Comtrend Corporation GS-7608 Manuale utente

Quick Installation Guide

GS-7608 | 8-Port PoE Gigabit Ethernet Smart-Lite Switch

Product Information

I-1. Package Contents

1. GS-7608 PoE Switch

2. QIG

3. Power Cable

4. 4 x Foot Pads

5. Rack-Mount Kit

I-2. Hardware Overview

Front Panel

The front panel of the switch consists of:

8 x 10/100/1000Mbps RJ-45 Ports

oPorts 1-8 are PoE Capable

oPorts 9-10 are SFP transceiver Capable

A Series of LED Indicators

Rear Panel

The rear panel of the switch features the AC power connector

(DC IN 53V / 2.83A)

I-3. LED Indicator

Power/SYS:

LED Status

Mode

Description

Green

Power on

Blinking

System boot-up

Off

Power off or fail

Link/ACT:

LED Status

Mode

Description

Green

On/Blinking

1000Mbps

connected/data

transmitting

Amber

On/Blinking

10/100Mbps

connected/data

transmitting

Off

Disconnected or fail

PoE Max:

LED Status

Mode

Description

Green

PoE power output is over

120W PoE power budget

Off

PoE power output is

under 120W PoE power

budget

PoE:

LED Status

Mode

Description

Green

PoE power output is on

Off

PoE power output is off

SFP port:

LED Status

Mode

Description

Green

1000Mbps connected

Blinking

Data transmitting

Off

Disconnected or fail

I-4. Desktop Installation

Install the switch on a desktop by attaching the cushioning rubber

feet to the bottom corners of the switch to protect against

external vibration. Allow adequate space for ventilation between

the device and any objects around.

I-5. Rack-mounting Installation

The switch can be mounted in an EIA standard-sized 19-inch rack

that can be placed in a wiring closet with other equipment. To

install the switch, please follow these steps:

1. Attach the mounting brackets on the switch’s side panels

(one on each side) and secure them with the screws

provided.

Bracket Installation

2. Use the screws provided with the equipment rack to mount

the Switch on the rack and tighten it.

Rack Installation

Quick Setup

II-1. Switch to End Device

1. Connect the switch to local power with the included power

cable.

2. Use a standard Cat 5/5e Ethernet cable to connect the switch

to end devices as shown below. Switch ports will automatically

adjust to the link rate of the device to which it’s connected.

Optionally, any port can be used to uplink to an existing network.

Application Diagram

Gateway

VoIP

Phone

Camera

Access

Point

Switch

II-2. Login

1. Open a web browser and go to the switch’s IP address.

2. Enter the access point’s default IP address 192.168.169.1 into

the URL bar of a web browser.

3. You will be prompted for a username and password. Enter the

default username “admin” and the default password “admin”.

4. You will arrive at the switch configuration window as shown

below:

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment andreceiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

4. Consult the dealer or an experienced radio technician forhelp.

EMC Warning

This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Safety

1. This product is designed for indoor use only; DO NOT install the adapter outdoors.

2. DO NOT put this product at or near hot or humid places, e.g. kitchen or bathroom. DO NOT use

any spray or liquids on it.

3. DO NOT touch the product with wet hands and DO NOT clean the product with a wet cloth. Use a

soft, dry cloth to clean the device.

4. DO NOT expose the product to lit candles, cigarettes, open flames, high or low temperatures, etc.

5. DO NOT pull any connected cable with force; disconnect it from the power first.

6. Ensure proper ventilation, so that air flows freely around the product.

7. If you find that the product is not working properly, please contact your dealer of purchase and

ask for help. Do NOT open the casing

8. DO NOT disassemble the product, warranty will be void.

FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit

our online Product Webpage.

Your Device is Now Connected!

For more information:

YouTube: https://www.youtube.com/user/ComtrendConnection

Facebook: https://facebook.com/Comtrend

Website: http://us.comtrend.com/

Support: Visit our website or call (949) 753-9640

III

Supplier’s Declaration of Conformity

Company: Comtrend Corporation - North America

Address: 14 Chrysler, Irvine, CA, 92618

Certify and declare under our responsibility that the following equipment:

Product Name: 8-Port PoE Gigabit Ethernet Smart-Lite Switch

Model Name: GS-7608

Brand Name: COMTREND

Is tested with the declaration described above, and is in conformity with the relevant FCC (Federal

Communication Commission) standards, and technical specifications have been applied:

EMC:

47 CFR FCC Rules and Regulations Part 15 Subpart B, Class BDigital Device

Class B :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Notes:

15.19(a)(3) Regulations :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

Altri manuali per GS-7608

Indice

Altri manuali Comtrend Corporation Interruttore

Comtrend Corporation

Comtrend Corporation GS-7624 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7405 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7324 Manuale utente

Comtrend Corporation

Comtrend Corporation ES-7201PoE Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7408 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7526 Manuale utente

Comtrend Corporation

Comtrend Corporation PG-9182S4 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7620 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7405 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7424 Manuale utente

Comtrend Corporation

Comtrend Corporation ES-7211PoE Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7518 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7316 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7608 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7305 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7316 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7620 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7260 Manuale utente

Comtrend Corporation

Comtrend Corporation GS-7508 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente