED indicator light will turn
red. When it’s fully charged the LED indicator will turn blue.
Powering On & Off
On: Press hold and release the “Power/Mode” button to turn
the headphones on. The LED indicator will begin flashing
blue and red indicating that the headphones have
successfully powered on.
Off: Press hold and release the “Power/Mode” button. The
user will hear a voice prompt say “Power Off” and then the
headphones will turn off.
Note: The Headphones will power off when not in use.
Connecting via Bluetooth®
After powering on the Headphones and seeing the LED
indicator begin alternating between blue and red. The user
LED INDICATORS
Powering Off
Powered On /
Bluetooth® Mode
Charging Finished Blue
Flashes Blue and Red
LED Indicator Light Turns Off
Connected Status
LED Flashes Blue
LED Indicator Light Turns Blue
TF Mode
Charging In Progress Red
3
Music Controls
•Play/Pause: When the Bluetooth® headset connects
to a mobile phone, press the "Call/Play/Pause" button
to play music from the phone. Press the "Call/Play/
Pause" button again to pause the music that is playing.
•Next song: Press the "Next/Volume Up" button to play
the next song.
•Answer Call:When you receive an incoming call the
Headphones will provide a voice prompt reciting the
phone number of the incoming call. To answer, press
the "Call/Play/Pause" button.
•End Call: To end an ongoing call press the "Call/Play/
Pause" button.
•Reject Call: To reject an incoming call press and hold
the "Call/Play/Pause" button.
•Redial The Last Outgoing Or Incoming Call: To
redial a number Double click the "Call/Play/Pause"
button.
Note: When the phone receives or sends a call any
music that is playing will be pausedautomatically. The
music will play again after the call ends.
will hear a voice prompt say “Bluetooth® Mode”. This
indicates that the device has successfully entered pairing
mode. Open your Phones Bluetooth® settings (make sure
that Bluetooth® functionality is turned on) and look for
“CHBT- 80FD” on the list of nearby devices. Tap the name
and the user will hear a voice prompt say "Connected". This
indicates that the devices have been successfully paired.
The headphones will automatically connect with your
smart-phone the next time they’re both on, in range, and in
pairing mode. If you are asked for a password enter "0000".
Phone Commands
4
Press the "Power/Mode" button to switch between
Bluetooth®, TF Card Mode, as needed.
•Once the TF card is inserted the LED indicator will flash
red and the user will hear a voice prompt say
"Play by TF Card." Note: TF Mode is only accessible
when an SD card has been inserted into the TF card slot.
After the voice prompt is heard music will automatically
begin playing.
PACKAGE CONTENTS
•CHBT-80FD Headphones
•Micro USB Cable
•Manual
•Next song: Press the "Next/Volume Up" button to
play the next song.
•Previous song: Press the "Previous/Volume
Down"button to play the previous song.
•Increase volume: Press and hold the "Next/Volume
Up” button until you reach the desired volume.
•Decrease Volume: Press and hold the “Previous/
Volume Down” button until you reach the desired
volume.
TF CARD MODE
5
SPECIFICATIONS
Bluetooth® Version 5.0
Bluetooth® Range 33ft
Playtime 7 Hours
Charge Time 2 Hours
Battery Lithium Ion
Power Input 5V
Music Input Bluetooth®, AUX, TFCard
Item Dimensions 19.5 x 17 x 2.3cm
Weight 180.6 g
6
SUMMIT ELECTRONICS LLC ONE YEAR LIMITED WARRANTY
SUMMIT ELECTRONICS LLC LIMITED WARRANTY (“Warranty”) ― For Product
Categories Listed in Chart Below (as applicable, “Product”) Before returning
your Product for service under this Warranty, please (i) read the instruction
manual carefully. If you are still having trouble with your Product, please contact
Technical Support at support@summitcegroup.com
Warning
: Some Products may contain components that are small enough to be
swallowed. Please keep out of reach of children.
Subject to the terms and conditions herein, SUMMIT ELECTRONICS LLC
(hereinafter called “SUMMIT ELECTRONICS LLC”) warrants to the original purchaser
of the Product (“Customer”) that for the applicable Warranty Period listed below,
the Product will be free from defects in material or workmanship under normal,
non-commercial use (“Defects”). Warranty Period encompasses, as listed
below, separate “Coverage Periods” for Parts and Labor, each Coverage Period
for one year, to begin from the original date of Customer purchase. If Customer
returns a defective Product (or any component thereof) during the applicable
Warranty Period, SUMMIT ELECTRONICS LLC will, at its option, during the
specified Coverage Periods for Parts and Labor (as applicable) either: (i) repair
Product (or, as applicable, any component thereof) or (ii) replace the Product
(or, as applicable, any component thereof) with a new or refurbished Product
(or, as applicable, any component thereof), in either case free of charge to
Customer for Parts and/or Labor (as applicable) during the specified Coverage
Period only, and excluding applicable shipping charges (noted below), for which
the Customer is responsible. The foregoing states the Customer’s exclusive
remedy and SUMMIT ELECTRONICS LLC’s sole liability for breach of the limited
warranty contained herein.
This Warranty specifically excludes any Product (or, as applicable, any
component thereof) that has been subject to or Defects resulting from: (a) any
neglect or misuse by a Customer, an accident, improper application, violation
of operating instructions for the Product, any other Customer-induced damage,
or the alteration or removal of any Product serial number: (b) any modification
or repair to Product (or, as applicable, any component thereof) by any party
other than SUMMIT ELECTRONICS LLC or a party authorized in writing by SUMMIT
ELECTRONICS LLC; (c) any damage to Product (or, as applicable, any component
thereof) due to power surges, incorrect electrical voltage, misconnection to any
device, or malfunction of any device used with the Product (or, as applicable,
any component thereof); (d) cosmetic damage to the Product (or, as applicable,
any component thereof) caused by normal wear and tear; (e) shipping damage
that occurs while the Product is in transit; (f) damage caused by heat sources,
7
sunlight, electromagnetic conditions, or other climatic conditions; or (g) any acts
of God. Product is sold to Customer for personal, non-commercial use only.
Product is not warranted for Customer’s commercial or rental use.
In addition, Product is not warranted against failure, and should not be used by
Customer for any application where (i) there is a risk that any data stored on
Product will be breached or otherwise compromised, or (ii) the data stored on
Product is relied upon for medical or lifesaving applications.
SUMMIT ELECTRONICS LLC disclaims any Warranty for any of the foregoing uses
to the fullest extent permitted by law. Customer assumes any and all risks
associated with such uses of Product, and agrees to indemnify SUMMIT ELECTR-
ONICS LLC for any damages claimed against SUMMIT ELECTRONICS LLC for such
uses. EXCEPT FOR EXPRESS WARRANTIES STATED ABOVE AND TO THE
MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS ARE PROVIDED
“AS IS”, AND SUMMIT ELECTRONICS LLC DISCLAIMS ALL OTHERWARRANTIES,
INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY (I) OF
MERCHANTABILITY, (II) OF FITNESS FOR A PARTICULAR PURPOSE,
OR (III) OF NON-INFRINGEMENT OF THIRD PARTY RIGHTS. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
WILL SUMMIT ELECTRONICS LLC BE LIABLE TO CUSTOMER OR ANY THIRD
PARTY FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL,
EXEMPLARY OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION,
ANY LOST PROFITS OR REVENUES, LOSS OR INACCURACY OF ANY
DATA OR COST OF SUBSTITUTE GOODS, REGARDLESS OF THE THEORY
OF LIABILITY (INCLUDING NEGLIGENCE) AND EVEN IF SUMMIT ELECTRONICS
LLC HAS BEEN ADV ISED OF THE POSSIBILITY OF SUCH DAMAGES,
SUMMIT ELECTRONICS LLC’S AGGREGATE LIABILITY TO CUSTOMER FOR
ACTUAL DIRECT DAMAGES FOR ANY CAUSE WHATSOEVER SHALL
BE LIMITED TO THE CUMULATIVE PRODUCT FEES PAID BY THAT
CUSTOMER FOR THE PRODUCT CAUSING THE DAMAGES, IF ANY. This
Warranty gives Customer specifics rights, and Customer may also have other
rights that vary from jurisdiction to jurisdiction. To obtain Warranty service,
Customer must email SUMMIT ELECTRONICS LLC Technical Support prior to making
a Product return. Customer must include with Product return the following items
(failure to enclose any of these items may result in a delay in the processing
of your Warranty claim): (i) a dated sales receipt that indicates the place of
purchase, model number of Product, and amount paid; (ii) a detailed description
of Customer’s problem with Product; (iii) Customer’s full name, phone number,
and return address, and; (iv) a money order made out to SUMMIT ELECTRONICS LLC
Electronics Corporation to cover return shipping charges to US destinations
only, for the applicable dollar amount shown for the Product in the table above.
SUMMIT ELECTRONICS LLC will not make return shipments to a P.O. Box. For
shipping to international addresses, actual freight will be charged to Customer.
Return your Product freight-prepaid in its original packaging, or packaging
that affords an equal measure of protection. Please allow 4 to 6 weeks for the
8
processing of your claim (6 to 8 weeks from November to February).
PRODUCT CATEGORY
SHIPPING*
(USD)
Adapters, Converters, Chargers, Headphones,
Microphones, Cellular Accessories
$7.99
Alarm Clocks, Portable CD Players, Radios, Corded
Telephones, MP3 Players, Digital Photo Frames
(screen size less than 5”)
$7.99
Portable Stereo Systems, Speaker Systems,
Cordless Telephones, Home DVD Players
$14.99
Home Theater DVD Systems, Portable DVD
Players, Portable Media Players, Digital Photo
Frames (screen sizes 5” to 11”)
$21.99
You must email SUMMIT ELECTRONICS LLC Technical Support prior to making a
return. Please ask if you are unsure of which category your product falls under.
*US destinations only.
Contact Us at
support@summitcegroup.com
For Return Information
Indice
Lingue:
Altri manuali Coby Cuffie senza fili
