Comm-Tec UP-41TS Manuale utente
UP-41TS
6x1 4K Presentation Switcher with HDBaseT
All Rights Reserved
User Manual
Compact Scaler Switcher
Comm-Tec S.r.l. 2 www.comm-tec.it
Table of Contents
1. Product Introduction .........................................................................................................4
1.1. Features .................................................................................................................4
1.2. Package List...........................................................................................................4
2. Specification .....................................................................................................................5
3. Panel Description .............................................................................................................7
3.1. Switcher Front Panel ..............................................................................................7
3.2. Switcher Rear Panel...............................................................................................8
3.3. System Connection ................................................................................................9
4. Front Panel Control ........................................................................................................10
4.1. Multi-view Mode Selection....................................................................................10
4.2. Full Screen Setting...............................................................................................10
4.3. Swap Window Setting ..........................................................................................10
4.4. Window Size Setting ............................................................................................11
4.5. Video Signal Switching.........................................................................................11
4.6. Switching Status Inquiry .......................................................................................12
4.7. Audio Control........................................................................................................12
5. IR Remote Control..........................................................................................................13
6. GUI Control ....................................................................................................................14
6.1. Control Tab...........................................................................................................15
6.1.1. Video Control .............................................................................................15
6.1.2. Display Control...........................................................................................15
6.1.3. Audio Control..............................................................................................16
6.2. Multiview Tab........................................................................................................17
6.3. Display Setting Tab...............................................................................................18
6.4. Resolution Tab......................................................................................................19
6.5. CEC Tab...............................................................................................................20
6.5.1. Source Control ...........................................................................................20
6.5.2. Display Control...........................................................................................20
6.5.3. User-defined CEC Command.....................................................................21
6.6. EDID Tab..............................................................................................................21
6.6.1. EDID Setting ..............................................................................................21
6.6.2. EDID Upload ..............................................................................................22
Compact Scaler Switcher
Comm-Tec S.r.l. 3 www.comm-tec.it
6.7. Network Tab .........................................................................................................22
6.8. Tags Tab...............................................................................................................23
6.9. Security Tab..........................................................................................................23
6.10. Additional Tab.....................................................................................................24
6.11. GUI Upgrade ......................................................................................................24
7. RS232 Control................................................................................................................25
7.1. System Commands ..............................................................................................25
7.2. Signal Switching Commands................................................................................26
7.3. Audio Setting Commands.....................................................................................27
7.4. Function Setting Commands ................................................................................28
7.5. CEC Commands ..................................................................................................32
7.6. Special Commands ..............................................................................................34
8. Firmware Upgrade..........................................................................................................36
Compact Scaler Switcher
Comm-Tec S.r.l. 4 www.comm-tec.it
1. Product Introduction
Thank you for selecting the 6x1 4k presentation switcher. The presentation switcher offers
four HDMI, one display port and one USB-C inputs along with mirrored HDMI and HDBaseT
outputs. The HDBaseT output supports PoC and can be paired with a compatible HDBaseT
receiver to extend 4k@30Hz/1080P signal up to 40 meters (131ft) / 70 meters (230ft) all over
a single CATx cable.
The switcher features external line audio input that can be embedded into any HDMI input,
and provides microphone input for audio mixing. The presentation switcher provides multi-
view functionality and supports up to 16 multi-mode layouts. The switcher features a wide
range of control flexibility via front panel buttons, built-in web GUI, IR remote, RS232 and
CEC.
1.1. Features
⚫6x1 4K Presentation Switcher with HDBaseT output.
⚫Supports seamless and auto switching.
⚫HDMI 1.4 and HDCP 2.2 compliant.
⚫Extends HDMI signals to distance up to 40 meters at 4K and 70 meters at 1080p.
⚫Supports audio embedded, audio de-embedding and microphone audio mixing.
⚫Supports multi-view and up to 16 modes can be selected.
⚫Controllable via front panel buttons, GUI, IR remote, RS232 and CEC.
1.2. Package List
⚫1x 6x1 4K Presentation Switcher
⚫2x Mounting Ears with 4 Screws
⚫4x Plastic Cushions
⚫2x 3-pin Terminal Blocks
⚫2x 5-pin Terminal Blocks
⚫1x IR Remote
⚫1x IR Receiver
⚫1x IR Emitter
⚫1x RS232 Cable (3-pin to DB9)
⚫1x Power Adapter (24V DC 5A)
⚫1x Power Cord
⚫1x User Manual
Manufacture
This product is manufactured by:
SHENZHEN PTN Electronics Limited
Add: B6, JinXiongDa Technology Park, HuanGuan Road South 105th
GuanLan Block, LongHua New District
ShenZhen City, 518110, China
Tel: +86-755-2846 1819 - Fax: +86-755-8471 7796
Service: [email protected]
Sales:[email protected]
Website:www.ptn-electronics.com
Compact Scaler Switcher
Comm-Tec S.r.l. 5 www.comm-tec.it
2. Specification
Video Input
Video Input
(4) HDMI IN (1~4), (1) DP, (1) USB-C
Video Input Connector
(4) Type-A female HDMI, (1) DisplayPort, (1) Type-C USB
Input Resolution
HDMI: Up to 4K@30Hz 4:4:4
DP: Up to 4K@30Hz 4:4:4
USB-C: Up to 4K@30Hz 4:4:4
Video Output
Video Output
(1) HDMI, (1) HDBaseT
Video Output Connector
(1) Type-A female HDMI, (1) RJ45
Output Resolution
HDMI: Up to 4K@30Hz 4:4:4
HDBaseT: Up to 4K@30Hz 4:4:4
HDMI Standard
Up to 1.4
HDCP Version
Up to 2.2
Audio Input
Audio Input
(1) LINE, (1) MIC
Audio Input Connector
(2) 3-pin terminal blocks
Frequency Response
20Hz ~ 20kHz, ±3dB
Max Input Level
2.0Vrms ± 0.1
L-R Level Deviation
< 0.3dB, 1kHz sine at 0dBFS level (or max level before clipping)
Input Impedance
> 10KΩ
LINE/MIC Audio Format
PCM 2.0
HDMI/DP Audio Format
PCM 2.0 48K
L+R Audio Output
Audio Output
(1) L+R
Audio Output Connector
(1) 5-pin terminal block
Frequency Response
20Hz ~ 20kHz, ±1dB
Max Output Level
2.0 ± 0.1Vrms
THD+N
< 0.05%, 20Hz ~ 20kHz bandwidth, 1kHz sine at 0dBFS level (or max
level)
SNR
> 80dB, 20Hz ~ 20kHz bandwidth
Crosstalk Isolation
< -70dB, 10kHz sine at 0dBFS level
L-R Level Deviation
< 0.3dB, 1kHz sine at 0dBFS level (or max level before clipping)
Output Load Capability
1KΩ and higher (Supports 10x paralleled 10KΩ loads)
Compact Scaler Switcher
Comm-Tec S.r.l. 6 www.comm-tec.it
Noise Level
-80dB
SPDIF Audio Output
SPDIF Out
(1) SPDIF
Audio Out Connector
(1) Toslink
Max Output level
±0.3dBFS
Frequency Response
20Hz ~ 20kHz, ±1dB
THD+N
< 0.05%, 20Hz ~ 20kHz bandwidth, 1kHz sine at 0dBFS level (or max
level)
Signal-to-Noise Ratio
> 90dB, 20Hz ~ 20kHz bandwidth
Crosstalk isolation
< -70dB, 10kHz sine at 0dBFS level (or max level before clipping)
Noise
- 90dB
Audio Format
PCM 2.0
Control
Control port
(1) CONTACT IN, (1) IR IN, (1) IR OUT, (1) IR EYE,
(1) FIRMWARE, (1) RS232, (1) TCP/IP
Control Connector
(1) 5-pin terminal block, (3) 3.5mm jack, (1) Type-A USB,
(1) 3-pin terminal block, (1) RJ45
General
Operation Temperature
-5℃ ~ +55℃
Storage Temperature
-25℃ ~ +70℃
Relative Humidity
10% ~ 90%
External Power Supply
Input: AC 100~240V, 50/60Hz; Output: 24V DC 5A
Power Consumption
90w (Max)
USB-C Power Charging
60w (Max)
Dimension (W*H*D)
250mm x 44mm x 200mm
Net Weight
1.6KG
Compact Scaler Switcher
Comm-Tec S.r.l. 7 www.comm-tec.it
3. Panel Description
3.1. Switcher Front Panel
①IR LED: Built-in IR sensor, receives IR signal sent from IR remote.
②POWER LED: Illuminates red when switcher is in standby mode or illuminates green
when device is powered on.
③INPUT BUTTONS (1~4): Input source selectors.
⚫HDMI/DP LED: Indicates HDMI or DP source for the third input channel.
⚫HDMI/USB-C LED: Indicates HDMI or USB-C source for the fourth input channel.
④AUTO BUTTON: Auto switching mode selector.
⑤SWAP: Cycle swap the video source of window display in anticlockwise.
⑥MULTIVIEW: Total four buttons for choosing Multi-view mode.
⑦SELECT/FULL SCREENS (A~B): Four buttons for window selection and full screen
setting.
⑧RESIZE: Adjust the windows size.
⑨AUDIO SOURCE: Select the audio source, and the correspond LED (1~4) will
illuminate blue. When select the LINE audio, the button illuminates blue.
⑩VOLUME: Variable audio control
⚫Press the volume knob to select microphone or source audio control.
⚫Rotate the knob to increase or decrease the volume of the selected audio.
⚫Press and hold the knob at least 3 seconds to mute the selected audio, rotate the
knob to unmute.
VOLUME
1 3
HDMI DP
24
BCD
AUTO
A
SELECT / FULL SCREEN
HDMI USB-C
INPUTS
SWAP
RESIZE
MULTIVIEW
AB
CB
D
A
AB
C
D
A B
IR
SOURCE
1 2 3 4 SELECT
MUTE/3s
SOURCE
MIC
AUDIO
78910
3
12
456
Compact Scaler Switcher
Comm-Tec S.r.l. 8 www.comm-tec.it
3.2. Switcher Rear Panel
①INPUTS: Four HDMI inputs, one DisplayPort and one USB-C input.
②OUTPUTS: One HDMI and one HDBaseT output. The HDBaseT output supports 48V
PoC.
③AUDIO IN:
⚫LINE: Line audio input which can be embedded in any HDMI input.
⚫MIC: Microphone input for audio mixing. Set 48V phantom power mode switch as
needed: ON for Condenser microphone; OFF for Dynamic microphone.
④AUDIO OUT:
⚫L+R: Balanced analog audio ouput for audio de-embedding.
⚫SPDIF: Digital SPDIF audio output for audio de-embedding.
⑤CONTROL:
⚫CONTACT IN: Contact external sensors, buttons and other devices for input
source selection.
⚫IR IN: Connects to IR receiver for IR pass-through.
⚫IR OUT: Connects to IR emitter for IR pass-through.
⚫IR EYE: Connects to IR receiver for local switcher control.
⚫FIRMWARE: Type-A USB for firmware upgrade.
⚫RS232: 3-pin terminal block for RS232 control.
⚫TCP/IP: RJ45 port to control the switcher via GUI.
⑥DC 24V: DC connector for power adapter connection.
DC 24V
HDBT
HDMI1. HDMI 4. HDMI
2. HDMI 3. HDMI 3. DP
INPUTS OUTPUTS
4. USB-C
AUDIO IN
L R
LINE
Tx Rx
IR EYEIR IN IR OUT TCP/IPRS232
CONTROL
ON
Phantom 48V)
(
OFF
MIC
AUDIO OUT
FIRMWARE
L RCONTACT IN
1 2 3 4
SPDIF
1
345
26
Compact Scaler Switcher
Comm-Tec S.r.l. 9 www.comm-tec.it
3.3. System Connection
DC 24V
HDBT
HDMI1. HDM I 4. HDM I
2. HDM I 3. HDM I 3. DP
INPUTS OUTPUTS
4. USB -C
AUDIO IN
L R
LINE
Tx Rx
IR EYEIR IN IR OUT TCP/ IPRS23 2
CONTROL
ON
Phantom 48V)
(
OFF
MIC
AUDIO OUT
FIRMWARE
L RCON TACT IN
1 2 3 4
SPDI F
Blu-ray Game Console Laptop Laptop
Macbook Laptop
4K TV Rx
INPUTS
MULTIVIEW
C
B
D
A
B
A BA
C D
A B
User1 User2 User3 User4
MultiviewSwitcher
1 2 3 4
AUDIOSOURCE
1 2 3 4
A B C D
SELECT/FULL S CREEN
CONFIG
MUTERESA/M
VOLUME
Mute
Mute
MIC
Source
3.H 3.DP 4.UC4.H
HDMI:
DP:
IR:
RS232:
HDBaseT:
Ethernet:
Audio:
USB-C:
Audio Player Amplifier
IR
Receier
Remote Remote
Laptop Wireless Router
Compact Scaler Switcher
Comm-Tec S.r.l. 10 www.comm-tec.it
4. Front Panel Control
4.1. Multi-view Mode Selection
There are four multi-view modes can be selected by front panel buttons.
The factory default multi-view mode is quartered window
mode, and there is a one-one correspondence between
the four input sources and the four output windows: input
1 -> window A, input 2 -> window B, input 3 -> window C,
input 4-> window D. The button LEDs (A~D) illuminate
blue.
When switching to two-window (A&B) mode, the
corresponding mode LED will illuminate blue, and the
window A and B LEDs illuminate blue. The factory default
correspondence between the two input sources and the
two output windows is: input 1 -> window A, input 2 ->
window B.
4.2. Full Screen Setting
Press Windows A~D button to select the
corresponding window to display in full-screen.
Meanwhile, the corresponding input source
button LED and window button A LED
illuminate blue, other window buttons and
previous multi-view mode button LED goes out.
4.3. Swap Window Setting
Press SWAP button to cycle swap the video source of window display in anticlockwise, the
SWAP LED lights once when press its button once.
Example: In Multi-view Mode
Example: In Full Screen Mode
SWAP SWAP SWAP
SWAP SWAP SWAP
Indice
Altri manuali Comm-Tec Interruttore
Comm-Tec
Comm-Tec UP-51TS Manuale utente
Comm-Tec
Comm-Tec MTX0808DA Manuale utente
Comm-Tec
Comm-Tec DaisyNET-TX Manuale utente
Comm-Tec
Comm-Tec UP-1200 Manuale utente
Comm-Tec
Comm-Tec UP-42T-CODEC Manuale utente
Comm-Tec
Comm-Tec SW-81VA-2 Manuale utente
Comm-Tec
Comm-Tec UP-1080p Manuale utente
Comm-Tec
Comm-Tec UP-82TS Manuale utente
