Comnet CNFE10MS Manuale utente

CNFE10MS QIG

(7) 10/100TX + (3) 100Mbps RJ-45 / 100FX SFP

Industrial Fast Ethernet Managed Switch

Quick Installation Guide

V1.00 www.comnet.net

Introduction

The ComNet CNFE10MS is a managed industrial Ethernet Switch, equipped with (7) 10/100TX ports and (3)

Fast Ethernet Copper / SFP-100FX combo ports. It has a rugged aluminum case and can operate over a wide

temperature range. The software supports full L2 management features, ring redundancy, network control,

security and alert features. The ComNet CNFE10MS also supports RS-232 console for out of band

management.

Hardware Installation

1. Unpack the box, you will find

ComNet CNFE10MS Industrial Managed Switch

RS-232 DB9 to RJ-45 console cable

Quick Installation Guide

CD User Manual

Wall Mount plate and Mounting kit

Power Supply

2. Mounting the unit - You can mount the din-rail clip on the rear of ComNet CNFE10MS on the DIN rail.

3. Power the unit and connect to network

3.1 Connect the PWR1 / PWR2, and the unit will power on. PWR1 / PWR2 LED will turn Red to show unit

booting up. When the unit is ready, the LED turns Green.

3.2 Connect the 10/100M Ethernet Port: Connect the network nodes to the ComNet CNFE10MS with

2/4-pair CAT5 UTP cable. The 10/100M interfaces support auto MDI/MDIX.

3.3 Connect the 100Mbps RJ-45 combo ports: Connect the network node to the ComNet CNFE10MS with

2/4-pair CAT-5 UTP or STP cable. The 100Mbps RJ-45 combo ports only support 10Mbps in full duplex,

100Mbps in full or half duplex mode.

3.4 Connect the SFP transceiver: Plug in SFP fiber transceiver. We recommend using ComNet certificated

SFP mini GBIC transceiver. Cross-connect the transmit channel at each end to the receive channel at the

opposite end as illustrated in the figure below.

Accept 12~24AWG wire. ComNet CNFE10MS provides reverse polarity protection.

This is a Class 1 Laser/LED product.

Don’t stare at the Laser/LED Beam.

ATTENTION

3.5 Should you need to connect the Digital Input or Relay Output, please refer to the wiring method

introduced in the manual.

Device Management

ComNet CNFE10MS Industrial Managed Switch provides both in-band and out-band configuration methods. You can

configure the switch via the RS232 console with the attached console cable or remotely manage the switch via network

by telnet, web browser interface.

1. Preparation for console management: Attach the RS-232 DB9 connector to your PC’s COM port. Connect the RJ-45

connector to the console port of the ComNet CNFE10MS.

1.1 Go to Start -> Program -> Accessories -> Communication -> Hyper Terminal

1.2 Give a name to the new console connection.

1.3 Choose the COM name, and select the correct serial settings. The serial settings of the CNFE10MS are as

below:

Baud Rate: 9600 / Parity: None / Data Bit: 8 / Stop Bit: 1

1.4 After connected, you can see Switch login request. Type the username and password then you can login.

The default username is “admin”, password is “admin”.

1.5 Follow the manual to configure the software features.

2. Preparation for Web management: Before you attempt to use the embedded web interface to manage switch

operation, verify that your CNFE10MS is properly installed on your network and that every PC on this network can

access the switch via the web browser.

2.1 Launch the web browser (Internet Explorer or Mozila Firefox) on the PC.

2.2 Type http://CNFE10MS_IP_Address (The default IP address is 192.168.10.1.) then press Enter.

2.3 The login screen will appear next. Key in the user name and the password. The default user name and

password is admin/admin.

2.4 Click OK, and then the welcome page of the web-based management interface will appear.

2.5 At the left column of the web management interface are the software features, the right column will list the

available settings.

3. Should you need to manage the switch by Telnet/SSH, please refer to the chapter 3 of ComNet CNFE10MS

manual.

ComNet Customer Service

Customer Care is ComNet Technology’s global service center, where our professional staffs are ready to

answer your questions at any time. Email address of ComNet Global Service Center:

customercare@ComNet.com

Communication Networks

3 Corporate Drive

Danbury, CT 06810

T 203 796-5300

F 203 796-5303

888 678-9427 Tech Support

info@ComNet.net

The COMNET logo is a registered trademark of Communication Networks Corporation

Additional Company and product names may be trademarks or registered trademarks of the individual

companies and are respectfully acknowledged and do not imply endorsement.

Indice

Altri manuali Comnet Router di rete

Comnet

Comnet CLFE4US1TPC Manuale utente

Comnet

Comnet CWGE2FE8MSPOE Manuale utente

Comnet

Comnet CWFE8TX8MS Manuale utente

Comnet

Comnet RLXE4GE24MODMS Manuale utente

Comnet

Comnet CNGE3FE8MS Manuale utente

Comnet

Comnet CWGE2FE24MODMS Manuale utente

Comnet

Comnet CNGE11FX3TX8MS Manuale utente

Comnet

Comnet RLXE4GE24MODMS Manuale utente

Comnet

Comnet CNGE24FX12TX12MSPOE Manuale utente

Comnet

Comnet NW7/M Manuale utente

Comnet

Comnet CLFE4+1SMS[POE](C Manuale utente

Comnet

Comnet CWGE9MS Manuale utente

Comnet

Comnet CNGE24MS Manuale utente

Comnet

Comnet CNGE20FX4TX16MS Manuale del proprietario

Comnet

Comnet CNGE2FE24MS Manuale utente

Comnet

Comnet CNGE24MS-OB Manuale utente

Comnet

Comnet CNGE3FE7MS4 Manuale utente

Comnet

Comnet reliance RL1000GW Manuale utente

Comnet

Comnet netwave NW3 Guida all'installazione

Comnet

Comnet CNGE8US Series Manuale utente

Comnet

Comnet CNGE28FX4TX24MS2 Manuale del proprietario

Comnet

Comnet CNFE4+1SMSM2 Manuale utente

Comnet

Comnet CWFE2COAX Manuale del proprietario

Comnet

Comnet CWFE8MS/DIN Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza