Code Alarm Ca 1053 Manuale utente

PROFESSIONAL

SERIES

ca 1053

Owner’s Guide

IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is

applicable to most vehicles. However, due to the conguration of some vehicles, some functions AND/OR

SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.

Vehicle Security and

Keyless Entry System

2ca1053 rev A.

Table of Contents

Using Your Remote Control.................................................................... 3

Arming the Security System .............................................................. 3

Passive Arming Bypass..................................................................... 3

Bypassing the Shock Sensor ............................................................ 3

Hidden Alarm Function ...................................................................... 3

Disarming the Security System ......................................................... 3

Valet Mode ........................................................................................ 4

Manually Overriding the Security System ......................................... 4

Eliminating Arm/Disarm Notication Chirps....................................... 4

Activating Trunk Release (optional)................................................... 4

Using the Car Finder Feature............................................................ 4

Using the Personal Protection Alarm................................................. 5

Car Jack Mode .................................................................................. 5

LED and Siren/Horn Indications.............................................................6

Transmitter Button Functions ................................................................ 7

Replacing Remote Control Batteries..................................................... 7

Warranty Information .............................................................................. 8

Arming the Security System

To arm the system, exit the vehicle, close all doors, then press the button. The

parking lights will ash 2 times, indicating the system is armed, has locked the doors

(if equipped and connected) and activated the starter disable feature. The LED status

indicator will blink steadily, once per second.

NOTE: The system is equipped with a feature called Silent Choice. If enabled, the

system requires a second press of the button to activate an audible arming

response from the vehicle.

Passive Arming Bypass

If passive arming is enabled on your system, while the system is disarmed, press

2 times within 5 seconds, the system will respond with 1 chirp and the LED will turn

on. The security system will remain in this temporally bypassed state for as long as

you wish. To exit passive bypass, press the or button and the system will return

to normal status.

Bypassing The Shock Sensor

To arm the system and ignore the shock sensor press button, then within 5

seconds press + , the system will respond with 1 long chirp.

NOTE: The system will only change the shock sensor setting for one arm cycle and

will be defaulted back to normal operation the next time the system is armed.

Hidden Alarm Function

Press the button rst, within 3 seconds press the button to activate the hidden

alarm function. The security system will arm with “Hidden Alarm Function” in which the

siren / horn will be silenced if the system is triggered.

Disarming the Security System

To disarm the system press the button. The parking lights will ash 1 time,

indicating the system is disarmed and has unlocked the doors (if equipped and

connected).

NOTE: The system is equipped with a feature called Silent Choice. If enabled, the

system requires a second press of the button to activate an audible disarming

response from the vehicle.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more

than 2 seconds.

Using Your Remote Control

4ca1053 rev A.

Valet Mode

When valet mode is activated the status LED will light solid, and all security

functions will be disabled. To enter or exit valet mode simply follow the 4 steps

outlined below:

1. Turn the vehicle’s ignition ON.

2. Push and hold the programming/valet button.

3. The LED will turn on solid when valet mode is active

4. Release the programming/valet button.

Manually Overriding the Security System

Your system can be disarmed without the use of the transmitter. This is necessary,

since you will need the ability to operate your vehicle if the transmitter is lost or its

battery fails. To by-pass the alarm system;

1. Open the vehicle door. The alarm will sound.

2. Turn the ignition key to the ON position.

3. Within 10 seconds, press and release the valet push button switch.

The alarm system will stop sounding and enter the (by-passed) mode. You can now

start and operate the vehicle normally.

Eliminating Arm / Disarm Notication Chirps

System ARM/DISARM chirps can be toggled ON or OFF without entering the

programming feature banks.

1. Turn the ignition ON then OFF.

2. Press and release the valet/programming button 3 times. The system

will respond with 1 chirp for ON or 2 chirps for OFF.

Activating the Trunk Release Feature (Optional)

If this feature is enabled on your system, pressing and holding the button for 3

seconds will open the vehicle’s trunk or hatch.

Using the Progressive Car Finder Feature

Press the button to locate your vehicle. The system will sound 5 times at low

volume.

Using the Personal Protection Alarm (Panic)

Press and hold the button for 3 seconds to activate the personal protection alarm.

During panic mode, the normal function of the transmitter buttons will be suspended.

The transmitter’s and buttons can be used to lock and unlock the door (if the

option is installed). To stop the alarm, press and hold the button on the transmitter

again for 3 seconds. The system will automatically stop after 30 seconds.

Car Jack Mode

This feature must be turned on in system programming, please consult your installing

dealer.

Triggering Car Jack mode: While the ignition is ON and press and hold + for 2

seconds, the parking lights will ash 1 time and the system will act as follows;

1. 50 seconds after being triggered the siren will chirp for 15 seconds,

during this 15 seconds you will be alerted to push the valet button to

turn off Car Jack mode. If Car Jack mode is not turned off at this time it

will advance to the next step.

2. Following the 15 second chirps (total time now 65 seconds) the siren

will go into full sound and the parking lights will start ashing.

3. 90 seconds after trigger in, addition to the siren and parking lights, the

system will activate the starter kill. THE SYSTEM WILL REMAIN IN THIS

STATE UNTIL THE BATTERY IS DEPLETED.

OVERRIDE THE SYSTEM TO TURN OFF CAR JACK MODE: Turn the ignition OFF

then On and press the valet button within 10 seconds.

6ca1053 rev A.

LED and Siren/Horn Indications

LED Display Indications

LED Function

OFF DISARMED

SLOW FLASH ARMED

FAST FLASH PASSIVE ARMING

ON (SOLID) VALET MODE

2 FLASH... PAUSE ZONE 2 TRIGGER, HOOD/TRUNK

3 FLASH... PAUSE ZONE 3 TRIGGER, DOOR

4 FLASH... PAUSE ZONE 4 TRIGGER, SHOCK

5 FLASH... PAUSE ZONE 5 TRIGGER, IGNITION

Siren/Horn Indications

Chirps Function

1 DISARM

2 ARM

3 DOOR AJAR UPON ARMING

4 DISARM / TRIGGERED

5 CAR LOCATOR

Parking Light Flash Indications

Flashes Function

1 DISARM

2 ARM

3 DISARM / TRIGGERED

5 CAR LOCATOR

Transmitter Button Functions

Replacing Remote Control Batteries

1-Way 4 Button Remote Control (part # CATX4)

The batteries (model CR2016) inside each remote control should last approximately 1

year under normal use. When the batteries become weak you will notice the remote

control range (the distance from the vehicle the remote control will work) deteriorate

and the small LED on the remote control will dim. To replace the remote control

batteries:

1. Unsnap and disassemble the halves of the remote control.

2. Remove the old batteries, observing the +/- symbols on the batteries and

replace with new CR2016 batteries.

3. Reassemble the halves of the remote control.

4. Test operation of the remote control.

Lock Unlock

Car Find /

Panic

Trunk Operation Method

Lock XPress and Release

Unlock XPress and Release

Trunk XPush and Hold (3 Sec)

Car FinderX

Press and Release

PanicX

Push and Hold (3 Sec)

Shock Bypass XX

Press and Release Lock then Press

Lock + Car Find (within 5 Sec)

Passi ve Arming

Bypass

XPress 2 Times (within 5 Sec)

Arm with

Hidden Alarm

Function

Press Trunk then Lock (within 5

Sec)

8ca1053 rev A.

LIMITED LIFETIME WARRANTY

Applies to Code Alarm Series Control Modules, Sirens, Sensors, and Relays.

Voxx Electronics Corporation (the Company) warrants to the original purchaser of this

product that should this product or any part thereof, (other than transmitters) under nor-

mal use and conditions, be proven defective in material or workmanship during the life-

time of the vehicle, in which it was originally installed from the date of original purchase

such defect(s) will be repaired or replaced with new or reconditioned product, (at the

Company’s option) without charge for parts or repair labor. A transmitter is warranted for

12 months from the date of original purchase.

To obtain repair or replacement within the terms of this Warranty, the product is to

be delivered with proof of warranty coverage (e.g. dated bill of sale), specication of

defect(s), transportation prepaid, to an approved warranty station. This Warranty is not

transferable.

This Warranty does not cover damage to the vehicle’s electrical system or costs

incurred for removal or reinstallation of the product. This Warranty does not cover bat-

teries, broken LCD or OLED display screens, nor apply to any product or part thereof

which, in the opinion of the Company, has suffered or been damaged through alteration,

improper installation, mishandling, misuse, abuse, neglect, accident, or by removal or

defacement of the factory serial number/bar code label(s).

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WAR-

RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL

BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. IN NO CASE

SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL

DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or rep-

resentative is authorized to assume for the Company any liability other than expressed

herein in connection with the sale of this product.

The company does not warrant that this product cannot be compromised or circum-

vented. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY

IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO

EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID

BY PURCHASER FOR THE PRODUCT WITHOUT COST OF INSTALLATION.

Some states do not allow limitations on how long an implied warranty lasts or the

exclusion or limitation of incidental or consequential damage so the above limitations or

exclusions may not apply to you. This Warranty gives you specic legal rights and you

may also have other rights which vary from state to state.

Voxx Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 / 1-800-645-4994

128-9445

10 ca1053 rev A.

Audiovox Electronics Corporation.

Customer Service 1-800-421-3209

WWW.CODE-ALARM.COM

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules and with RSS-210 of

Industry Canada. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including any interference that

may cause undesired operation.

Warning!

Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Indice

Altri manuali Code Alarm Allarme auto

Code Alarm

Code Alarm CA- 550 Manuale utente

Code Alarm

Code Alarm SRT 5500 Manuale utente

Code Alarm

Code Alarm CSI-300 Manuale utente

Code Alarm

Code Alarm CATX630 Istruzioni operative

Code Alarm

Code Alarm PROFESSIONAL SERIES Manuale utente

Code Alarm

Code Alarm CA 671 Manuale utente

Code Alarm

Code Alarm CA 6551 SST Manuale utente

Code Alarm

Code Alarm CA-135 Manuale utente

Code Alarm

Code Alarm CATX510 Istruzioni operative

Code Alarm

Code Alarm CA-500 Manuale utente

Code Alarm

Code Alarm PROFESSIONAL SERIES CA 1551 Manuale utente

Code Alarm

Code Alarm ca 1151 Manuale utente

Code Alarm

Code Alarm CATX110 Istruzioni operative

Code Alarm

Code Alarm CA-670 Manuale utente

Code Alarm

Code Alarm ca 1552 Professional Series Manuale utente

Code Alarm

Code Alarm ca 1051 Manuale utente

Code Alarm

Code Alarm Professional caSECRS Manuale utente

Code Alarm

Code Alarm CA 1150 Manuale utente

Code Alarm

Code Alarm CA-640 Manuale utente

Code Alarm

Code Alarm CA-230 Manuale utente

Code Alarm

Code Alarm CA100 Manuale utente

Code Alarm

Code Alarm ca 2051 Manuale utente

Code Alarm

Code Alarm Professional ca6153 Manuale utente

Code Alarm

Code Alarm 2000 Manuale utente

Manuali Allarme auto popolari di altre marche

Clifford

Clifford 3606X Manuale utente

Ultra Start

Ultra Start 2500M SERIES Manuale utente

Ultra Start

Ultra Start 650 Series Manuale utente

Audiovox

Audiovox Prestige Platinum+ APS-511C Manuale utente

Sparkrite

Sparkrite SRA8 Manuale utente

Viper

Viper 4708V Manuale utente

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Manuale

Falcon

Falcon Predator XL3 Guida utente

Audiovox

Audiovox Auto Security XR91 Istruzioni operative

Clifford

Clifford Sabre II Manuale utente

CrimeStopper

CrimeStopper CS-8717 Guida rapida

Ultra Start

Ultra Start 450 SERIES Manuale utente

Scytek electronic

Scytek electronic Vectra X3 Manuale utente

Excalibur

Excalibur AL-1860-EDPB Manuale utente

Clifford

Clifford CYBER 2 Manuale utente

Gemini

Gemini 7057 Manuale utente

FlashLogic

FlashLogic FLRSBA PRESTIGE Manuale utente

Magicar

Magicar FAI-440 Manuale utente