prompt
Please read this safety rule carefully before use.
After the equipment has been transported to the destination of use, please carefully
open the package and take out the equipment. If you find any defects, you should
immediately contact the shipping company and complain according to the defect. Confirm
that this equipment is intact when it leaves the factory.
Please check whether the received equipment matches the goods registered in the
freightbill, and whether the goods registered in the freight bill match
The goods you ordered are consistent, if not, please contact your supplier immediately.
Overview
This lamp is a professional lighting equipment designed for indoor and outdoor
performances, etc. It is a professional special-effect background retro lamp. It must be
marked as a ground-level wire and ground wire.
Do not open the casing while this equipment is running to avoid electric shock.
Obvious defects are found in the glass lens, and the lens should be replaced
immediately and its power should be reduced, such as deep cracks or scratches. The
luminous body is damaged or distorted after high heat and should be replaced
immediately. If you need to perform inspection, maintenance, repairs and other
operations inside the lamp, you should turn it over to professionals.
In the event of an accident, unplug the power cord before opening the lamp housing.
The user should operate within the scope of the specified use of this equipment and check
whether the wiring of the equipment is correctly connected. Please do not place the lamp
in a changeable and harsh environment.
The manufacturer shall not be liable for damage caused by unauthorized replacement of
other types of light sources.
This luminaire is a kind of professional equipment. Although the improved design is
simpleand convenient to operate, it still needs professional installation and maintenance.
Point
The power cord and other connecting devices are very important to the equipment, and
their reasonable arrangement leads to the safe and convenient use of the equipment.
When unplugging and plugging in the power supply, you must hold the plug and pull it out.
Do not pull the power cord directly.
Do not use the power cord in harsh environments. It should be tested before installation,
and periodic testing should be maintained after installation. Do not tie the power cord
andother signal lines together to prevent confusion.
Power connection
This lamp adapts to the conventional voltage of various countries. For the safety of
users,be sure to keep the ground wire (yellow-green) grounded.
Warning: LETHAL VILTAGE PRESENT INSIDE
