Commell LE-577 Manuale utente
LE-577
5.25’’ Embedded Miniboard
User’s Manual
Edition 1.2
2018/03/29
LE-577 User’s Manual
-1-
Copyright
Copyright 2017, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without prior
written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of their
respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting from
the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications of
the product described within it at any time without notice and without obligation to notify
any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT
LE-577 User’s Manual
-2-
Packing List:
Please check the package content before you starting using the board.
Optional:
Printed Matters:
Driver CD (Including User’s Manual) x 1
1 x LE-577_5.25’’ Embedded Miniboard
(include Cooler Fan)
2 x SATA Cable
(OALSATA3-L / 1040529)
1 x Power Cable
(OALATX-P3S2 / 1040058)
1 x USB2.0 cable
(OALUSBA-3) / (1040173)
1 x Dual COM cable
(OALES-BKU2NB / 1040090)
1 x Audio cable
(OALPJ-HDUNB / 1040123)
1 x PS/2 Keyboard & Mouse cable
(OALPS2/KM / 1040131)
1 x VGA Cable
(OALVGA-SNB-7) / (1040557)
LE-577 User’s Manual
-3-
Index
Chapter 1 <Introduction> ........................................................................................ 4
1.1 <Product Overview>................................................................................. 4
1.2 <Product Specification> ........................................................................... 5
1.3 <Block Diagram>...................................................................................... 6
Chapter 2 <Hardware setup> ................................................................................. 7
2.1 <Connector Location and Reference> ..................................................... 7
2.1.1 <Internal connectors list> ....................................................................8
2.1.2 <External connectors list>...................................................................8
2.2 <Memory Setup>...................................................................................... 9
2.3 <Jumper Location and Reference>........................................................ 10
2.3.1 <Jumper list> ......................................................................................10
2.3.2 <Clear CMOS and Power on type selection> ................................11
2.4 <I/O interface>........................................................................................ 11
2.4.1 <Serial ATA interface> .......................................................................11
2.4.2 <Ethernet interface> ..........................................................................12
2.4.3 <Display interface> ............................................................................12
2.4.4 <Serial Port interface>.......................................................................15
2.4.5 <USB interface> .................................................................................18
2.4.6 <Audio interface> ...............................................................................19
2.4.7 <Expansion slot>................................................................................20
2.4.7.1 < M.2 interface > .............................................................................21
2.4.7.2 < MINI_CARD Setting >.................................................................21
2.4.7.3 < PCIe x16 slot >.............................................................................21
2.4.7.4 < SIMM Setup> ...............................................................................22
2.4.8 <Front panel switch and indicator>..................................................23
2.4.9 <GPIO and Other interface>.............................................................23
2.5 <Power supply>...................................................................................... 26
2.5.1 <Power input>.....................................................................................26
2.5.1 <Power Output> .................................................................................28
Appendix A <Flash BIOS> .................................................................................... 29
Appendix B <LCD Panel Type select>.................................................................. 29
Appendix C <Programmable Watch Dog Timer>.................................................. 31
Appendix D <Hardware monitor > ........................................................................ 32
Appendix E <Programmable GPIO >.................................................................... 33
Appendix F <RAID Setting>.................................................................................. 34
Appendix G < Setup ADP-3355,ADP-3460> ........................................................ 35
Contact information............................................................................................... 35
LE-577 User’s Manual
-4-
Chapter 1 <Introduction>
1.1 <Product Overview>
LE-577 is 5.25’’ Embedded Miniboard which supports Intel® 7th Gen Intel® Core™/
Xeon® H-series Processor with Intel® CM238 Chipset, integrated HD Graphics 530, DDR4
memory, Realtek High Definition Audio, Intel Gigabit LAN, Serial ATA3
The 7th Generation Intel® Core™ H-series processor family is new generation and multi-
core processor built on 14 nanometer process.
Skylake provide new HD Graphics 530/630 support triple displays at the same time,
maximum supported is up to 32GB of DDR4, better performance, flexibility and more
enhanced security that is suitable for a variety of intelligent systems the ideal choice.
All in One multimedia solution
LE-577 provides high performance onboard graphics, 18/24-bit single/dual channel LVDS
interface, DisplayPort, HDMI, VGA and High Definition Audio, to meet the requirement of
the multimedia application.
Flexible Expansion Interface
It includes two minicard slot, PCIe X16 slot, SIM, 2 x M.2 (Key M), 2 x M.2 (KeyE)
Skylake remove EHCI, all USB ports are xHCI
When you install Windows7 with USB device(CDROM, Keyboard, Mouse...), Windows7
can not identify your usb device. You can use SATA CD-ROM and *PS/2 to install
Windows7.
*PS/2 cable is optional.
Kaby Lake only support Windows10 64bit
Intel only support Windows 10 64bit. It may lose some drivers if you use other Windows
version.
LE-577 User’s Manual
-5-
1.2 <Product Specification>
System
Processor
Intel® 7th Gen Intel® Core™/ Xeon® H-series Processor,
FCLGA1440 package
Chipset
Intel® CM238
Memory
2 x DDR4 SO-DIMM 2133 MHz up to 32GB,
Support Non-ECC, unbuffered memory only
Watchdog Timer
Generates a system reset with internal timer for 1min/s ~ 255min/s
Real Time Clock
Chipset integrated RTC with onboard lithium battery
Expansion
2 x M.2 (Key M)for PCIe NVMe 2242/2260/2280mm
2 x M.2 (Key E) for Wi-Fi and Bluetooth 2230mm
2 x MiniPCIe (support mSATA)
1 x Sim slot
1 x PCIe X16 slot (Use ATX power when you install a graphics card)
Graphics
Chipset
Intel® 9th Gen integrated HD Graphics
Display Interface
1 x DisplayPort, 2 x HDMI
1 x LVDS, 1 x VGA
LAN
Chip
1 x Intel® I219-LM Gigabit PHY LAN
3 x Intel® I210-AT Gigabit LAN
I/O
Serial ATA
4x SATA3 interface with 600MB/s transfer rate
Audio
Realtek ALC262 HD Audio
Internal I/O
4 x SATA3, 2 x RS232/422/485, 4 x RS232, 4 x USB2.0, 6 x USB3.0,
1 x LPC, 1 x GPIO, 1 x PS/2, 1 x SMBUS, 1 x Audio
1 x LVDS, 1 x LCD inverter, 1 x VGA
Rear I/O
6 x USB3.0, 4 x LAN, 1 x DC_2P
2 x HDMI, 1 x Display Port,
Mechanical & Environmental
Power Requirement
Standard 24-pin ATX power supply
or 4-pin DC 9~35V(Note that do not use at the same time)
Size
203mm x 146mm (L x W)
Temperature
Operating within 0°C~60°C (32°F~140°F)
Storage within -20°C~80°C (-4°F~176°F)
Relative Humidity
10%~90%, non-condensing
LE-577 User’s Manual
-6-
1.3 <Block Diagram>
CPU
7th Gen
Processor
CM238
PCH-H
1 x DisplayPort
DisplayPort
PTN3460
1 x LVDS
SIO
NCT6106D
Channel A
eDP
eDP
4 x SATA3
SATA3
6 x USB3.0
4 x USB2.0
USB3.0
USB2.0
SPI Flash
SPI
PCIe x3
1 x I219-LM
HDA
HD Audio
PCIe x1
SATA3
LPC
1 x LPC
ALC262
4 x RS232
1 x SMBUS
2 x RS232/RS422/RS485
SMBus
1 x VGA
2 x HDMI
DDI
DDI
DDR4 SO-DIMM 1.2V
Channel B
1 x GPIO
MiniPCIe
/ mSATA
1 x PS/2
PTN3355
DMI GEN3
PCIe x1
3 x I210-AT
PCI Express X16
PEG
DDR4 SO-DIMM 1.2V
PEG
2 x M.2 (Key
M)
PCIe x1
SATA3
MiniPCIe
/ mSATA
PCIe x2
M.2 (Key E)
LE-577 User’s Manual
-7-
Chapter 2 <Hardware setup>
2.1 <Connector Location and Reference>
CN_LVDS
CN_LPC
CN_SMBUS
CN_PS2
JFRNT
CN_USB2-1
PCI_E16X
CN_COM3/4
CN_COM5/6
CN_DIO
CN _INV
CPUFAN
DC_IN
ATX
DDR4_A
DDR4_B
M2-1
M2-2
MINI_CARD1
MINI_CARD2
CN_CRT
CN_USB2-2
CN_COM1/2
SYSFAN
SATA3-4
SATA3-3
SATA3-2
SATA3-1
SIMM
M2-3
M2-4
LE-577 User’s Manual
-8-
2.1.1 <Internal connectors list>
Connector
Function
DDR4_A/B
260-pin DDR4 SO-DIMM slot
SATA3-1/2/3/4
7-pin Serial ATA3 connector
CN_AUDIO
5 x 2-pin audio pin header
CN_LPC
6 x 2-pin LPC pin header
CN_LVDS
20 x 2-pin LVDS connector
CN_INV
5-pin LCD inverter connector
CN_SMBUS
5-pin SMBus connector
CN_COM1/2, 3/4/, 5/6
20-pin RS232 connector
CN_USB 2-1/2-2
5 x 2-pin USB2.0 pin header
CN_PS2
5 x 2-pin PS/2 pin header
CN_DIO
6 x 2-pin digital I/O connector
CN_CRT
16-pin VGA connector
CPUFAN
4-pin CPU fan connector
SYSFAN
4-pin system fan connector
JFRNT
14-pin front panel switch/indicator connector
MINI_CARD1/2
52-pin MiniPCIe card slot
M2-1/2
75-pin M.2 Key E slot
M2-3/4
75-pin M.2 Key M slot
ATX
24-pin power supply connector
DC_4P
4-pin power input Terminal Block
SIMM
6-pin socket
2.1.2 <External connectors list>
Connector
Function
DisplayPort
DisplayPort connector
HDMI
HDMI connector
USB3.0
USB3.0 connector
LAN
RJ45 connector
DC_2P
2-pin power input Terminal Block
DC_2P
HDMI
DisplayPort
LAN1
LAN2
LAN3
LAN4
I210-AT
I219-LM
USB3.0
LE-577 User’s Manual
-9-
2.2 <Memory Setup>
In the process, the board must be powered off.
1. Put the memory tilt into the slot. Note the Memory notch key aligned slot key.
2. Then press down till lock into the mounting notch.
3. To remove the memory, push outward on both sides of the latch.
Key
Mounting notch
Press down
Latch
Indice
Altri manuali Commell Computer a scheda singola
Manuali Computer a scheda singola popolari di altre marche
Boser
Boser HS-7321 Manuale utente
Premier Farnell
Premier Farnell Embest SBC8530 Manuale utente
MicroSys Electronics
MicroSys Electronics miriac SBC-LS1043A2 Manuale utente
Aaeon
Aaeon UP Manuale utente
Portwell
Portwell WUX Series Manuale utente
Lanner electronics
Lanner electronics IAC-F847 Series Manuale utente