Compex NetPassage 27G Manuale utente

Quick Install Guide

Wireless-G Broadband Multimedia Router

Compex NetPassage 27G

TABLE OF CONTENTS

1: INTRODUCTION.......................................................................................... 1

Package Content .................................................................................... 1

2: NETWORK INFRASTRUCTURE ...................................................................... 2

3: LET’S GET GOING-HARDWARE SETUP........................................................ 3

Power Up in 4 Steps.................................................................................. 3

4: GETTING STARTED WITH WIZARD SETUP..................................................... 4

5: CONFIGURING TCP/IP SETTINGS............................................................. 12

6: CONFIGURING WIRELESS NETWORK CONNECTION............................... 14

7: SCHEMATIC OVERVIEW........................................................................... 15

8: TECHNICAL SPECIFICATION.................................................................... 18

Chapter 1 Introduction

1: Introduction

Thank you for purchasing the Wireless-G

Broadband Multimedia Router. This Wireless-

G router with two USB1.1 ports connects the

USB devices to be shared with others. Typical

devices include printers and hard drives.

There are endless possibilities with what you

can do using this Multimedia router.

Download songs and store them in the

shared hard drive so others can play them as

well. Download photos save them in the

shared USB hard disk and print them to the

shared USB printer.

Of course, it is also a full-fledge router allowing you to share the broadband

Internet connection with several users in your home. The router is, additionally,

equipped with advanced features that will make it suitable for the office as

well.

Package Content

The router retail package contains the following items to start you off:

• 1x Wireless-G Router

• 1x External Power Adapter

• 1x Quick Install Guide

• 1x Product CD (containing User’s Manual, Firmware Recovery Tool &

Utilities)

Chapter 2 Network Infrastructure

2: Network Infrastructure

Only a few simple steps are required to set up the router to begin sharing your

broadband Internet connection between your wired and wireless network

clients.

Example: Broadband Internet Access Distribution to a Fast Ethernet Network &

Wireless Network

Router

Wireless LAN clients access

the Internet and the wired

LAN via the router

Connect from computers to

the integrated 4-port

10/100Mbps switch to form

wired LAN

Connect from

Cable/ADSL Modem to

WAN port

Chapter 3 Let’s Get Going – Hardware Setup

3: Let’s Get Going-Hardware Setup

Power Up in 4 Steps

In 4 simple steps, you shall have your router wired and functional. After which,

you may proceed to the software configuration to get ready to surf the Internet

at high-speed!

Connect one end of the Ethernet cable to your Cable/ADSL modem,

and then connect the other cable end to the socket labeled WAN on

the router.

Connect one of the LAN ports to a PC with an RJ45 Ethernet cable.

Connect the USB devices (such as storage disk or printer) to the USB

ports of the router.

Next, plug in the power adapter that is supplied to the main electrical

supply, and connect the power plu

to the socket on the router.

Please do not turn on the power during the installation for safety

reasons. Reboot the PC.

Chapter 3 Let’s Get Going – Hardware Setup

4: Getting Started with Wizard Setup

1. Insert the Product CD to your CD-ROM drive, go to the Utilities section and

run the uConfig program.

2. The program will prompt you with the following message. Click on the Yes

button to proceed.

3. Select Wireless-G Broadband

Multimedia ROUTER and click

on OpenWeb button.

Alternatively, you may also

launch your Internet Explorer

browser (or Netscape). At the

Address field, key in

http://192.168.168.1.

Next, the system will prompt

you not to close the uConfig

program until you wish to exit

your web-based interface.

Click Ok button to proceed.

Chapter 3 Let’s Get Going – Hardware Setup

4. Next, an authentication page

will appear as shown on the

right. The default password,

which is password, is pre-

entered in the field provided.

Click on the LOGIN! button to

access the main page of the

router.

5. Check the radio button next to Basic Setup. Click on the Next button.

Chapter 3 Let’s Get Going – Hardware Setup

6. The first page of the Setup Wizard will appear, showing an overview of the

basic setup.

• Internet Connection

This functionality lets you

specify the type of Internet

Connection you are using.

• Wireless Setup

This functionality lets you

configure the settings of the

router to suit your wireless

network.

• Router Settings

This functionality lets you

identify the router and create

a workgroup for the router. It

also lets you set up your local

time zone.

Chapter 3 Let’s Get Going – Hardware Setup

7. Select your WAN connection,

from the following types of

Internet Connection:

• Static IP

For configuring Static IP, you

need to manually enter the IP

Address, Network Mask and

Gateway IP Address that are

provided by your ISP.

• Dynamic IP

(used as an example in this

guide)

• PPPoE

For configuring PPPoE, you

have to enter the account

Username and Password that

are provided by your ISP.

• PPTP

For configuring PPTP, you have

to enter the account

Username, Password, Network

Mask and VPN Server that are

provided by your ISP. Take

note that VPN Server refers to

the IP address of your ISP’s

PPTP server.

• L2TP

For configuring L2TP, you have

to click on the Change button

and enter the account

Username, Password, Network

Mask and VPN Server that are

provided by your ISP. Take

note that VPN Server refers to

the IP address of your ISP’s

L2TP server.

To proceed, click on the Next

button.

Chapter 3 Let’s Get Going – Hardware Setup

8. To set up your wireless network,

configure the following

parameters:

• SSID

The default SSID is ‘router’.

Click on the Change button to

enter your preferred SSID

name.

• Channel

Click on the down-arrow

button next to Channel. From

the list, select your preferred

wireless network channel.

• Security Mode

You may choose to enable

WEP or WPA-PSK to secure

your wireless network

connection.

If WEP is enabled, select Hex or

ASCII for the key string type to

be used. Select 64Bit or 128Bit

for the transmission key. Then

enter the corresponding

transmission key.

Use the Reset button to clear

the transmission key.

Indice

Altri manuali Compex Router wireless

Compex

Compex NetPassage 28G Hotspot Manuale utente

Compex

Compex NetPassage 28G Manuale di istruzioni

Compex

Compex Wireless-G Internet Router NP25G 6C Manuale utente

Compex

Compex NP12N 6REU Manuale utente

Compex

Compex MRL21E Manuale utente

Compex

Compex NetPassage 28G Manuale utente

Compex

Compex NetPassage 28G Hotspot Manuale utente

Compex

Compex NetPassage 28G Manuale utente

Compex

Compex NetPassage 28G Manuale utente

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente