COOLIFE H8201 Manuale utente
Contents
English..............1-28
Deutsch...........30-58
Francais...........60-88
Español..........90-118
Italiano.........120-148
1 .Introduction
1.1. After sales service .......................................................01
1.2. Trail camera working principle ................................02
1.3. Warning .......................................................................02
1.4. Camera overview ........................................................05
1.5. Trail camera operation process .................................06
1.6. Explanation of camera screen pictures .....................07
1.7. Specification .................................................................08
2 . Preparing the Camera
2.1.Opening and closing the camera ...................................09
2.2. Inserting the batteries ...................................................09
2.3. Inserting the memory card ...........................................10
2.4. External power supply ..................................................11
2.5. Assembly with strap ......................................................12
2.6. Using the wall mount/bracket ......................................13
2.7. Install the trail camera properly ..................................15
2.8. How to use the cable ......................................................16
3. Basic Operation
3.1. Turn TEST, On And Off to the Camera ......................19
3.2. Adjust the best way of installation in Test mode .........19
4. Setup Menu and Functions .............................................21
5. FAQ ...............................................................................28
Introduction
1
1 .Introduction
1.1.After sales service
Choose us! We provide you with the best products and services, and
always focuses on professional brands.
We are committed to sincere and thoughtful service to ensure customer
satisfaction. If you have any questions or problems about our products,
please be free to contact us by email: support@coolife.site
We will reply you within 24 hours and provide you with a 100%
perfect solution.
If you want to learn more about the following information, you can
go to our website (www.coolifeeu.com)to view
■ Beginner tutorial
■ Download the manuals for different models
■ Get new product information
■ FAQ (Frequently Asked Questions and Answers)
■ Make suggestions or complaints about the products
■ Product operation video
Introduction
2
1.2. Trail camera working principle
The working principle of the trail camera is that the infrared sensor
triggers to take photos. In fact, when the heating body (animal, etc.)
enters the infrared sensing area of the trail camera, the sensing module
of the trail camera will start the camera to complete the capture,
thereby obtaining photos and videos. If the heating body (animal, etc.)
leaves the infrared sensing area, the trail camera is in a dormant
standby state, for example, the trail camera starts to capture again when
it enters the infrared sensing area again.
Application
■ Trail camera for hunting
■ Animal or event observation Motion-triggered security camera, for
home, office and community
■ All other indoor/outdoor surveillance where invasion evidence
needed
1.3. Warning
■ The H8201 hunting camera uses IR LEDs with a wavelength of
850nm, which emits a faint red light at night. But most animals cannot
see this infrared light and will not interfere with the animals.
■ When the ambient light source is unstable, the filter inside the
camera will be triggered to work, and then there will be a clicking
sound accompanied by screen flickering, which is normal.
Introduction
3
■ It is recommended to use high-performance alkaline batteries, which
can prolong the use time of the camera. It is not recommended to use a
1.2V rechargeable battery, because the working voltage of the hunting
camera is 1.5V. If the battery voltage is insufficient, it will not properly
work, and the battery may be exhausted after working for few hours
(the camera will show that the battery is low).
■ When using the hunting camera for the first time, please format the
memory card before using.
■ When installing the battery, please make sure to install the battery
normally, if the battery is installed upside down, it will cause the
camera to short circuit and burn out. Please note that the camera is not
protected by the short circuit!
■ When using the product for the first time, please remove the layer of
protective film on the lens and on the sensor of the product.
■ Do not damage the surface of the product sensor, if there is any
scratch or damage, it will affect the normal triggering of the camera.
■ Field installation: please make sure that the buckle of the camera and
the bottom DC plug are all closed and sealed, otherwise the camera
could be damaged in case of rain.
■ Do not use the mini USB data cable to charge the camera or charge
the rechargeable battery, it will seriously damage the camera.
■ Please keep the camera lens and infrared sensing windows clean. If
dirty, clean with the soft glasses cloth.
Introduction
4
■ For keeping the good waterproof and dustproof properties, please
keep the battery compartment sealing ring clean.
■ Do not touch the LCD display screen, camera lens, infrared sensing
windows and IR led glasses with hands or any sharp objects.
■ In case of low battery charge, please replace all the batteries on
time to avoid leakage of the electrolyte that could damage the camera.
If you want to know more information, please go to our
website(www.coolifeeu.com) to view or directly scan the QR code
to view.
Introduction
5
Parts Of The Camera
1.Display Screen
2.Up/Video Button
3.Shot Button
4.Right Button
5.OK Button
6.Speaker
7.Menu Button
8.Left Button
9.Playback Button
10.Down/Photo Button
11.Micro SD Card Slot
12.AV Jack
13.USB Jack
14.OFF-TEST-ON
Mode Button
15.Infrared LEDs
16.Day Camera
17.Front Motion Sensor
18.Side Motion Sensor
19.Status Indicator
20.Night Camera
Introduction
6
1.5. Trail camera operation process
Indice
Altri manuali COOLIFE Telecamera da ricognizione
