CROSSIO CoolPower 35 Manuale utente
EN
CZ
MANUAL
2
CoolPower 35
Contents
Disclaimer ................................................................................................ 3
Safety Instructions ................................................................................. 3
Package Content.................................................................................... 4
Product Description ............................................................................... 4
Reversible Lid...................................................................................4
Technical Specications........................................................................ 5
Display Screen Initialization..........................................................6
Power On/O...................................................................................6
Temperature ....................................................................................6
Cooling Mode ..................................................................................6
Battery Protection Mode...............................................................7
Voltage Reference ..........................................................................7
Temperature Unit Setting..............................................................7
Reset .................................................................................................8
App Connection...................................................................................... 8
Main Interface.................................................................................8
Cleaning and Care ................................................................................. 8
Error Code Table .................................................................................... 9
ENGLISH
3
CoolPower 35
Disclaimer
Read all instructions carefully regarding using this product. If you do not
follow the safety instructions and information regarding proper handling
in this user manual, we accept no liability for any related personal injury
or damage to property. This user manual is intended to assist you in using
the product. Software and hardware specications in this user manual
are for reference purpose only. All pictures shown in this manual are for
the illustration purpose only. Actual product may vary. CROSSIO reserves
the right of nal interpretation for the content in this user manual and all
documents associated with this product. CROSSIO also reserves the right
to update, change or terminate this user manual without a prior notice.
Safety Instructions
– Do not operate the device if it is visibly damaged.
– Do not block the gaps of the fridge with things like a pin, wire etc.
– Do not expose the device to the rain and do not soak in water. There is a
risk of leakage or electric shock!
– Do not place the device near open ames or other heat sources
(heaters, direct sunlight…).
– Do not store any explosive substances like spray cans with
a ammable content.
– Ensure the supply cord is dry and not trapped or damaged.
– The device should be used only with the power supply unit
provided by CROSSIO.
– Once you unpack the unit it must be placed on a level surface for at least
6 hours to settle down the coolant.
– Make sure that the device stays horizontally while running. The tilt
angle should be less than 5° for long time running and less then 45° for
short time running.
– Do not drain the device upside down.
– Use the wet cloth to clean the device before use.
– Keep the product out of the reach of children. Close supervision is
necessary when the product is used near children.
– Do not use sharp tools to defrost!
! CAUTION !! CAUTION !
– The device can be repaired only by the qualied person. Incorrect repair
may cause danger.
MANUAL
4
CoolPower 35
– The device can be used only with the rechargeable battery. Non-
rechargeable batteries can be dangerous because of the potential
re and explosion.
– If you nd any non-standard noise, smell or leakage, stop using the
product and let CROSSIO know about it.
Package Content
– CROSSIO CoolPower 35
– AC charging cable
– DC car charger cable
Product Description
To pull out the rod of the telescoping handle you need to press the
buttons on each side of the handle.
Reversible Lid
– Open the lid to 90° angle.
– Take o the lid from one side (corner).
– Take o the lid from the other side (corner).
– Reverse the lid and put back to the corners one by one.
5
CoolPower 35
Technical Specications
Model TWW35
Climatic Category T, ST, N, SN
Rated Voltage AC 100V ~ 240V, 50-60Hz
Rated Voltage DC 12V/24V
Rated Current for AC 1.2A-0.5A
Rated Current for DC 5.0A (12V) / 2.5A (24V)
Rated Solar Voltage 12~50V
Solar Input DC5525
Protective Classication of
Electric Shock Resistance
Refrigerant R134a (40g)
Foam Vesicant C5H10
Detachable Battery Type Li-ion
Model of the Battery FSAK-002
Rated Voltage of the Battery 11.1V
Capacity of the Battery 15600mAh
Inner Capacity of the Fridge 35l (25+10l)
Noise level ≤ 45dB
Weight 18.44 kg
Dimensions 711*460*441 mm
MANUAL
6
CoolPower 35
Operation
The CoolPower 35 is a dual zone fridge which means that you can set the
temperature for each compartment. One is 25l (LEFT) and the other one
10l (RIGHT - above the wheels).
Display Screen Initialization
– When you connect the fridge with electricity, the buzzer will make
a long beep, the display will turn on for 2s and the fridge will be in
the standby mode.
Power On/O
– Press the ON/OFF button to turn On the fridge.
– Press the ON/OFF button and hold for 3s to turn O the fridge.
Temperature
– Each zone of the fridge can set the temperature separately.
– Press and hold the + and SET buttons for 3s to switch On/O
the LEFT compartment.
– Press and hold the – and SET buttons for 3s to switch On/O
the RIGHT compartment.
– When both of the compartments are in the running state, press + and –
at the same time to enter the LEFT compartment temperature setting.
– Press + or – to adjust the temperature as required.
– Press the SET button to switch from LEFT to RIGHT compartment
and adjust the temperature with + or – button as required on
the RIGHT compartment.
– The setting will be saved after no other operation for 4s.
– The displayed temperature after setting is the current temperature. It will
take a while to reach the set temperature.
Two compartments can not be switched o at the same time!
7
CoolPower 35
Cooling Mode
– When the fridge is On, press the SET button to switch between MAX (fast
cooling) or ECO (energy saving). Factory default setting is MAX.
Battery Protection Mode
– When the fridge is On, press and hold the SET button for 3s until the
display starts to ash.
– Press the SET button again to select protection mode between
H (High), M (Medium) and L (Low). Factory setting is H.
When the fridge is powered by a car charger (DC) it is advised to use H
mode.
Each car has a dierent output voltage and by setting H mode you prevent
the car battery from exhaustion.
When the fridge is powered by a detachable battery it is advised to use M
or L mode. If battery protection occurs (F1 on the display) the mode should
be adjusted from H to M or L mode.
Voltage Reference
MODE
/ INPUT
DC 12V DV 24V
CUT OUT CUT IN CUT OUT CUT IN
H 11.1V 12.4V 24.3V 25.7V
M 10.1V 11.4V 22.3V 23.7V
L 8.5V 10.9V 21.3V 22.7V
Temperature Unit Setting
– Switch O the fridge.
– Press and hold the SET button for 3s until the display shows E1.
– Press the SET button again to switch to E5.
– Press + or – button to choose between Celsius or Fahrenheit. Factory
setting is Celsius.
MANUAL
8
CoolPower 35
Reset
– Switch O the fridge.
– Press and hold the SET button for 3s until the display shows E1.
– Press + and – buttons at the same time for a few seconds.
App Connection
Visit the Appstore or Google Play to download the CAR FRIDGE FREEZER app.
– Turn on the Bluetooth on your mobile phone
– Open the app
– Start scanning the fridge in the app
– Click on the fridge icon
– Press SET button on the fridge to conrm the frist connection
Main Interface
– Switch On/O
– Temperature set for LEFT and RIGHT compartment separately
– ECO mode settings
– Lock of the fridge panel/display
– °C / °F switch
– H / M / L mode battery protection settings
– Unpairing
Cleaning and Care
– Unplug the fridge rst to avoid electric shock.
– Remove the cover and drain from the hole on the bottom of
the Left compartment.
– Use wet cloth to clean the device and dry it.
– Defrost the device to avoid reduced cooling capacity. (DO NOT USE THE
SHARP TOOLS TO REMOVE FROST)
– If you do not use the fridge for a long time:
Clean the device as guided above and put the fridge in a cool dry place.
– It is advised to leave the lid slightly open to prevent odors from forming.
9
CoolPower 35
Error Code Table
Code F1 Low voltage. Adjust the battery protection
mode from H to M or L.
Code F2 Condenser fan is overloaded. Disconnect
the fridge from power for 5 min and restart.
If the code shows again, contact ILICO
Europe RMA service.
Code F3 Compressor switches On too often. Disconnect
the fridge from power for 5 min and restart.
If the code shows again, contact ILICO
Europe RMA service.
Code F4 Compressor is not kicking in. Disconnect
the fridge from power for 5 min and restart.
If the code shows again, contact ILICO
Europe RMA service.
Code F5 Overheating of the compressor and
electronics. Disconnect the fridge from power
for 5 min and restart. If the code shows again,
contact ILICO Europe RMA service.
Code F6 No parameter can be detected by the
controller. Disconnect the fridge from power
for 5 min and restart. If the code shows again,
contact ILICO Europe RMA service.
Code F7 or F8 Temperature sensor is faulty. contact ILICO
Europe RMA service.
Fridge does not work Check if the switch is ON.
Check if the plug and socket
are connected well.
Check if the fuse has been burnt or not.
Switching On/O frequently may cause the
delay of the compressor.
Food is frozen The temperature was set too low.
Increase the temperature.
Indice
Lingue:
