Conhersa ET-1000 Manuale utente
ALL-TERRAIN ELECTRIC LIFTER ET-1000
USER’S MANUAL
Edition: December 2009
USER’S MANUAL
INDEX
1. MAIN COMPONENTS 1.1
2. SAFETY INSTRUCTIONS 2.1
3. CONTROL SWITCHES AND INDICATORS 3.1
4. SWITCH ON AND WORK 4.1
5. LOADING AND UNLOADING 5.1
6. SERVICE AND CARE 6.1
7. LONG WAREHOUSING 7.1
8. TECHNICAL SPECIFICATIONS 8.1
2008 CONHERSA
1.1
1. MAIN COMPONENTS
1. Chassis
2. Front wheels
3. Fork Grouping
4. Fence
5. Hydraulic Cylinder
6. Chains
7. Pulley
8. Electric braking
9. Motor drive wheel
10. Handle
1.2
11. Batteries
12. Batteries charger
13. Hydraulic pump
14. Main contactor
15. Electronic controller
16. Load indicator
17. Plug
18. Emergency stop
2.1
2. SAFETY INSTRUCTIONS
Etiquettes 2.2
All-terrain lifter: safety 2.4
Daily inspections 2.5
All-terrain lifter operator 2.9
Movement in ramps and special areas 2.10
All-terrain lifter transportation 2.12
Testing 2.13
Noise level 2.13
Dangerous environment 2.13
2.2
ETIQUETTES
2.3
WARNING
Do not stand on nor under the
forks.
WARNING
Keep hands, feet and body
away from masts and forks.
Danger of trapping betwee fix
and mobile parts.
CAUTIONS WHILE CHARGING
BATTERIES
1.Charge batteries at an open-air
area, away from flames, fumes
and sparks. Batteries’ gasses
may be explosives
2.Do not smoke around the
charging area.
3.Do not disconnect the
connector during the process of
charging. Danger of sparks.
2.4
ALL-TERRAIN LIFTER:
SAFETY
USE UNDER INSTRUCTIONS
The All-terrain Lifter may only be
used under instructions included
in this manual.
WARNING
This Lifter may only be used to
transport and placement of
charges and palletised
materials, as per the
instructions of this Manual.
WARNING
Should you wish to use it for
different purposes, you may
ask for CONHERSA’S
agreement and, if necessary,
your local authorities in order
to avoid risks.
WARNING
In case of malfunction, switch
off and contact our technical
service.
2.5
DAILY INSPECTIONS
Befote using, following
inspections shall be followed:
1.Brake: When releasing handle,
make sure that the machine is
restrained and you can not
move it.
2.Forks: Visual inspection. Verify
correct lift and descent. No
damage in forks.
3.Hydraulic circuit: Verify possible
looses (leaks) in pipe and
cylinder.
4.Wheels: Verify tyres state.
Tigthen bolts. Verify wheels
pressure.
5.Control instruments: Switch on
key. Verify batteries’ light
indicatiors lights on.
6.Bettery: Correct battery charge
level: >20%.
7.Horn: check..
8.Lifting: With forks unloaded,
verify correct lifting and
descent.
9.Travel: Pressing the death-
man, verify correct movement
forward and reverse.
10. Visual inspection of chains
and pulleys. Verify unloaded
that the stress is equal in both
chains.
WARNING
In case of malfunction, switch
off, inform to whom it may
concerní, and contact the
technical service.
BRAKE
When releasing handle, verify
that speed controller returns to
neutral position and brake is
inmediately actioned. A clicking
sound will be noticed.
Push the Lifter to make sure that
it is well braked and you can not
move it.
Indice
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
