CompuLab Fit-PC2i Manuale utente

fit-PC2i

Owner’s Manual

fit-PC2i Owner’s Manual

21-Dec-2010

Introduction

Package contents

Hardware specifications

fit-PC2i features

Quick start guide

Connecting fit-PC2i

Booting Linux (applies to fit-PC2i Linux)

Booting Windows 7 (applies to fit-PC2i Win7)

Maintenance

Affixing rubber feet

Installing Hard Disk

BIOS Setup Utility

BIOS Setup Utility Sections

Warranty and RMA

Warranty

RMA

Tips for saving power

General

In BIOS

In Operating System

For more information and to obtain the latest revision of this document, please visit

www.fit-pc.com

Introduction

Package contents

1. fit-PC2i computer

2. 12V DC power supply

3. AC cord with North American or localized standard plug

4. HDMI to DVI adapter

5. 3.5mm to RCA cable

6. 2 mini-USB to USB-A adapters

7. Mini serial to DB-9 cable

8. 4 Rubber feet

9. WiFi antenna (in some models)

To use fit-PC2, you will need:

A display with DVI or HDMI input + DVI or HDMI cable

USB keyboard and mouse

Hardware specifications

CPU

Intel Atom Z510/Z530/Z550 *

Chipset

Intel US15W

RAM

1GB / 2GB DDR2-533 *

Storage

160GB Hard Disk *

Display

DVI up to 1920x1200

Audio

S/PDIF 5.1 channels

Stereo line-out, line-in / mic

WiFi

802.11b/g*

Ethernet

2x 1000BaseT RJ45

USB

4 ports USB 2.0 Hi-Speed 480Mbps

Serial

RS232 full UART

Power

12V DC

__________________

*Depending on model

fit-PC2i features

USB

There are 4 USB ports –2 USB A ports on the back and 2 mini-USB on the front. All ports support High-

speed USB 2.0 - 480 Mbps.

Ports on the back are upside down –note when connecting USB plugs.

Serial port

The RS232 serial port is placed on the front panel. Use the provided mini-serial to DB9 cable to connect

to standard serial devices.

DVI

Display interface is DVI-D over HDMI connector.

To connect fit-PC2i to a DVI display

Use the provided HDMI to DVI adapter. Use a DVI cable to connect the adapter to the display.

To connect fit-PC2i to a flat-screen TV

Use an HDMI cable between the HDMI connector and HDMI input of the TV.

Note: Audio should be connected separately.

miniSD

The miniSD socket supports miniSD cards, including SDIO and SDHC.

Audio

There are 2 standard 3.5mm jacks on the back.

left:

S/PDIF using provided cable

Stereo line-out

Right:

Microphone

Stereo line-in

LAN

fit-PC2i has 2 10/100/1000BaseT Ethernet ports using a standard RJ45 connectors. Use a standard

Ethernet cable to connect.

The connector has built-in LEDs that are lit when a connection is detected.

WLAN

A WLAN antenna is supplied in models with integrated WiFi and should be screwed into the standard

SMA connector.

Power button

fit-PC2i has a tactile power push-button. It is used for turning on/off the fit-PC and for standby/resume

when supported by the operating system.

A push of at least 5 seconds will always turn off the fit-PC2i.

Note: fit-PC2i supports auto-on. When connected to power it will power-up automatically.

LEDs

fit-PC2i has 3 indicator LEDs.

From left to right –

HDD activity

WLAN enabled / activity

Power

Quick start guide

Connecting fit-PC2i

Turn off the display and connect it to the fit-PC2i HDMI connector (use the HDMI to DVI

adapter if needed).

Connect the USB keyboard and mouse to USB connectors.

Plug the speakers into the line-out jack.

Plug the Ethernet cable into the Ethernet connector.

In fit-PC2i models with WiFi: Mount the WiFi Antenna on the SMA connector by turning it

clockwise repeatedly until the antenna holds firm.

Insert the DC plug into the fit-PC2i DC in jack.

It is recommended to secure the power plug using the adjacent screw.

Connect the power supply to the AC cord and plug the cord into AC outlet. The power LED

should light up as the fit-PC2i boots.

Booting Linux (applies to fit-PC2i Linux)

Linux loads automatically on power up.

Password: 111111

Booting Windows 7 (applies to fit-PC2i Win7)

Upon first power-up, you will be guided through the Windows Welcome procedure which is self-

explanatory. The Windows 7 serial number is printed on the Windows 7 label on the bottom of your fit-

PC2i.

Maintenance

The fit-PC2i requires no maintenance. You should not take the fit-PC2i apart - this will void its warranty.

The following operations can be conducted by the user:

Affixing rubber feet

You should stick the rubber feet to the bottom of the fit-PC2i to protect the supporting surface.

Recommended rubber feet placement is shown below:

Installing Hard Disk

1. Open the two HDD screws on the HD door as indicated below and remove it.

2. Release spacers using a 5.5mm nut-driver and remove with attached screw.

3. Slide-in HDD.

4. Tighten the four HDD screws indicated below.

Removing Hard Disk

1. Open the two HDD screws on base

2. Push out the HDD cover as indicated below. Hard disk will slide out.

BIOS Setup Utility

Entering BIOS Setup Utility

Turn off the fit-PC2i.

Turn on while holding down the F2 key.

Screen Layout

Menu is on the top.

The left pane shows configuration items. When an item is highlighted, the right pane displays help for

this item.

Navigation keys are detailed on the bottom.

Restoring BIOS Defaults

Select Exit



Load Setup Defaults and Exit Saving Changes

Booting over LAN (PXE)

Select Chipset Control Sub-Menu Gigabit LAN Enable

Select Chipset Control Sub-Menu LAN PXE BOOT Enable

Save settings and reboot

BIOS Setup Utility Sections

Main

Setting date and time

Large Disk Access Mode [DOS | Other] –select DOS for Windows XP and Linux

Primary Master –hard disk identification. If on-board flash is present it will be automatically

detected.

Primary Slave - Usually automatically detects an installed hard disk

Memory Cache –should be enabled

BIOS Date –indicates when BIOS was generated, useful if you consider BIOS update

Advanced

Installed O/S –select WinXP for Windows and Linux

Keyboard Features - standard keyboard settings

Summary Screen –displays system configuration on boot

QuickBoot mode –perform fewer tests during boot for a quicker boot

Watchdog Timer –enable or disable watchdog timer which reboots on hang

Watchdog Timer Value [sec] –set watchdog delay (31 to 255 seconds)

Start Etherlink - start Etherlink utility for updating BIOS over LAN

Load and run APCC code –used for custom pre-boot chipset configuration

Intel

CPU Control Sub-Menu

oHyperthreading –enable or disable hyperthreading

oProcessor Full Speed –select power management policy

oNo Execute –enable or disable NX bit virus protection

oIntel Virtualization –enable or disable virtualization support

Chipset Control Sub-Menu

oAudio –enable or disable audio

oSDIO –enable or disable SD socket

oPCI Express –Root Port 1 –enable or disable PCIe port of Ethernet 1

oPCI Express –Root Port 2 –enable or disable PCIe port of Ethernet 2

Video (Intel IGD) Control Sub-Menu

oGraphic Memory Aperture Size –[256MB | 128MB] Select how much memory to

allocate for graphics. Main memory available is reduced by the amount chosen

Security

This section allows the setting of:

Supervisor password for protecting setup utility

User password for protecting fit-PC2i boot

If you wish to clear a password, set a new, blank password.

Boot

Select a boot sequence between the built-in HDD, built-in flash disk, USB thumb drive (USB key), USB

CDROM, USB HDD, USB Floppy (FDC) and SD.

Booting over LAN (PXE) is enabled separately (see above).

Exit

Standard options for saving/discarding BIOS changes or reloading BIOS defaults.

Indice

Altri manuali CompuLab Scrivania

CompuLab

CompuLab IPC3 Manuale utente

CompuLab

CompuLab IPC2 Manuale utente

CompuLab

CompuLab Airtop3 Manuale utente

CompuLab

CompuLab UTILITE2 Manuale utente

CompuLab

CompuLab Airtop2 Manuale utente

CompuLab

CompuLab fitlet2 FC-USB Manuale utente

CompuLab

CompuLab Fitlet2 FC-POED Manuale utente

CompuLab

CompuLab fit-PC2 Manuale utente

CompuLab

CompuLab Airtop Manuale utente

CompuLab

CompuLab fitlet2 FC-USB Manuale utente

CompuLab

CompuLab Trim-Slice Manuale utente

CompuLab

CompuLab Fitlet FC-OPLN Manuale utente

CompuLab

CompuLab FIT-PC4 Manuale utente

CompuLab

CompuLab Airtop-C0 Manuale utente

CompuLab

CompuLab fitlet3 Manuale utente

CompuLab

CompuLab Tensor-I22 Manuale utente

CompuLab

CompuLab SBC-FITPC3 Manuale utente

CompuLab

CompuLab fitlet Manuale utente

CompuLab

CompuLab fitlet2 FC-USB Manuale utente

CompuLab

CompuLab Fitlet-H Manuale utente

Manuali Scrivania popolari di altre marche

HP m9060n - Pavilion - Elite Scheda tecnica

Asus

Asus E210 Series Manuale utente

Dell

Dell Inspiron 600m Manuale utente

Dell

Dell Inspiron 3662 Manuale utente

TotalFlow

TotalFlow uFLO Manuale utente

HP Presario SV7000 - Desktop PC Manuale utente

HP ProDesk 400 G5 Manuale

Logitech

Logitech MK320 Manuale utente

Dell

Dell XPS 730 H2C Manuale utente

Sony

Sony Vaio Series Manuale utente

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuale utente

Alto

Alto MD 250 Manuale utente

Lenovo

Lenovo ThinkCentre Edge 72 Manuale

Lenovo

Lenovo ThinkStation D20 Manuale

Arbor Technology

Arbor Technology FPC-7800 Series Manuale utente

Sony

Sony VAIO VGX-TP1 Series Manuale utente

Asus

Asus Eee Box B204 Manuale utente

Dell

Dell Optiplex 9010 All In One Manuale utente

CompuLab fit-PC2i Manuale utente

Manuali Scrivania popolari di altre marche