Comat SMS Relay
1. SMS Relay Operating Instructions
1.1 Short description of the CMS Comat Message System SMS Relay
The Comat CMS-10 SMS relay is a remote control and messaging system Six digital inputs
and four relay outputs with alternating contacts are monitored by means of a SMS (Short
Message System) via a mobile telephone network* (SIM card determines the provider) The
device’s own phone book saves up to 50 mobile phone numbers of the receivers Each
status change at the input sends a pre-defined message by SMS to the selected receivers
The receivers are processed cyclically, according to the order chosen The outputs can be
switched on and off by means of a pre-defined message by SMS In order to obtain an
overview of the state of the installation, the input and output status can also be queried by
SMS The relay outputs have a „time function“ The outputs are only switched on during the
preset time Unauthorised access can be controlled by activation of a password The SMS
relay sends out a message at regular intervals The same thing happens if there is a power
loss, whereby the SMS relay sends out a last message If the power is restored, the CMS 10
sends back a further message All these options can of course be switched on and off if
required The programming of the SMS Relay is carried out with the „FAST SMS Set“ tm
programming software that is provided In this way the settings can be configured
conveniently and easily
*GSM net ork: 850MHz, 900MHz, 1800MHz, 1900MHz (quad-band GSM module inside)
1.2 Short instructions
1 Switch off the SMS Relay
2 Place the SIM card in the card holder
3 Connect the RS232 interface of your PC or Notebook with the programming
interface of the SMS Relay Use the programming cable
4 Now switch on the SMS Relay
5 As soon as the SMS Relay is ready (after about 100 sec), start the programming
software FAST SMS Set
(Status-LED and GSM-LED are blinking regularly)
6 Choose your prepared file or create a new file with your configuration Please set
the correct PIN code
7 Select a free COM port (Menu Configuration – Select port)
8 Download the file to the SMS Relay ( download)
9 Wait until the SMS Relay is ready again (after about 100 sec)
10 Set the time and the date (Menu Configuration – Set time/date)
Operating instructions SMS Relay ba_smsrelay_0706e doc
