Crestron DM-TX-200-C-2G Manuale utente

The Crestron® DM-TX-200-C-2G is a DigitalMedia 8G+® transmitter that

provides a remote wall plate or floor box input connection for HDMI® and

VGA sources as part of a complete DigitalMedia™ System. It includes a

USB HID device port, allowing a mouse/keyboard to be connected for

controlling a computer or other host device at a different location. The

DM-TX-200-C-2G mounts in a double-gang electrical box.

In the Box

1 DM-TX-200-C-2G,

Wall Plate DigitalMedia 8G+ Transmitter 200

Additional Items

4 Screw, #6-32 x 3/4 in., Truss Head, Combo (2009211)

Connect the Rear Panel

Connect the rear panel of the transmitter before installing the unit into

an electrical box (not included) or floor box (not included).

NOTE: The DM OUT port is a Power over DM (PoDM) and HDBaseT®

PoE (Power over Ethernet) powered device (PD) port. To receive PoDM

or HDBaseT PoE, the DM-TX-200-C-2G requires a connection to a

DigitalMedia switcher or other equipment that has a PoDM or

HDBaseT PoE power sourcing equipment (PSE) port. Any wiring

connected to a PoDM or HDBaseT PoE PSE port is for intrabuilding

use only and should not be connected to a line that runs outside of the

building in which the PSE is located.

DM-TX-200-C-2G QuickStart

Wall Plate DigitalMedia 8G+® Transmitter 200

Install the Transmitter

Install the DM-TX-200-C-2G into a 2-gang electrical box or into a 6 in.

floor box.

Install into an Electrical Box

Install the DM-TX-200-C-2G into a 2-gang electrical box in a wall, floor, or

ceiling. A minimum mounting depth of 2-1/2 in. (64 mm) is required.

To install the DM-TX-200-C-2G into an electrical box:

1. Use a Phillips screwdriver and the four included #6-32 x 3/4 in. screws

to attach the DM-TX-200-C-2G to the electrical box.

2. Attach a decorator-style faceplate (not included) to the front of the

DM-TX-200-C-2G using four screws (not included).

Install into a Floor Box

Install the DM-TX-200-C-2G into a 2-gang opening in a 6 in. (153 mm)

deep floor box.

Use a Phillips screwdriver and the four included #6-32 x 3/4 in. screws to

attach the DM-TX-200-C-2G to an installed floor box.

DM-TX-200-C-2G QuickStart

Wall Plate DigitalMedia 8G+® Transmitter 200

Connect the Front Panel

Connect the rear panel of the transmitter as required for the application.

Determine the IP Address

The configuration of the DM-TX-200-C-2G within a DM 8G+® system

determines how the IP address of the DM-TX-200-C-2G is set:

lIf the DM-TX-200-C-2G is connected to a DM switcher, the IP address

is configured by the switcher automatically.

lIf the DM-TX-200-C-2G is connected directly to a DM 8G+ receiver

(commonly referred to as a standalone configuration in which no

DigitalMedia switcher is used), the IP address of the transmitter is

assigned using DHCP (Dynamic Host Configuration Protocol) by

default. If you wish to assign a static IP address, do either of the

following:

oTo assign the default static IPaddress of the transmitter, hold

down the SETUP button while the unit boots up. The default static

IPaddress 192.168.1.239 overwrites the current setting.

oTo manually set a static IP address other than the default address,

use the Crestron Toolbox™ application.

DM-TX-200-C-2G QuickStart

Wall Plate DigitalMedia 8G+® Transmitter 200

Visit the Product Page

Scan the QR code to visit the product page.

DM-TX-200-C-2G

www.crestron.com/model/6505824

Additional Information

Original Instructions

The U.S. English version of this document is the original instructions.

All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron

Service Providers (CSPs) under a limited nonexclusive, nontransferable Software

Development Tools License Agreement. Crestron product operating system software is

licensed to Crestron dealers, CSPs, and end-users under a separate End-User License

Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource.

Crestron, the Crestron logo, Crestron Toolbox, DigitalMedia, DigitalMedia 8G+, DM,

and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics,

Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance

logo are either trademarks or registered trademarks of the HDBaseT Alliance in the

United States and/or other countries. HDMI, the HDMI logo, and High Definition

Multimedia Interface are either trademarks or registered trademarks of HDMI

Licensing LLC in the United States and/or other countries. Other trademarks,

registered trademarks, and trade names may be used in this document to refer to

either the entities claiming the marks and names or their products. Crestron disclaims

any proprietary interest in the marks and names of others. Crestron is not responsible

for errors in typography or photography.

Doc. 7759C

05/07/20

DM-TX-200-C-2G QuickStart

Wall Plate DigitalMedia 8G+® Transmitter 200

Altri manuali per DM-TX-200-C-2G

Altri manuali Crestron Trasmettitore

Crestron

Crestron ST-4T Manuale utente

Crestron

Crestron IM-TCCV Guida rapida

Crestron

Crestron DM-TX-200-C-2G Manuale utente

Crestron

Crestron DM-TX-4K-202-C Manuale del proprietario

Crestron

Crestron CNRFHT-15A Manuale utente

Crestron

Crestron HD-TX-4KZ-111-1G Manuale utente

Crestron

Crestron IM-FTCC-B Come usare

Crestron

Crestron DM-TX-4KZ-100-C-1G Manuale utente

Crestron

Crestron DigitalMedia 8G+ DM-TX-4K-100-C-1G Disegno dimensionale

Crestron

Crestron DM Lite HD-TX-4KZ-101 Manuale utente

Crestron

Crestron DigitalMedia 8G+ DM-TX-201-C Disegno dimensionale

Crestron

Crestron HD-TX-4KZ-111 Manuale utente

Crestron

Crestron DM-TX-4K-202-C Disegno dimensionale

Crestron

Crestron IM-WCVP Guida rapida

Crestron

Crestron IM-TCC Come usare

Crestron

Crestron HD-TXC-4KZ-101 Manuale utente

Crestron

Crestron DigitalMedia DMF-TX-4K-SFP Disegno dimensionale

Crestron

Crestron HD-TXA-4KZ-101 Manuale utente

Crestron

Crestron CNIRHT-MM Manuale utente

Crestron

Crestron DM-TX-4K-100-C-1G Disegno dimensionale

Crestron

Crestron DigitalMedia HD-TX-4KZ-421-CHGR Manuale utente

Crestron

Crestron DigitalMedia DM-TX-100F Manuale utente

Crestron

Crestron HD-TX-4KZ-101-1G Manuale utente

Crestron

Crestron 4K DigitalMedia 8G+ DM-RX-4K-202-C Manuale del proprietario

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente