Contec COM-4CX-USB Manuale utente

Serial I/O Unit for USB

First step guide

CONTEC CO., LTD.

Thank you for purchasing the CONTEC product. This product is a serial I/O unit corresponding to the

USB for performing serial communication with external devices.

Check, with the following list, that your package is complete. If you discover damaged or missing

items, contact your retailer.

Product Configuration List

- USB Unit …1 - Clamps for prevention of USB cable *1…1

- Disk [COM Setup Disk] …1 - First step guide (this booklet) …1

- USB Cable (1.8m) …1 - 3-pin Power connector *1*3…1

- USB Cable attachment …1 - Warranty Certificate…1

- Ferrite core (small size) *1 ...1 - Serial number label …1

- External toothed lock screw (M4 x 5) *2...1 - Rubber feet *2*3…4

- AC adapter *3 ...1 - AC cable (1.8m) *3 …1

- 5-pin connector for RS-422A/485 communication *3 ...4

*1 It is attached to COM-4CX-USB.

*2 It is attached to COM-4CN-USB.

*3 It is attached to COM-4PDHN-USB.

About an User’s Guide

The User’s Guide of this product is offered as the PDF file in the bundled Disk. With it, since

information such as a setup of hardware, connection (signal arrangement of a connector) with external

devices and product specification is indicated, please refer to it if needed.

It is possible to display a "User’s

Guide " from the automatic

starting screen of the bundled

Disk.

File storing place:

\UsersGuide

Adobe Reader is required in

order to read a description.

The reference place of the installation method

Information

Reference place

Installation by Windows Help files containing the methods to follow in performing installations

on different Windows operating systems are included on the bundled

disk, so refer to the files in the following folder.

\Usb\COM4CXUSB\ InstDoc

Serial I/O Unit First step guide

Product information

Visit the CONTEC’s Web site for more information on this product.

Inquiry

Contact your retailer.

Handling Precautions

- Do not strike or bend this product.

Otherwise, this may malfunction, overheat, cause a failure or breakage.

- Do not touch this product's terminals with your hands.

Otherwise, this may malfunction, overheat, or cause a failure.

If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.

- Do not close the ventilation hole(s) of this product by, for example, placing an object. This may

cause overheating, malfunction, and/or failure of the product.

- Power saving mode (standby mode) is not supported.

Otherwise, this may malfunction, overheat, cause a failure or breakage.

- Do not touch the external connector when the power is on.

Otherwise this may malfunction, overheat, cause a failure due to static electricity.

- Make sure that your PC can supply ample power to all this product connected.

Insufficiently energized products could malfunction, overheat, or cause a failure.

- Do not connect the device other than that of CONTEC’s USB to the USB port included on this

product. Otherwise, this may cause a failure or malfunction.*1

- When connecting multiple units with USB HUB function and set up them, do one at a time and

complete setup for the previous unit before starting to do the next unit. *1

- It may cause a trouble in recognizing and operating the device according to the kind of USB hub.

- The specifications of this product are subject to change without notice for enhancement and quality

improvement. *1

Even when using the product continuously, be sure to read the manual and understand the contents.

- Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting

from any modifying of this product.

- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever

(including damages for loss of business profits) arising out of the use or inability to use this

CONTEC product or the information contained herein.

*1 COM-4CX-USB only

CAUTION

Serial I/O Unit First step guide

Installing the Software

Although some user interfaces are different depending on the OS used, the basic procedure is the same.

Log on as administrator when installing.

< Installing the Drivers>

(1) Insert the Disk [COM Setup Disk] into your PC.

(2) Run [\USB\COM-4CX-USB\Setup.exe] from the

supplied Disk.

(3) Follow the instruction on the screen to proceed with

the installation.

You have now finished installing the software.

Installing the Hardware

(1) Load the Disk [COM Setup Disk] on your PC.

(2) Connect this product to the USB port on PC by the

USB cable.

(3) The "Found New Hardware Wizard" appears.

Select "Install the software automatically" and click

the "Next" button.

You have now finished installing the hardware.

Serial I/O Unit First step guide

CONTEC CO., LTD.October 2017 Edition

3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan

https://www.contec.com/

NA00881 (LYLT593)

10122017_rev3 [02152011]

No part of this document may be copied or reproduced in any form by any means without prior written

consent of CONTEC CO., LTD.

Initializing the Software

This assigns COM ports to the serial ports on the Unit. You can also change the COM port numbers

for existing COM ports.

- Start Device Manager

(1) Select "System" from "Control Panel" and start [Device Manager].

(2) Check that the new COM ports are

displayed in the [Ports] folder.

- Updating the Settings

(1) If you wish to change a port number,

open the properties page for the port

and click the [Advanced…] button

under [Port Settings].

(2) Use the [COM Port Number] combo

box to modify the COM port number.

You have now finished installing the initial setting of software.

* The name of the connected

product

you have just added is

displayed.

Altri manuali Contec Sistema I/O

Contec

Contec DIO-1616RYX-USB Manuale utente

Contec

Contec PIO-16H Manuale utente

Contec

Contec COM-1PDH-LPE Manuale utente

Contec

Contec N Series Manuale utente

Contec

Contec DIO-1616L-PE Manuale utente

Contec

Contec PIO-16 Manuale utente

Contec

Contec CCU-78F/25M Manuale utente

Contec

Contec PO-32L(PCI)H Manuale utente

Contec

Contec PIO-16/16T(PCI) Manuale utente

Contec

Contec DIO-1616RY-PE Manuale utente

Contec

Contec N Series Manuale utente

Contec

Contec PCI-bus Analog Input Multi-Function Board... Manuale utente

Contec

Contec AO-1604CI2-PCI Manuale utente

Contec

Contec N Series Manuale utente

Contec

Contec AIO-163202FX-USB Manuale utente

Contec

Contec COM-1C-LPE Manuale utente

Contec

Contec DAI16-4(USB) Manuale utente

Contec

Contec DIO-128SLX-USB Manuale utente

Contec

Contec DIO-48DX-USB Manuale utente

Contec

Contec POW150X Manuale utente

Contec

Contec PIO-16/16L(PC)V Manuale utente

Contec

Contec DIO-96D2-LPCI Manuale utente

Contec

Contec DIO-1616L-PE Manuale utente

Contec

Contec PIO-32H(PCI)H Manuale utente

Manuali Sistema I/O popolari di altre marche

WAGO

WAGO 750-344 Manuale utente

Teknim

Teknim TWM-1887 Manuale di istruzioni

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuale utente

BERGHOF

BERGHOF ECC DIO 16/16 Manuale di istruzioni

Advantech

Advantech PCM-27J3AU Manuale di installazione e funzionamento

Festo

Festo CP-E08-M12-CL Manuale utente

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuale utente

Hitachi

Hitachi HX-RIO3 Series Manuale utente

NUUO

NUUO SCB-A08 Manuale utente

M-system

M-system R3Y-RS8 Manuale utente

jablotron

jablotron JB-110N Manuale utente

Omron

Omron SYSMAC C200H Manuale utente

DOLD

DOLD SAFEMASTER M Manuale utente

ABB

ABB OPT-MF-001 Manuale utente

Omron

Omron SYSMAC C2000H Manuale utente

Helmholz

Helmholz TB20 Manuale utente

ICP DAS USA

ICP DAS USA tM-AD2 Manuale utente

Automationdirect.com

Automationdirect.com DL305 Manuale utente