Comnet CNGE8MS Manuale utente

INSTALLATION AND OPERATION MANUAL

CNGE8MS

8-PORT MANAGED GIGABIT SWITCH

v2.0 Sept 2012

The ComNet™CNGE8MS is an 8-port Managed Ethernet Switch designed to

reliably operate in harsh, environmentally challenging applications. It features

four (4) 1000BASE-TX and four (4) gigabit combo ports. The four combo ports are

10/100/1000Mbps configurable for either Cat5-e copper, or multimode or single-

mode optical fiber by the use of optional ComNet SFPs for connector type and

distance. Exclusive to ComNet is C-Ring, a feature that protects the network from

interruptions or temporary malfunctions with fast recovery technology. Legacy ring

allows the switch to be used in an existing ring of ComNet X-Ring enabled switches.

Redundant DC inputs are included for uninterrupted operation in the event of a power

supply failure. The electrical ports support the 10/100/1000Mbps Ethernet IEEE802.3

protocol, and auto-negotiating and auto-MDi/MDiX features are provided. These

network-managed layer 2 switches are optically and electrically compatible with any

IEEE802.3 compliant Ethernet device. The CNGE8MS is DIN-rail or wall-mountable.

Rev. 2.21.13

INS_CNGE8MS_REV–

09/17/12 PAGE 2

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Contents

Regulatory Compliance Statement 4

Warranty 4

Disclaimer 4

Safety Information 4

Overview 5

Introduction 5

Software Features 5

Hardware Features 6

Hardware Installation 7

Installing the Switch on DIN-Rail 7

Wall Mounting Installation 9

Hardware Overview 10

Front Panel 10

Front Panel LEDs 12

Top View Panel 13

Rear Panel 14

Cables 15

Ethernet Cables 15

SFP 18

Console Cable 18

WEB Management 20

Command Line Interface Management 71

About CLI Management 71

Commands Set List—System Commands Set 76

Commands Set List—Port Commands Set 78

Commands Set List—Trunk command set 80

Commands Set List—VLAN command set 81

Commands Set List—Spanning Tree Command Set 82

Commands Set List—QoS command set 83

INS_CNGE8MS_REV–

09/17/12 PAGE 3

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Commands Set List—IGMP command set 84

Commands Set List—MAC/Filter Table command set 85

Commands Set List—SNMP command set 86

Commands Set List—Port Mirroring command set 87

Commands Set List—802.1x command set 87

Commands Set List—TFTP command set 88

Commands Set List—SYSLOG, SMTP, EVENT command set 89

Commands Set List—SNTP command set 91

Commands Set List— Ring command set 92

Technical Specifications 93

INS_CNGE8MS_REV–

09/17/12 PAGE 4

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Regulatory Compliance Statement

Product(s) associated with this publication complies/comply with all applicable regulations. Please

refer to the Technical Specifications section for more details.

Warranty

ComNet warrants that all ComNet products are free from defects in material and workmanship

for a specified warranty period from the invoice date for the life of the installation. ComNet will

repair or replace products found by ComNet to be defective within this warranty period, with

shipment expenses apportioned by ComNet and the distributor. This warranty does not cover

product modifications or repairs done by persons other than ComNet-approved personnel, and

this warranty does not apply to ComNet products that are misused, abused, improperly installed,

or damaged by accidents.

Please refer to the Technical Specifications section for the actual warranty period(s) of the

product(s) associated with this publication.

Disclaimer

Information in this publication is intended to be accurate. ComNet shall not be responsible for its

use or infringements on third-parties as a result of its use. There may occasionally be unintentional

errors on this publication. ComNet reserves the right to revise the contents of this publication

without notice.

Safety Information

»Only ComNet service personnel can service the equipment. Please contact ComNet Technical

Support.

»The equipment should be installed in locations with controlled access, or other means of

security, and controlled by persons of authority.

INS_CNGE8MS_REV–

09/17/12 PAGE 5

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Overview

Introduction

The CNGE8MS is a powerful managed industrial Ethernet switch containing many unique features.

These switches can work under a wide temperature range, dirty environmental and humidity

conditions.

WEB-based, TELNET, Console port or other third-party SNMP software can manage the

CNGE8MS as well. The switch can be managed by a useful utility called eConsole, a powerful

network management software. With its user-friendly and powerful interface, multiple switches

can be easily configured at the same time, and switches’ statuses monitored.

Software Features

»Redundant Ethernet Ring: C-Ring (Recovery time <30ms over 250 units connection)

»Supports Ring Coupling, Dual Homing over C-Ring technology

»Supports SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN Network Management

»Event notification by Email, SNMP trap and Relay Output

»Web-based, Telnet, Console, CLI configuration

»Enable/disable ports, MAC based port security

»Port based network access control (802.1x)

»VLAN (802.1q) to segregate and secure network traffic

»Radius centralized password management

»SNMPv3 encrypted authentication and access security

»RSTP (802.1w)

»Quality of Service (802.1p) for real-time traffic

»VLAN (802.1q) with double tagging and GVRP supported

»IGMP Snooping for multicast filtering

»Port configuration, status, statistics, mirroring, security

»Remote Monitoring (RMON)

INS_CNGE8MS_REV–

09/17/12 PAGE 6

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Hardware Features

»Two Redundant DC power inputs

»Operating Temperature: -40˚ C to +75˚ C (-40˚ to +167˚ F) Functional to +85˚ C (185º F)

»Storage Temp: -40˚ C to +85˚ C (-40˚ to 185°F)

»Storage Temperature: -40º to 85ºC

»Operating Humidity: 5% to 95%, non-condensing

»Casing: Aluminum

»4 × 10/100/1000BASE-T(X) Gigabit Ethernet port

»4 × 100/1000BASE-X SFP & 10/100/1000BASE-T(X) Combo port

»Console Port

»Dimensions (W × D ×H): 2.93 × 4.3 × 6.05 in (7.43 × 10.92 × 15.36 cm)

INS_CNGE8MS_REV–

09/17/12 PAGE 7

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Hardware Installation

Installing the Switch on DIN-Rail

Each switch has a DIN-Rail kit on the rear panel. The DIN-Rail kit affixes the switch to the DIN-Rail.

It is easy to install the switch on the Din-Rail:

Metal Spring

INS_CNGE8MS_REV–

09/17/12 PAGE 8

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Mount Series on DIN-Rail

Step 1: Tilt the switch and mount the metal spring to DIN-Rail.

Step 2: Push the switch toward the DIN-Rail until you hear the spring snap into place

INS_CNGE8MS_REV–

09/17/12 PAGE 9

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Wall Mounting Installation

Each switch has another installation method for users to fix the switch. A wall mount panel can be

found in the package. The following steps show how to mount the switch on the wall:

Mounting the CNGE8MS on a Wall

Step 1: Remove Din-Rail kit.

Step 2: Use the included screws to attach the wall mount panel as shown in the diagram below.

The screw specifications are shown in the following two pictures. In order to prevent switches from

being damaged, the screws should not be larger than the size that used in CNGE8MS switch.

INS_CNGE8MS_REV–

09/17/12 PAGE 10

INSTALLATION AND OPERATION MANUAL CNGE8MS

Tech SupporT: 1.888.678.9427

Hardware Overview

Front Panel

The following table describes the labels that are attached to the CNGE8MS.

Port Description

10/100/1000

BASE-T(X) RJ-45

fast Ethernet

ports

4 × 10/100/1000BASE-T(X) RJ-45 fast Ethernet ports supporting auto-

negotiation.

Default Settings:

Speed: auto

Duplex: auto

Flow control: disable

Gigabit Combo

Ports

10/100/1000BASE-T(X) RJ-45 + 100/1000BASE-X SFP Ports

Console Use supplied RS-232 to RJ-45 cable to connect to the switch.

Indice

Altri manuali Comnet Interruttore

Comnet

Comnet CNGE28FX4TX24MS Series Manuale utente

Comnet

Comnet CNGE28FX4TX24MSPOE+ Manuale utente

Comnet

Comnet CNXE2GE2TX8MSPOE Manuale utente

Comnet

Comnet CWGE24MS Manuale utente

Comnet

Comnet CNFE4+1SMS2POE Manuale utente

Comnet

Comnet CLFE IPS Series Manuale utente

Comnet

Comnet CWGE10FX2TX8MSPOE Manuale utente

Comnet

Comnet CNGE3FE8MSPOEHO Manuale utente

Comnet

Comnet CWGE26FX2TX24MSPOE Manuale utente

Comnet

Comnet CNGE11FX3TX8MS Manuale utente

Comnet

Comnet CNFE4SMSPOE Manuale utente

Comnet

Comnet CNGE4US Manuale utente

Comnet

Comnet CNFE5SMS Manuale utente

Comnet

Comnet CLFE4+2SMS Series Manuale utente

Comnet

Comnet CNGE2+2SMS Manuale utente

Comnet

Comnet CNGE2FE8MSPOE2 Manuale utente

Comnet

Comnet CWGE24MODMS Manuale utente

Comnet

Comnet CNGE4TX4US/M Manuale utente

Comnet

Comnet CNXE2GE2TX8MSPOE Manuale utente

Comnet

Comnet CNGE2+2SMS Manuale utente

Comnet

Comnet CNGE2FE16MS Manuale utente

Comnet

Comnet CWGE28FX4TX24MS Manuale utente

Comnet

Comnet RELIANCE RLGE2FE16R Manuale utente

Comnet

Comnet CNGE2FE24MSPOE Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente