Contex SD 3600 series Come usare

Technical Service Guide
for SD3600
FSM/TSG/001 (1.3)

Revision table
1.0 -> Original Issue of Document December 15th 2011 CDM
1.1 -> Review updates January 17th 2012 CDM
1.2 -> Error code list updated January 19th 2012 CDM
1.3 -> Spare Part list corrected May 16th 2012 CDM
ii

This document is the property of Contex A/S. The data contained herein, in whole or in part, may not be duplicated,
used or disclosed outside the Recipient for any purpose other than to conduct technical evaluation. This restric-
tion does not limit the Recipients right to use information contained in the data if it is obtained from another source
without restriction.
Document Title.: NA53A Technical Service Guide
Doc. No.: FSM/TSG/001
Prepared by.: CDM
Authorized by.: JR
Distribution.: Tegningsarkiv, Svendborg
Issue revision date.: 1.3 16 May 2012
Scanners covered by this Service Guide.:
NA52A - SD3600
iii

iv
Table of Contents
Introduction to CIS Technology 1-2
CIS Element Design������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 1-3
Design 2-6
Block Diagram���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2-7
Wiring Diagram��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2-8
Power Supply layout with measuring points (SMPS) ����������������������������������������������������������������������������������������������������������������������������������� 2-9
Keypad �������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2-9
Scanner Controller Board Layout (SULG)�������������������������������������������������������������������������������������������������������������������������������������������������� 2-10
CIS Unit Construction��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2-11
CIS Unit Construction��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2-11
Troubleshooting 3-2
Troubleshooting Sequence��������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3-3
Error codes displayed on Keypad ���������������������������������������������������������������������������������������������������������������������������������������������������������������� 3-4
Banding Problems���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3-5
Image Quality Problems������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3-5
Stitching Problems ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3-6
Part Replacement 4-8
Identifying parts������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 4-10
Part list ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-11
Power Supply (SMPS)�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-12
LHS Cover������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-13
Scanner Controller Board (SULG)�������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-14
Stepper Motor Assy� ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-16
Tacho Sensor ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-17
Paper and Lid Sensors������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-18
Complete CIS Unit�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-19
Power Entry Module����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-20
USB Cable�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-21
RHS Cover & Keypad�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-22
Damper for CIS Bridge������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 4-23
Pressure Rollers����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4-24
Appendix A A-1
WIDEsystem Service, walk though ��������������������������������������������������������������������������������������������������������������������������������������������������������������A-2
Appendix B B-1
Firmware Download, walk through���������������������������������������������������������������������������������������������������������������������������������������������������������������B-2

v
Erase Parameter block ��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� B-4
Appendix C C-1
Scanner Terms �����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������C-2
Appendix D D-1
Error Codes����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������D-2
Appendix E E-1
Scanner License system, General ����������������������������������������������������������������������������������������������������������������������������������������������������������������E-2
Main Board Replacement�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������E-3
Temporary Board switch���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������E-8
Problem with Activation ����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������E-8

vi

Introduction

1-2
Introduction
Introduction to CIS Technology
CIS Element
CIS Element Design
Focus
Light
Example of a CIS Element, Contact Image Sensor

1-3
Introduction
The CIS Element consist of 3 major parts: sensor, lens and light
source.
The Light source is 3 LEDs in RGB that are lit one at a time.
The sensor consists of 10368 individual monochrome sensors.
The purpose of the lens is to channel the light from the
“pixels” on the image to the sensors. There is no magni-
cation in the lens (1x1).
The LED’s ash one at a time, capturing one color at a
time.
Due to the very short focal length, the focus depth is
limited. The original has to be in contact with the surface
of the glass plate in order to be in focus.
CIS Element Design

1-4
Introduction
Altri manuali per SD 3600 series
1
Indice

















