Conviron BDR16 Manuale utente

BDR16 User Manual

287849-ENG

R00

October 2018 | 287849-ENG R00 i

BDR16 User Manual

Please read these instructions carefully and

completely before operating the chamber.

Conviron Document Number 287849-ENG, Revision 00

Published by:

CONVIRON 590 Berry Street

Winnipeg, Manitoba

Canada, R3H 0R9

www.conviron.com

October 2018

Printed in Canada

2018 Controlled Environments Limited

Conviron is a registered trademark of Controlled Environments Limited. All other trademarks are the property of their

respective owners. Information subject to change without written notice.

ii October 2018 | 287849-ENG, R00

PREFACE

Welcome to the BDR16 User Manual. This manual describes the features and use of Conviron’s

BDR16 chamber and is written in a straightforward and minimally technical style.

This manual is designed to provide sufficient detail for the different configurations, including a

structured format that provides step-by-step instructions. Clients will find sufficient detail for a

typical installation including figures, diagrams, and graphics to operate the chamber without issue.

However, given that many installations are specific to each facility and that facilities may have

unique requirements, additional information or assistance from Conviron may be required.

This equipment is only to be used by authorized personnel - that is, personnel who have been

trained in the proper use of the equipment and who have read this manual.

Functional Description/Intended Use

This chamber is designed to provide a controlled environment for plant production and scientific

experiments including, but not limited to, plant science, biotechnology, and entomology.

October 2018 | 287849-ENG R00 iii

WEEE and RoHS Compliance Statements

CONVIRON is committed to meeting all requirements of the WEEE directive (2012/19/EU).

Products labeled with the WEEE symbol (a crossed out “waste

bin”) indicate that the final user should not discard this product

along with other household waste, but that it must be collected

and treated separately.

Please contact Conviron, or your Conviron distributor, for proper handling and disposal

instructions.

Conviron is committed to meeting all requirements of the RoHS directive (2011/65/EU). The RoHS

directive requires that manufacturers eliminate or minimize the use of lead, mercury, hexavalent

chromium, cadmium, polybromated biphenyls, and polybromated biphenyl ethers in electrical and

electronic equipment sold in the EU after July 1, 2006.

Document Conventions

Conviron maintains a policy of continual improvement and reserves the right to change the product

without prior notice. Therefore, the images used throughout this manual may differ slightly from the

actual configuration due to updates and product changes.

Wherever possible, textual descriptions are accompanied by photographs or line

drawings of the chambers to assist the reader in understanding the material.

Frequent reference is made to left and right sides throughout this manual. Left is

considered to be the left hand side while facing the equipment.

The “PLEASE NOTE” symbol is used to draw attention to additional information

which may assist in the operation of the equipment.

iv October 2018 | 287849-ENG, R00

SERVICE & TECHNICAL SUPPORT

Before contacting Conviron, please check the following:

Read this document and the accompanying controller manual in its entirety before

attempting to operate the chamber.

If you are having a problem using your cabinet(s), pay particular attention to the relevant

section and the pertinent information in this manual, and use the information to diagnose

and correct the problem.

If the problem persists and/or you require additional assistance please collect the

following information prior to contacting Conviron:

The serial number of the cabinet, located on the rating plate.

The software version of the control system. Instructions for obtaining the software

version of your control system are provided in the control system operator manual.

A description of the problem.

A description of what you were doing before the problem occurred.

Head Office

Technical Services

Conviron

590 Berry St.

Winnipeg, Manitoba,

Canada R3H 0R9

Conviron Technical Services

Please visit www.conviron.com for global service contact information.

October 2018 | 287849-ENG R00 v

CONTENTS

1PRECAUTIONS......................................................................................................................................8

1.1 Hazard Identification Symbols .......................................................................................................8

1.2 General...........................................................................................................................................9

2CHAMBER FEATURES .......................................................................................................................11

2.1 Control System.............................................................................................................................11

2.2 Airflow...........................................................................................................................................11

2.3 Ventilation ....................................................................................................................................11

2.4 Barrier Canopy.............................................................................................................................11

2.5 Instrument Ports...........................................................................................................................12

2.6 Communications ..........................................................................................................................12

2.7 Levelers........................................................................................................................................12

2.8 Central Management System ......................................................................................................12

3PROVIDE ELECTRICAL SERVICE TO CHAMBER............................................................................13

4START UP ............................................................................................................................................15

4.1 Power ON.....................................................................................................................................15

4.1.1 Starting a Chamber with DX Systems..........................................................................15

4.1.2 Starting a Chamber with Direct Cooled (GLY) Systems ..............................................17

5OPERATION.........................................................................................................................................19

5.1 Fluorescent and Incandescent Combination Lighting..................................................................19

5.2 Plant Placement...........................................................................................................................19

5.2.1 Unifloor®.......................................................................................................................20

5.2.2 Wire Shelves ................................................................................................................20

5.3 Instrument Ports...........................................................................................................................21

5.4 Fresh Air Inlet and Exhaust Port..................................................................................................22

5.5 Fan Speed Control.......................................................................................................................22

5.6 Airflow...........................................................................................................................................23

5.7 CO2Control..................................................................................................................................23

5.8 Aspirator.......................................................................................................................................24

5.9 Lighting Options ...........................................................................................................................25

5.9.1 Fluorescent Lighting.....................................................................................................25

5.9.2 LED Lighting.................................................................................................................25

vi October 2018 | 287849-ENG, R00

5.9.3 Closed Loop Dimmable Lighting System .....................................................................26

5.10 Additive Humidification.................................................................................................................26

5.10.1 Air-assisted Spray Nozzle Humidification (ASNH).......................................................26

5.10.2 Ultrasonic Humidification System (USH)......................................................................27

5.10.3 Bypass Dehumidification..............................................................................................27

5.11 Additive Carbon Dioxide Control..................................................................................................28

5.11.1 Setting up the Additive CO2Control.............................................................................28

5.11.2 Adjusting the CO2Control ............................................................................................29

5.11.3 CO2Scrubber ...............................................................................................................30

5.12 Central Management System ......................................................................................................30

5.13 Shutdown .....................................................................................................................................30

6ADDITIONAL INFORMATION..............................................................................................................31

6.1 Terms & Definitions......................................................................................................................31

6.2 Product Updates ..........................................................................................................................32

6.3 Disposal .......................................................................................................................................32

October 2018 | 287849-ENG R00 vii

LIST OF FIGURES

Figure 3-1: Minimum Circuit Ampacity on Rating Plate .......................................................................13

Figure 3-2: Wiring Connection Order...................................................................................................14

Figure 5-1: Fluorescent and Incandescent Lamp Combination...........................................................25

Figure 5-2: Unifloor ..............................................................................................................................20

Figure 5-3: Instrument Port Locations..................................................................................................21

Figure 5-4: Fresh Air Inlet and Exhaust Port Location.........................................................................22

Figure 5-5: Inlet/Exhaust Port Close-up...............................................................................................22

Figure 5-6 BDR16 Air Flow.................................................................................................................23

Figure 5-7 Aspirator ............................................................................................................................24

LIST OF TABLES

Table 1-1 Hazard Identification Symbols.............................................................................................8

Table 6-1 Terms and Definitions........................................................................................................31

Precautions

8 October 2018 | 287849-ENG, R00

1 PRECAUTIONS

The equipment is intended to be installed, operated, maintained, and serviced only by trained

personnel, following the instructions and precautions described in the manuals provided by

Conviron.

The following precautions are intended to help guide users in the safe operation of Conviron

chambers.

1.1 Hazard Identification Symbols

Table 1-1 Hazard Identification Symbols

Symbol

Description

The “HAZARD WARNING” symbol is used whenever a hazard exists which

could cause personal injury or potential equipment damage, and requires

correct procedures/practices for prevention.

The “IMPORTANT INFORMATION” symbol is used to identify operating

procedures which must be followed to ensure smooth and efficient equipment

operation.

The “ELECTRICAL SHOCK/ELECTROCUTION” symbol is used to identify a

source of potentially dangerous electrical current.

The “ELECTROSTATIC DISCHARGE” symbol is used to identify equipment

which is sensitive to electrostatic discharge.

The “BURN HAZARD/HOT SURFACE” symbol is used to identify surfaces

which are hot enough to cause personal injury.

The “SLIPPERY SURFACE” symbol is used to identify a potential hazard

caused by a slippery surface.

The “ROTATING FAN BLADES” symbol is used to identify a potential hazard

from spinning fans inside the machine compartment.

The “HAND CRUSH/FORCE FROM BELOW” symbol is used to identify a

potential hazard from moving parts inside the chamber.

Indice

Altri manuali Conviron Attrezzature da laboratorio

Conviron

Conviron GEN1000-GE Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente

Yamato

Yamato BM510 Manuale utente