
Compact Winch
Model: CWS-160
PN: 420532 220V 420937 230V
420377 220V 421165 230V
Introduction
Feature
Lifting capacity:160 kg wire rope top layer
Lifting height: 30 m
Lifting speed: 14 – 22 m/min
Brake: Electromagnetic and mechanical ratchet
Limit protection: Lifting and lowering limiters
Control: Pendant switch powers the winch
Unpacking
.Winch assembly 1pc
.Wire rope 4.8 mm x 31 m 1pc
.Wire rope 4 mm x 41 m for PN:420377 1pc
.Wire rope 3.2 mm x 45 m for PN:421165 1pc
.Weight hook CHW-0033 1pc
.Power lead 1.5 mm2
x 3C x 5 m and plug 1pc
.Pendant switch CPB-313 w/cord 1.25 mm2
x 6C x 10m 1pc
Read this manual carefully
You should carefully read and understand this manual before operating it.
Careless winch operation may result in personal injury hazards or property
damage.
Information requesting or parts ordering
Please specify the followings information:
.Winch PN
.Serial number
.Part description
.Replacement part number
.Quantity for each part
Installation
Before using the winch, make sure all electrical components have no
corrosion or damaged; the environment should be clear and dry.
Wire rope replacement
.Put a new wire rope through the hole of the round plate of swivel hook.
.Insert a sleeve pin through the thimble of wire rope.
.Insert a pin through the sleeve pin and bent it by a pliers.
.Let a new wire rope w/clamp through the limit lever and insert it into the
hole of the drum.
.Put a P.T. screw into the hole of the drum and tighten it by a hexagon
wrench.
.Press the ↑button to rotate the drum in the lifting direction.
.An uneven winding of wire rope may cause the load to be swing, thus
damaging the rope and reducing its life.
Wiring Diagram