Conceptronic C54NETCAM2 Manuale utente
Conceptronic
CNETCAM2 & C54NETCAM2
Network Camera
Advanced Installation Guide
&
So tware User Guide
Version 1.0
- 1 -
PREFACE
Thank you for purchasing the Conceptronic Network Camera, a powerful and
high-quality image wireless network camera. The camera can e installed as a
standalone system within your application environment easily and quickly, and
supports remote management function so that you can access and control it
using a We rowser on your PC.
This Advanced Installation Guide provides you with the instructions and
illustrations on how to use your camera, which includes:
Chapter 1 Introduction to Your Camera descri es the features of the camera.
You will also know the components and functions of the camera.
Chapter 2 Hardware Installation helps you install the camera according to
your application environment. You can use this camera at home, at
work, at any where you want.
Chapter 3 Accessing the Camera lets you start using your camera without
pro lem. The camera can e set up easily and work within your
network environment instantly.
Chapter 4 Con iguring the Camera guides you through the configuration of the
camera using the we rowser on your PC.
Chapter 5 Appendix provides the specification of the camera and some useful
information for using your camera.
Note: The illustrations and configuration values in this guide are for reference
only. The actual settings depend on your practical application of the
camera.
- 2 -
Contents
PREFACE ................................................... 1
INTR ODUCTION TO YOUR CAMERA ..................... 3
1.1 CHECKING THE PACKAGE CONTENTS ....................................... 3
1.2 GETTING TO KNOW YOUR CAMERA......................................... 4
1.3 FEATURES AND BENEFITS .................................................. 6
1.4 SYSTEM REQUIREMENT .................................................... 7
HARDWARE INSTALLATION .............................. 8
2.1 INSTALLING THE CAMERA STAND ........................................... 8
2.2 CONNECTING THE CAMERA TO LAN/WLAN................................ 9
2.3 APPLICATIONS OF THE CAMERA ...........................................10
ACCESSING THE CAMERA .............................. 11
3.1 USING IP FINDER ........................................................11
3.2 ACCESSING TO THE CAMERA ..............................................12
3.3 CONFIGURING THE IP ADDRESS OF THE PC ................................16
CONFIG URING THE C A MERA ........................... 17
4.1 USING THE WEB CONFIGURATION .........................................17
4.2 USING SMART WIZARD ...................................................19
4.3 BASIC SETUP ............................................................22
4.4 NETWORK SETTINGS .....................................................26
4.5 SETTING UP VIDEO .......................................................32
4.6 EVENT SERVER CONFIGURATION ..........................................34
4.7 MOTION DETECT .........................................................36
4.8 EVENT CONFIG ..........................................................37
4.9 TOOLS ..................................................................41
4.10 INFORMATION ............................................................43
SOFTWARE INSTALLATION ............................ 45
USING ULTRA VIEW..................................... 48
TO LAUNCH THE PROGRAM.......................................................48
ITEM FEATURES .................................................................49
TO ADD A CAMERA...............................................................53
TO REMOVE A CAMERA ...........................................................56
TO LINK TO THE WEB PAGE OF THE CAMERA ......................................56
TO RECORD VIDEO...............................................................57
TO CONFIGURE THE RECORDING SETTINGS ........................................59
TO PLAYBACK THE RECORDED VIDEO ..............................................61
TO SET UP MOTION DETECTION OPTIONS ..........................................62
INFORMATION ...................................................................64
APPENDIX ................................................ 65
A.1 SPECIFICATION ...........................................................65
A.2 GLOSSARY OF TERMS .....................................................67
A.3 GNU-GPL LICENSE INFORMATION ........................................75
- 3 -
CHAPTER 1
INTRODUCTION TO YOUR CAMERA
1.1 Checking the Package Contents
The following items should e present in the package of the Conceptronic
CNETCAM2 / C54NETCAM2:
•Conceptronic CNETCAM2 / C54NETCAM2 Network Camera Camera Stand
•Mounting screws with wall plugs for product stand
•Power supply (5V DC, 2.5A)
•Network ca le (RJ-45 type)
•Product CD-ROM
•Wireless antenna (only applies to the C54NETCAM2)
•This Quick Installation Guide
Note: Once any item contained is damaged or missing, contact the authorized
dealer of your locale.
- 4 -
1.2 Getting to Know Your Camera
Front View
C54NETCAM2
CNETCAM2
Description o the numbers
1. Adjusta le lens.
2. LEDs for ‘Power’ (top) and ‘Activity’ ( ottom).
1
2
1
2
- 5 -
Rear View
C54NETCAM2
CNETCAM2
Description o the numbers
1. LAN network connection port (RJ45).
2. Reset utton.
3. Power supply connector (5V DC, 2.5A).
4. Connector for camera stand.
5. Wireless antenna connector (only for C54NETCAM2).
6. Wireless antenna (only for C54NETCAM2).
3
4
1
5
6
4
3
2
1
2
- 6 -
1.3 Features and Bene its
Surveillance Supported
The camera supports “nightshot mode” to deliver clearer images in the
dark environment. Ena le motion detection and setup automated email
alerts and upload FTP for security.
Remote Control Supported
By using a standard We rowser or the undled Ultra View software
application, the administrator can easily change the configuration of the
camera via Intranet or Internet. In addition, the camera can e upgraded
remotely when a new firmware is availa le. The users are also allowed to
monitor the image and take snapshots via the network.
Multiple Plat orms Supported
The camera supports multiple network protocols, including TCP/IP, SMTP e-
mail, HTTP, and other Internet related protocols. Therefore, you can use
the camera in a mixed operating system environment, such as Windows
2000 and Windows XP.
Multiple Applications Supported
Through the remote access technology, you can use the cameras to monitor
various o jects and places for your own purposes.
For example, a ies at home, patients in the hospital, offices and anks,
and more. The camera can capture oth still images and video clips, so that
you can keep the archives and restore them at any time.
- 7 -
1.4 System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
WLAN: IEEE 802.11 /g.
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista
CPU: Intel Pentium III 350MHz or a ove
RAM: 128MB
Resolution: 800x600 or a ove
User Interface: Microsoft® Internet Explorer 6.0 or a ove
Apple Safari 2 or a ove
Mozilla Firefox 2.00 or a ove
Accessing the Camera using Ultra View
Platform: Microsoft® Windows® 2000/XP/Vista.
Hardware Requirement:
1 camera connected: Intel Pentium III 800MHz; 512MB RAM
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM
Resolution: 1024x768 or a ove
Note: If you connect multiple cameras to monitor various places simultaneously,
you are recommended to use a computer with higher performance.
- 8 -
CHAPTER 2
HARDWARE INSTALLATION
2.1 Installing the Camera Stand
The camera comes with a camera stand, which uses a swivel all screw head to
lock to the camera’s screw hole. When the camera stand is attached, you can
place the camera anywhere y mounting the camera through the three screw
holes located in the ase of the camera stand.
The Camera Stand
- 9 -
2.2 Connecting the Camera to LAN/WLAN
Use the provided Ethernet ca le
to connect the camera to your
local area network (LAN).
When you connect the AC power
adapter, the camera is powered
on automatically. You can verify
the power status from the Power
LED on the front panel of the
camera.
Once connected, the Link LED
starts flashing green light and the
camera is on stand y and ready
for use now.
C54NETCAM2 ONLY:
If you use a wireless network in
your application environment, you
need to attach the included
external antenna to the camera.
When the camera is powered on,
the camera will automatically
search any access point with
“de ault” SSID.
Note: If the camera cannot connect to your wireless network, you need to
install the camera in LAN and proceed with WLAN settings.
Connecting the Ethernet Cable
Connecting the External Antenna
(C54NETCAM2 Only)
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Conceptronic Telecamera IP
