Crestron DM-TX-4K-202-C Manuale utente

The Crestron® DM-TX-4K-202-C and DM-TX-4K-302-C provide a

versatile interface for computers and high-definition AV sources as part

of a complete Crestron DigitalMedia™ system. The devices function as

DM 8G+® transmitters and switchers, and also provide control module

functionality.

In the Box

1DM-TX-4K-202-C or DM-TX-4K-302-C, 4K DigitalMedia 8G+®

Transmitters

Additional Items

1 Connector, 2-Pin (2003574)

1 Connector, 5-Pin (2003577)

Install the Transmitter

NOTE:

This unit is for indoor use only. It is not intended for outdoor use.

Cet appareil est réservé à une utilisation en intérieur. Il n’est pas

destiné à une utilisation en extérieur.

The DM-TX-4K-202-C and DM-TX-4K-302-C can be mounted onto a flat

surface or onto a rack rail.

Mount onto a Flat Surface

Using four mounting screws (not included), mount the device onto a flat

surface such as a wall or a ceiling.

DM-TX-4K-202-C and DM-TX-4K-302-C QuickStart

4K DigitalMedia 8G+® Transmitters

Mount onto a Rack Rail

The DM-TX-4K-202-C or DM-TX-4K-302-C can be mounted onto a front

or rear rack rail. To mount the device:

1. Position either of the mounting flanges so that the holes align with the

holes in the rack rail.

2. Secure the device to the rack rail using two rack mount screws (not

included).

Connect the Transmitter

Connect the device as required for the application.

NOTES:

lThe DM OUT port of the DM-TX-4K-302-C is a PoDM+ powered

device (PD) port and is also compatible with HDBaseT® PoE+. The

DM OUT port of the DM-TX-4K-202-C is a standard PoDM PD port

and is also compatible with HDBaseT PoE.

oIn order for the port to receive PoDM+ or PoDM, the port

requires connection to a DigitalMedia™ switcher or other

DigitalMedia equipment that has a corresponding PoDM+ or

PoDM power sourcing equipment (PSE) port.

oIn order for the port to receive HDBaseT PoE+ or HDBaseT PoE,

the port requires connection to equipment that has a

corresponding HDBaseT PoE+ or HDBaseT PoE PSE port.

Wiring that is connected to a PoDM+, PoDM, HDBaseT PoE+, or

HDBaseT PoE PSE port is for intrabuilding use only.

As an alternative to PoDM, PoDM+, HDBaseT PoE+, HDBaseT PoE,

the optional PW-2407WU power pack (sold separately) can be used

to power the devices.

lThe DM-TX-4K-302-C requires PoDM+, HDBaseT PoE+, or the

optional PW-2407WU power pack to power a USB device that is

connected to the USB HID port. PoDM, HDBaseT PoE, or the

optional PW-2407WU power pack can be used to power the

DM-TX-4K-302-C if no USB device is connected to the USB HID

port.

The DM-TX-4K-202-C requires PoDM, HDBaseT PoE, or the

optional PW-2407WU power pack to power a USB device that is

connected to the USB HID port.

DM-TX-4K-202-C and DM-TX-4K-302-C QuickStart

4K DigitalMedia 8G+® Transmitters

Left and Right Side Connections (DM-TX-4K-302-C Shown)

DM-TX-4K-202-C and DM-TX-4K-302-C QuickStart

4K DigitalMedia 8G+® Transmitters

For information about DM OUT and VGA IN connector pin assignments,

refer to the following illustrations and tables.

DM OUT Wiring

Pin Number Wire Color

1 Orange/White

2 Orange

3 Green/White

4 Blue

5 Blue/White

6 Green

7 Brown/White

8 Brown

VGA IN Wiring (DM-TX-4K-302-C Only)

PinNumber RGB YPbPR S-Video Composite

1 R Pr C

2 G Y Y

3 B Pb COMP

5 GND GND GND GND

6 RED_

GND

PR_

GND

7 GRN_

GND

8 BLU_

GND

Pb_

GND

13 H

14 V

NOTE: For best video performance, ground connections should be kept

separate. Do not connect ground wires to the connector shell. The

connector shell is reserved for the cable shield.

Upgrade the Firmware

Before using the device, upgrade the firmware. The latest firmware can be

downloaded from the DM-TX-4K-202-C and DM-TX-4K-302-C product

page on the Crestron website (www.crestron.com).

DM-TX-4K-202-C and DM-TX-4K-302-C QuickStart

4K DigitalMedia 8G+® Transmitters

Determine the IP Address

The physical configuration of the DM-TX-4K-202-C or DM-TX-4K-302-C

within a DigitalMedia 8G+ system determines how the IP address of the

transmitter is set:

lIf the transmitter is connected to a DigitalMedia switcher, the IP

address is configured by the switcher automatically. You do not need

to set the IP address.

lIf the transmitter is connected directly to a DigitalMedia 8G+ receiver

(commonly referred to as a standalone configuration in which no

DigitalMedia switcher is used), the IP address of the transmitter is

assigned using DHCP (Dynamic Host Configuration Protocol) by

default. If you wish to assign a static IP address, do either of the

following:

oTo assign the default static IP address of the transmitter, hold

down the SETUP button while the unit boots up. The default static

IP address, which is 192.168.1.204 for the DM-TX-4K-202-C and

192.168.1.205 for the DM-TX-4K-302-C, overwrites the current

setting.

oTo manually set a static IP address other than the default address,

use the Crestron Toolbox™ software.

Visit the Product Page

Scan the QR code to visit the product page.

DM-TX-4K-202-C

www.crestron.com/model/6507320

DM-TX-4K-302-C

www.crestron.com/model/6507319

DM-TX-4K-202-C and DM-TX-4K-302-C QuickStart

4K DigitalMedia 8G+® Transmitters

Additional Information

Original Instructions

The U.S. English version of this document is the original instructions.

All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron

Service Providers (CSPs) under a limited nonexclusive, nontransferable Software

Development Tools License Agreement. Crestron product operating system software is

licensed to Crestron dealers, CSPs, and end-users under a separate End-User License

Agreement. Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource.

Doc. 7743F

04/15/20

DM-TX-4K-202-C and DM-TX-4K-302-C QuickStart

4K DigitalMedia 8G+® Transmitters

Altri manuali per DM-TX-4K-202-C

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Crestron Trasmettitore

Crestron

Crestron DM Lite HD-TX-4KZ-101 Manuale utente

Crestron

Crestron DM-TX-4K-202-C Disegno dimensionale

Crestron

Crestron DM-TX-4KZ-100-C-1G Manuale utente

Crestron

Crestron DigitalMedia 8G+ DM-TX-201-C Manuale del proprietario

Crestron

Crestron DigitalMedia 8G+ DM-TX-201-C Disegno dimensionale

Crestron

Crestron CNIRHT-MM Manuale utente

Crestron

Crestron HD-TX-4KZ-111 Manuale utente

Crestron

Crestron HD-TXC-4KZ-101 Manuale utente

Crestron

Crestron DigitalMedia 8G 401 Series Disegno dimensionale

Crestron

Crestron DM-TX-4KZ-202-C Manuale utente

Crestron

Crestron DM-TX-200 Come usare

Crestron

Crestron ST-4T Manuale utente

Crestron

Crestron DigitalMedia HD-TX-4KZ-421-CHGR Manuale utente

Crestron

Crestron DM-TX-201-C Manuale del proprietario

Crestron

Crestron DigitalMedia 8G+ DM-TX-4K-100-C-1G Disegno dimensionale

Crestron

Crestron IM-WCVI Manuale utente

Crestron

Crestron DigitalMedia DM-TX-200-2G Come usare

Crestron

Crestron DM-TX-200-C-2G Manuale utente

Crestron

Crestron DigitalMedia DMCF-TX-4K-SFP Disegno dimensionale

Crestron

Crestron HD-TX-4KZ-401 Manuale utente

Crestron

Crestron DM-TX-4KZ-202-C Disegno dimensionale

Crestron

Crestron DigitalMedia 8G+ DM-TX-4KZ-202-C Manuale del proprietario

Crestron

Crestron DigitalMedia 8G+ DM-TX-201-C Disegno dimensionale

Crestron

Crestron QM-TX Manuale utente

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente