Commax CCU-310EV Scheda tecnica
Elevator Call Device CCU-310EV
Product User Guide
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
1
Contents
1. Product Introduction ········································· 2
2. Safety and Precaution ········································ 3
3. Name and Features of each part ··························· 4
4. Product Installation and Setting method···················5
5. How to set the product for each mode ·················· 6
6. How it works ·················································· 20
7. How to set household using PC ························· 22
8. CCU-310EV Factory Reset ································ 29
9. Wiring Diagram ············································ 29
10. Specification ··············································· 32
2
Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the
unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided
below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product.
Model No. Serial No.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
This symbol is intended to alert the use to the presence of uninsulated
“
“dangerous Voltage”
”
within the product’s enclose that
may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the use to the presence of important operating and maintemance(servicing) instructions in the
literature accompanying the appliance
1. Product Introduction
CAUTION : To reduce the risk of electric shock, do not remove cover(or back) no user-serviceable
part inside refer servicing to qualified service personnel
caution
Risk of electric shock
do not open
3
▲
Damage Requiring Service : This equipment from the power source and source and refer servicing to qualified service per-
sonnel under the following conditions
ⓐwhen the power is damaged.
ⓑif liquid has been spoiled or objects have hallen into the unit
ⓒif the equipment has been exposed to rain or water.
ⓓif the equipment has been dropped or otherwise damaged.
ⓔwhen the equipment exhibits a distinct change in performance- this indicates a need for service.
▲
Water and Moisture : Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
▲
Accessories : The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Any
mounting of the manufacture’s instructions, and should use a mounting accessory recommended by the manu-
facturer.
▲
Object and Liquid Entry : Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
▲
Lightning : For added protection for this product before a lightning storm, or when it is left unattached and un used for long
periods of time, unplug it from the wall outlet and disconnect the other system. This will prevent damage to the
product due to lightning and power-line surges. If you live in an ared heavily prone to lightning storms, it is recom-
mended that you invest in power-line, telephone-line, RF cable and actuator / polarization surge protectors to pro-
tect your appliance system from possible damage
2. Safety and Precaution
4
3. Name and Features of each part
ΗDIP Switch : DIP switch for Mode & ID setting.
ΘRS-485 connection terminal : RS-485 DATA connection terminal.
ΙRS-232 Data Port : RS-232 DATA communication line port.(PC DATA connection terminal)
ΚData Port : 481 System DATA communication line port.
ΛStatus LED : LED for operation status check.
Μ481 or 485 setting DIP switch : 481 communication (1, 2, 3 ON) / 485 communication (4, 5, 6 ON))
ΝCall setting button : Guard station calling button during CCU-310EV ID setting.
ΞPower port : DC power terminal (DC adaptor 12V / 1A)
⑨EL connection port : Connection port for EL calling button (PORT_1~PORT_10)
5
4.. Product Setting and setting method
4-1. Product installation and setting method
z This product must be used different modes like household input / household floor / lobby.
Ȅ Caution: When changing to each mode, be sure to change the mode after factory reset.
(For the initialization method, refer to "8. CCU-310EV Factory Reaet".)
z To select mode, check DIP Switch’s S/W1 and S/W2.
household input mode : S/W1 ΓOFF
,
S/W2 ΓOFF”
household floor mode : S/W1 ΓOFF” S/W2 ΓON”
lobby mode : S/W1 ΓON”, S/W2 ΓOFF”
z DIP switch(SETTING S/W)
z This product is an elevator call device that can be linked with the lobby phone and the video
phone according to the mode.
zDIP switch(481 or 485 SETTING S/W)
481 Mode : S/W1,2,3 ΓON” , S/W4,5,6 ΓOFF”
(481 Mode : Home Auto System connection)
＊481 Mode : Please use after connecting 2P DATA
communication line.
485 Mode : S/W1,2,3 ΓOFF”,S/W4,5,6 ΓON”
(485 Mode : Home Network System connection)
＊485 Mode : Please use after connecting 3P RS-485 line.
＊Please refer to the User’s manual of Home Network System.
6
5. How to set the product for each mode
5-1. Setting method when household input mode
(When you call an elevator from a household)
(Note)Only household input mode is supported when RS-485 interface with Home Network
products.
z It supports only the elevator call function in the household,
z The elevator call function is not supported when the door is opened by the lobby phone.
z Applicable for only specific video phone which provides EL call function.
z Household information must be registered in CCU-310EV to use EL calling.
z Only registered household can use EL calling.
z 1 unit of CCU-310EV can register up to 10 households.
z ID of CCU-310EV can be fixed from “1” to “63”.
z 10 households are set for one CCU-310EV (Up to 630 households)
7
Η Set DIP switch to be household input mode.
*( S/W1 Î OFF , S/W2 Î OFF)
Θ Set ID of CCU-310EV using DIP switch (S/W3 ~ S/W8).
(Refer to 5-1-1. “ID setting method by DIP switch”)
Ι Press “ID SET” button to call guard station.
Κ ID of CCU-310EV shown on guade station. (shown like "9501-XXXX")
ex) If S/W8 is ON , shown like “9501-0001”.
(Remark)
Ȅ Meaning of “9501 – 0001”
“9501” : Serial number of CCU-310EV device (household input mode / household floor mode)
“0001” : ID of CCU-310EV just set (by DIP switch)
8
Λ Setting target household’s building No., room No. and SUB No. from guard station.
Ȅ SUB number is the port number of CCU-310EV for elevator call.
Press the expansion button and enter the SUB number.
Ex) Building 101 Room 101 Port 1
1> Calling guard station by CCU-310EV ID_SET button.
2> From guard station (During calling)
“Remote” button Î “101”(building No.) Î “
ミ
”Î “101”(Room No.) Î Extension button
Î “0”(SUB No.) Î “#” Î Call end
Ȅ SUB Number : - SUB number is a port number that such household will use for EL calling.
- SUB number can be set from “0” to “9”.
*
SUB number “0” ~ “9” means CCU-310EV’s “PORT_1” ~ “ PORT_10” numbers.
※ Household input mode must be registered individually for each household.
(“Sub 0” Î “Port_1” ..... Î “
Sub 9
Î “Port_10”)
9
5-1-1. ID setting method by DIP switch (Household input mode)
(S/W3 ~ S/W 8 : BOARD ID setting)
* Please refer to the below instruction.
Number How to set up Number How to set up Number How to set up
1 2 3
Number How to set up Number How to set up Number How to set up
61 62 63
Indice
Manuali Software popolari di altre marche
PS Audio
PS Audio PowerPlay Manuale del proprietario
Brady
Brady LOCKOUT PRO 3.0 Manuale di servizio
Avaya
Avaya Interaction Center Manuale utente
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuale
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuale utente
Oracle
Oracle Application 9i Manuale utente
Acer
Acer RDM Manuale utente
Canon
Canon Vixia HF21 Manuale utente
Canon
Canon ZR950 Manuale utente
Samsung
Samsung Auto Backup Manuale utente
Polycom
Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuale utente