Cole Parmer Stuart SC6PLUS Manuale utente

cptechsupport@coleparmer.com | Tel: +44 (0)1785 810433 | 05/2017

EQUIPMENT

EQUIPMENTEQUIPMENT

EQUIPMENT

Using the SC6PLUS printer and PC software

•

Introduction

The Stuart S 6PLUS colony counter consists of a touch-

sensitive illuminated receiver plate and keypad with a digital

LED display. Pressure applied to the receiver plate by marking

a colony registers a count indicated by an audible bleep and

advance on the digital display.

To give a more permanent record of the colony counts, the

counting results together with plate averages and statistics

can be printed on the accessory printer or alternatively sent

to a computer via USB and viewed using the S 6PLUS

software.

We describe here how to use the S 6PLUS colony counter with

the accessory printer and P software.

•

Using the printer

If using the accessory printer, connect the printer to the socket on the rear of the unit and

connect the printer to the mains supply. The power indicator should illuminate.

To print individual counts:

•ount the colonies present on the plate in the usual way then press the save key to

confirm. The unit will beep and the display will show three dashes ---.

•Press the print key. The printer will print the count of the plate.

•To clear the counts, press the save key then press and hold the correct/reset key. The

unit will beep and reset to 0.

To print the results of several counts:

•ount the colonies on the first plate then press the save

key twice.

•Repeat for the remaining plates but after the last count

press the save key only once. The individual counts are

saved as in the averaging function and the display ends

with ---.

•Press the print key. The printer will print the counts of all

the plates together with the population and sample

standard deviations, % Vs, maximum and minimum

counts as shown in the example opposite.

•To clear the memory, press and hold the correct/reset

key. The unit beeps twice and resets the count to 0. The memory is cleared of the

saved counts.

Using the SC6PLUS printer and PC software

cptechsupport@coleparmer.com | Tel: +44 (0)1785 810433 | 05/2017

•

Using the PC software

If intending to use the S 6PLUS software, follow the instructions for installing the software

given at the following link:

http://www.stuart-equipment.com/adminimages/S 6PLUS_P software_Setup(1).pdf.

After installing the software, connect the unit to a P using the supplied USB cable. The

S 6PLUS software screen will be displayed on the computer. The icons perform the

following functions:

Save the data as a text (txt) file for import into a

spreadsheet.

lear the current data.

Go to the Stuart website

To print individual counts to the PC:

•ount the colonies on the plates then press the save key to confirm. The unit will beep

and the display will show three dashes ---.

•Press the print key. The software will display the counts for Dish 1.

•To clear the counts on the unit, press and hold the correct/reset key. The unit beeps

twice and resets the count to 0.

•To clear the counts in the S 6PLUS software, click on the red cross icon to clear the

display.

To print the results of several counts to the PC:

•ount the colonies on the first plate then press the

save key twice.

•Repeat for the remaining plates but after the last

count press the save key only once. The individual

counts are saved as in the averaging function and

the display ends with ---.

•Press the print key. The software will display the

counts of all the plates.

•In the S 6PLUS software, click the file save icon and save the data. The data is saved

as a .txt file in the selected location.

Indice

Altri manuali Cole Parmer Attrezzature da laboratorio

Cole Parmer

Cole Parmer ST-100 Series Manuale utente

Cole Parmer

Cole Parmer HP-400 Series Manuale utente

Cole Parmer

Cole Parmer RS-200 Series Manuale utente

Cole Parmer

Cole Parmer ST-200 Series Manuale utente

Cole Parmer

Cole Parmer EW-04725-60 Manuale utente

Cole Parmer

Cole Parmer Stuart W4000 Manuale utente

Cole Parmer

Cole Parmer Techne BLOCKICE Manuale utente

Cole Parmer

Cole Parmer CC-200 Series Manuale utente

Cole Parmer

Cole Parmer Julabo 200F Manuale utente

Cole Parmer

Cole Parmer Colony Counter 14312-00 Manuale utente

Cole Parmer

Cole Parmer WS-200 Series Manuale utente

Cole Parmer

Cole Parmer RHC-400 Istruzioni per il montaggio

Cole Parmer

Cole Parmer GenoLyte HG-200 Manuale utente

Cole Parmer

Cole Parmer Stable Temp 282A Manuale utente

Cole Parmer

Cole Parmer V-100 Series Manuale utente

Cole Parmer

Cole Parmer SH-200 Series Manuale utente

Cole Parmer

Cole Parmer BM-600 Manuale utente

Cole Parmer

Cole Parmer WD-200 Series Manuale utente

Cole Parmer

Cole Parmer Stuart SS20 Manuale utente

Cole Parmer

Cole Parmer RS-250 Series Manuale utente

Cole Parmer

Cole Parmer Stuart SP152B Manuale utente

Cole Parmer

Cole Parmer GenoLyte HG-250 Manuale utente

Cole Parmer

Cole Parmer HO-200 Series Manuale utente

Cole Parmer

Cole Parmer Stuart RE400 Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente