Craftsman 919.153160 Manuale utente

Owner's Manual

ICRAFTSMFINI

Permanently Lubricated

Tank Mounted

AiR COMPRESSOR

=Safety Guidelines

=Assembly

=Operation

=Maintenance

=Service and Adjustments

=Troubleshooting

=Repair Parts

CAUTION; Read the Safety Guidelines

and All Instructions Carefully Before

Operating.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Visit our Craftsman website: www.sears.com/craftsman

1000002888 R_v.0 6/18/07

WARRANTY ................................................ 2

SPECiFiCATiON CHART ...................................... 3

SAFETY GUiDELiNES =DEFiNiTiONS ........................... 3

iMPORTANT SAFETY iNSTRUCTiONS ........................ 3-9

GLOSSARY ................................................ 9

ACCESSORIES ............................................. 9

DUTY CYCLE ............................................... 9

ASSEMBLY ............................................... 10

iNSTALLATiON ......................................... 10-11

OPERATION ............................................ 12-14

MAINTENANCE ......................................... 14-15

SERVICE AND ADJUSTMENTS ............................ 15-16

STORAGE ................................................ 16

TROUBLESHOOTING .................................... 17-19

REPAIR PARTS ......................................... 20-23

ESPANOL .............................................. 24-41

REPAIR PROTECTION AGREEMENT ........................... 43

NOW TO ORDER REPAIR PARTS ...................... back cover

ONE YEAR FULL WARRANTY

Ifthis product fails due to a defect in material or workmanship within one year

from the date of purchase, Sears will at its option repair or replace it free of

charge. Contact Sears at 1-800-4-MY-HOME ®to arrange for repair, or return it

to the place of purchase for replacement.

Ifthis product is used for commercial or rental purposes, this warranty applies

for only ninety days from the date of purchase.

This warranty gives you specific legal rights and you may have other rights

which vary from state to state.

Sears, Roebuck and Co., Dept. 817WA, Noffman Estates, IL 60179

1000002888 2-ENG

Model No. "919.153160

Running HP 0.8

Bore 1-7/8"

Stroke 1-1/4"

Voltage-Single Phase 120V

Minimum Branch Circuit Requirement 10 amps

Fuse Type Time Delay

Air Tank Capacity 6 gallon

Approx. Cut-In 120 PSI

Approx. Cut-out 150 PSI

SCFM @ 40 PSIG *3.7

SCFM @ 90 PSIG *2.6

*Tested per ISO 1217

Refer to Glossary for abbreviations.

This manual contains information that is important for you to know and under-

stand. This information relates to protecting YOUR SAFETY and PREVENTING

EQUIPMENT PROBLEMS. To help you recognize this information, we use the

symbols below. Please read the manual and pay attention to these symbols.

_ Indicates an

imminently hazardous

situation which, if not avoided, will

result in death or serious inius.y.

_ Indicates a potentially

hazardous situation

which, if not avoided, could result in

death or serious iniurv.

_ Indicates a potentially

hazardous situation

which, if not avoided, _ result in

minor or moderate injur_L

_Used without the

safety alert symbol

indicates a potentially hazardous

situation which, if not avoided, may

result in property damage.

_Some dust created by power sanding, sawing, grinding,

drilling, and other construction activities contains

chemicals known to the State of California to cause cancer, birth defects

or other reproductive harm. Some example of these chemicals are:

•lead from lead-based paints

• crystalline silica from bricks and cement and other masonry products

® arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in awell

ventilated area, and work with approved safety equipment, always wear

OSNA/MSNA/NIOSN approved, properly fitting face mask or respirator

when using such tools.

When using air tools, basic safety precautions should always be followed

to reduce the risk of personal injury.

_This product contains chemicals, known to the State of

California to cause cancer, and birth defects or other

reproductive harm. Wash hands after handling.

3-ENG 1000002888

_Do not operate this unit until you read and _

understand this instruction manual for safety,

operation and maintenance instructions.

SAVE THESE iNSTRUCTiONS

_ RISK OF EXPLOSION OR FiRE

NOW TO PREVENT iT

••Always operate the compressor in a

well ventilated area free of combus-

tible materials, gasoline, or solvent

vapors.

WHAT CAN HAPPEN

It is normal for electrical contacts

within the motor and pressure

switch to spark.

If electrical sparks from compressor

come into contact with flammable

vapors, they may ignite, causing fire

or explosion.

Restricting any of the compressor

ventilation openings will cause seri-

ous overheating and could cause

fire.

Unattended operation of this prod- •

uct could result in personal injury

or property damage. To reduce the

risk of fire, do not allow the com-

pressor to operate unattended.

Ifspraying flammable materials,

locate compressor at least 20 feet

(6.1 m) away from spray area. An

additional length of air hose may be

required.

Store flammable materials in a

secure location away from com-

pressor.

Never place objects against or on

top of compressor.

Operate compressor in an open

area at least 12" (30.5 cm) away

from any wall or obstruction that

would restrict the flow of fresh air to

the ventilation openings.

Operate compressor in a clean, dry

well ventilated area. Do not operate

unit indoors or in any confined area.

Always remain in attendance with

the product when it is operating.

Always turn off and unplug unit

when not in use.

1000002888 4-ENG

__ RISK TO BREATHING (ASPHYXiATiON)

HOW TO PREVENT iT

= Air obtained directly from the com-

pressor should never be used to

supply air for human consumption.

Inorder to use air produced by this

compressor for breathing, suitable

filters and in-line safety equipment

must be properly installed. In-line

filters and safety equipment used

in conjunction with the compressor

must be capable dtreating air to all

applicable local and federal codes

prior to human consumption.

• Sprayed materials such as paint, Work in an area with good cross

paint solvents, paint remover, insec- ventilation. Read and follow the

ticides, weed killers, may contain safety instructions provided on the

harmful vapors and poisons, label or safety data sheets for the

materials you are spraying. Always

use certified safety equipment:

OSHA!MSHA!NIOSH respiratory

protection designed for use with

your specific application.

_ D D

RiSKorBURSTING

WHAT CAN HAPPEN

The compressed air directly from

your compressor is not safe for

breathing. The air stream may con-

tain carbon monoxide, toxic vapors,

or solid particles from the air tank.

Breathing these contaminants can

cause serious injury or death.

Air Tank: The air tank on your Air Compressor is designed and may be UM coded

(for units with air tanks greater than 6" (122 mm) diameter) according to ASME

Section VIII, Div. 1 rules. All pressure vessels should be inspected once every two

years. To find your state pressure vessels inspector, look under the Division of Labor

and Industriesin the government section of a phone book.

The following conditions could lead to a weakening of the air tank, and result in a

violent air tank explosion:

WHAT CAN HAPPEN ,,

Failure to properly drain condensed

water from air tank, causing rust

and thinning of the steel air tank.

HOW TO PREVENT iT

Drain air tank daily or after each

use. If air tank develops a leak,

replace it immediately with a

new air tank or replace the entire

compressor.

5-ENG 1000002888

• Modifications or attempted repairs

to the air tank.

Unauthorized modifications to

the safety valve or any other

components which control air tank

pressure.

Attachments & accessories:

Exceeding the pressure rating of

air tools, spray guns, air operated

accessories, tires, and other

inflatables can cause them to

explode or fly apart, and could

result in serious injury.

Over inflation of tires could result in

serious injury and property damage.

Never drill into, weld, or make any

modifications to the air tank or its

attachments. Never attempt to

repair a damaged or leaking air

tank. Replace with a new air tank.

The air tank is designed to

withstand specific operating

pressures. Never make adjustments

or parts substitutions to alter the

factory set operating pressures.

Follow the equipment

manufacturers recommendation

and never exceed the maximum

allowable pressure rating of

attachments. Never use compressor

to inflate small low pressure objects

such as children's toys, footballs,

basketballs, etc.

Use a tire pressure gauge to check

the tires pressure before each use

and while inflating tires; see the tire

sidewall for the correct tire pressure.

NOTE: Air tanks, compressors and simi-

lar equipment used to inflate tires can fill

small tires similar to these very rapidly.

Adjust pressure regulator on air supply to

no more than the rating of the tire pres-

sure. Add air in small increments and fre-

quently use the tire gauge to prevent over

inflation.

[__ RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN

Your air compressor is powered by

electricity. Like any other electrically

powered device, If it is not used

properly it may cause electric

shock.

•Repairs attempted by unqualified

personnel can result in serious

injury or death by electrocution.

HOW TO PREVENT IT

Never operate the compressor

outdoors when it is raining or in wet

conditions.

Never operate compressor with

protective covers removed or

damaged.

Any electrical wiring or repairs

required on this product should be

performed by authorized service

center personnel in accordance with

national and local electrical codes.

1000002888 6-ENG

•Electrical Grounding: Failure to Make certain that the electrical

provide adequate grounding to circuit to which the compressor

this product could result in serious is connected provides proper

injury or death from electrocution, electrical grounding, correct voltage

Refer to "Grounding Instructions" and adequate fuse protection.

paragraph in the "Installation"

section.

•w mD

__ RiSK FROM FLYING OBJECTS

WHAT CAN HAPPEN J HOW TO PREVENT iT

oThe compressed air stream can J•Always wear certified safety equip-

cause soft tissue damage to J merit: ANSi Z87.1 eye protection

exposed skin and can propel dirt, J (CAN/CSA Z94.3) with side shields

chips, loose particles, and small when using the compressor.

objects at high speed, resulting in J• Never point any nozzle or sprayer

property damage or personal injury, toward any part of the body or at

other people or animals.

Always turn the compressor off

and bleed pressure from the air

hose and air tank before attempt-

ing maintenance, attaching tools or

accessor es.

RiSKOFHOTSURFACES

WHAT CAN HAPPEN HOW TO PREVENT IT

Touching exposed metal such as Never touch any exposed metal

the compressor head, engine head, parts on compressor during or

engine exhaust or outlet tubes, can immediately after operation.

result in serious burns. Compressor will remain hot for

several minutes after operation.

Do not reach around protective

shrouds or attempt maintenance

until unit has been allowed to cool.

_r_ _RISKFROMMOVINGPARTS

WHAT CAN HAPPEN

Moving parts such as the pulley, fly-

wheel, and belt can cause serious

injury if they come into contact with

you or your clothing.

HOW TO PREVENT iT

Never operate the compressor with

guards or covers which are dam-

aged or removed.

Keep your hair, clothing, and gloves

away from moving parts. Loose

clothes, jewelry, or long hair can be

caught in moving parts.

Air vents may cover moving parts

and should be avoided as well.

7-ENG 1000002888

• Attempting to operate compressor Any repairs required on this product

with damaged or missing parts or should be performed by authorized

attempting to repair compressor service center personnel.

with protective shrouds removed

can expose you to moving parts

and can result in serious injury.

__ RISK OF UNSAFE OPERATION

WHAT CAN HAPPEN HOW TO PREVENT iT

= Unsafe operation of your air com- Review and understand all instruc-

pressor could lead to serious injury tions and warnings in this manual.

or death to you or others. Become familiar with the operation

and controls dthe air compressor.

Keep operating area clear of all per-

sons, pets, and obstacles.

Keep children away from the air

compressor at all times.

Do not operate the product when

fatigued or under the influence of

alcohol or drugs. Stay alert at all

times.

Never defeat the safety features of

this product.

Equip area doperation with a fire

extinguisher.

Do not operate machine with miss-

ing, broken, or unauthorized parts.

_ D D

__ RISK OF FALLING

WHAT CAN HAPPEN HOW TO PREVENT IT

••

A portable compressor can fall

from a table, workbench, or roof

causing damage to the compres-

sor and could result in serious

injury or death to the operator.

Always operate compressor in a

stable secure position to prevent

accidental movement of the unit.

Never operate compressor on a

roof or other elevated position.

Use additional air hose to reach

high locations.

1000002888 8-ENG

RiSK FROM NOISE

WHAT CAN HAPPEN • HOW TO PREVENT iT

Under some conditions and dura- Always wear certified safety equip-

tion of use, noise from this product merit: ANSI $12.6 ($3.19) hearing

may contribute to hearing loss. protection.

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

Become familiar with these terms

before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per min-

ute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge;

a unit of measure of pressure.

Code Certification: Products that

bear one or more of the following

marks: UL, CUL, ETL, CETL, have

been evaluated by OSHA certified

independent safety laboratories and

meet the applicable Underwriters

Laboratories Standards for Safety.

Cut-in Pressure: While the motor

is off, air tank pressure drops as you

continue to use your accessory. When

the tank pressure drops to a certain

low level the motor will restart auto-

matically. The low pressure at which

the motor automatically restarts is

called "cut-in" pressure.

Cut-Out Pressure: When an air com-

pressor is turned on and begins to

run, air pressure in the air tank begins

to build. It builds to a certain high

pressure before the motor automati-

cally shuts off, protecting your air tank

from pressure higher than its capacity.

The high pressure at which the motor

shuts off is called "cut-out" pressure.

Branch Circuit: Circuit carrying elec-

tricity from electrical panel to outlet.

This unit is capable of powering the following accessories. The accessories are

available through the current Power and Hand Tool Catalog or full-line Sears

stores.

Accessories

• In Line Filter

Tire Air Chuck

Quick Connector Sets

(various sizes)

Air Pressure Regulators

Oil Fog Lubricators

Air Hose: 1/4", 3/8" or 1/2" I.D. in

various lengths

Refer to the selection chart located on

the unit to select the tools this unit is

capable of powering.

The use of any

--- other accessory

not recommended for use with

this tool could be hazardous. Use

only accessories rated equal to

or higher than the rating of the air

compressor.

This air compressor pump is capable average duty cycle be maintained;

of running continuously. However, to that is, the air compressor pump

prolong the life of your air compressor, should not run more than 30-45

it is recommended that a 50%-75% minutes in any given hour.

9-ENG 1000002888

Unpacking

1. Remove unit from carton and discard all packaging.

HOW TO SET UP YOUR UNIT

Location of the Air Compressor

• Locate the air compressor in a

clean, dry and well ventilated

area.

The air compressor should be

located at least 12" (30.5 cm)

away from the wall or other

obstructions that will interfere

with the flow of air.

"The air compressor pump and

shroud are designed to allow for

proper cooling. The ventilation

openings on the compressor are

necessary to maintain proper

operating temperature. Do not

place rags or other containers on

or near these openings.

GROUNDING INSTRUCTIONS

_Risk of Electrical

Shock. In the event

of a short circuit, grounding reduces

the risk of shock by providing an

escape wire for the electric current.

This air compressor must be

properly grounded.

The portable air compressor is

equipped with a cord having a

grounding wire with an appropriate

grounding plug (see following

illustrations).

1. The cord set and plug with this

unit contains a grounding pin.

This plug MUST be used with a

grounded outlet.

iMPORTANT: The outlet being used

must be installed and grounded in

accordance with all local codes and

ordinances.

2, Make sure the outlet being used

has the same configuration as the

grounded plug. DO NOT USE AN

ADAPTER. See illustration.

_:_ Grounded

Outlets

Grounding Pin

3. Inspect the plug and cord before

each use. Do not use if there are

signs of damage.

4. If these grounding instructions are

not completely understood, or if in

doubt as to whether the compres-

sor is properly grounded, have the

installation checked by a qualified

electrician.

_Risk of Electrical

Shock. IMPROPER

GROUNDING CAN RESULT IN

ELECTRICAL SHOCK.

Do not modify the plug provided, if

it does not fit the available outlet, a

correct outlet should be installed by

a qualified electrician.

Repairs to the cord set or plug

MUST be made by a qualified elec-

trician.

1000002888 10-ENG

Indice

Lingue:

Altri manuali Craftsman compressore d'aria

Craftsman

Craftsman CMXECXA0220242 Manuale utente

Craftsman

Craftsman AIR COMPRESSOR 919.724701 Manuale utente

Craftsman

Craftsman 919.184193 Manuale utente

Craftsman

Craftsman 919.165382 Manuale utente

Craftsman

Craftsman 921.166420 Manuale utente

Craftsman

Craftsman 919.167220 Manuale utente

Craftsman

Craftsman 919.167782 Manuale utente

Craftsman

Craftsman 919.152141 Manuale utente

Craftsman

Craftsman 919.166441 Manuale utente

Craftsman

Craftsman 919.167361 Manuale utente

Craftsman

Craftsman 919.165610 Operators Manuale utente

Craftsman

Craftsman 16636 - 5 Gal. Air Compressor Manuale utente

Craftsman

Craftsman 390.291352 Manuale utente

Craftsman

Craftsman Air compressor Manuale utente

Craftsman

Craftsman 919.167342 Manuale utente

Craftsman

Craftsman 919.152145 Manuale utente

Craftsman

Craftsman 919.727320 Manuale utente

Craftsman

Craftsman CMEC6150 Manuale utente

Craftsman

Craftsman 919.165190 Manuale utente

Craftsman

Craftsman 919.167311 Manuale utente

Craftsman

Craftsman 921.166370 Manuale utente

Craftsman

Craftsman 919.167342 Manuale utente

Craftsman

Craftsman 919.165281 Manuale utente

Craftsman

Craftsman 919.153090 Manuale utente

Manuali compressore d'aria popolari di altre marche

Sparmax

Sparmax DC-25XR Manuale utente

KAESER

KAESER M122 Manuale utente

GMC

GMC GAC1500 Manuale utente

Briggs & Stratton

Briggs & Stratton Air Compressor Manuale utente

Fini

Fini F3GST2TK Manuale utente

Industrial Air

Industrial Air CP1580325 Manuale di programmazione

Campbell Hausfeld

Campbell Hausfeld RP3300 Guida rapida

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuale utente

Hitachi

Hitachi EC99S Manuale dell'operatore

Parkside

Parkside PKO 270 A1 Manuale utente

Sullair

Sullair 185 Manuale utente

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuale utente

Ferm

Ferm CRM1046 Manuale utente

BE AC153 Manuale utente

RIDGID

RIDGID OF25150A Manuale utente

Johnson Controls

Johnson Controls QUANTUM LX Manuale

Sears

Sears Craftsman 919.167463 Manuale utente

Ring Automotive

Ring Automotive RAC700 Manuale utente