Crosley LK-716B Manuale utente
Bluetooth Keyboard Manual
Item:LK-716B
1. Overview of keyboard:
2. Features:
1）Support iPad or iPhone OS4.0 or later, Android 3.1 or later
2）mobile phone(with bluetooth HID profile or driver, supporting bluetooth HID keyboard)
3）Support computer based on Windows XP/Vista/7/Mac etc
4）Using with non-BT equipped PC or Laptop require a USB bluetooth adapter
5）Universal wireless Bluetooth 3.0 connectivity
6）Dustproof, washable, and made by silicone
7）Built-in Li-battery charged by portable USB cable
8）Working range : 10m
3. Package Contents
1)Mini Bluetooth keyboard
2) User manual
3) USB cable
Pairing iPad Bluetooth keyboard with iPad
Preparation: Pls make sure your iPad has adequate battery and full charge your iPad keyboard
prior to proceeding ( For first use ,pls charge it with supplied USB cable for at least 3 hours)
Step 1: Toggle on the Power switch, the Power and Bluetooth Indicators should be lit for
approximately 3 seconds. It is now in idle mode. Press the connect button 3-5seconds ,the
Bluetooth Indicator should be flashing. It is now in pairing mode.
Remark : The Bluetooth Indicator LED is blue, The charge Indicator LED is red, The Battery low
indicator LED is Red.
Step 2: On the iPad, tap setting, within the General tab, select Bluetooth. If Bluetooth is turned off
by default, swipe to turn it on. The iPad should now be searching for all Bluetooth devices within
range. Wait for Bluetooth Wireless keyboard to appear under devices.
Step 3:Tap on Bluetooth wireless keyboard to connect, it is required to type in the 4-digit code
according to the on-screen instruction. Hit enter, it should now be connected.
Notice:
1. When low power, the LED will light up for 1 second and be blinking intermittently.
2. When charging, the LED will light up, and be off when full charging.
Recharge the battery:
Connect the mini Bluetooth Keyboard to your computer’s USB port by the power USB cable( you
can find the cable in the retail box).
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FC C Rules. These limits are desi gned to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if no t installed and used in accordance with the instructions, may cause harmful interference to ra dio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Caution Any change or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
Indice
Altri manuali Crosley Tastiera
