CST rl25hv Manuale utente
IMPORTANT: IMPORTANT: IMPORTANTE:
Read Before Using Lire avant usage Leer antes de usar
Operating/Safety Instructions
Consignes de fonctionnement/sécurité
Instrucciones de funcionamiento y seguridad
For English Version Version française Versión en español
See page 5 Voir page 15 Ver la página 25
Call Toll Free for
Consumer Information
& Service Locations
Pour obtenir des informations
et les adresses de nos centers
de service après-vente,
appelez ce numéro gratuit
Llame gratis para
obtener información
para el consumidor y
ubicaciones de servicio
RL25H
RL25HV
1-800-435-1859 www.cstberger.com
-2-
1
1
2
3
4
5
3
2
8
7
6
6
16
12
14
13
1
13
15
11
10
9
12
11
10
9
8
7
RL25HV
RL25H
-3-
16
71
19
18
20
RL25H
RL25HV
-4-
22
23
28
21 24
27
26
25
-5-
22
21
24
23
-6-
-7-
H
G
-8-
General Safety Rules
Read all instructions. Failure to follow all instructions listed below may
result in hazardous radiation exposure, electric shock, fire and/or serious
injury. The term “tool” in all of the warnings listed below refers to your mains-operated
(corded) tool or battery-operated (cordless) tool.
The following labels are on your laser tool for your convenience and safety. They
indicate where the laser light is emitted by the tool. ALWAYS BE AWARE of their
location when using the tool.
If glass light house breaks when dropped, contact customer service
immediately. Broken glass can cause laceration hazard and unit to
lose its IP rating.
DO NOT direct the laser beam at persons or animals and do not stare into
the laser beam yourself. This tool produces laser class 2 laser radiation
and complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007. This can lead to
persons being blinded.
DO NOT remove or deface any warning or caution labels.
Removing labels increases the risk of exposure to laser radiation.
Use of controls or adjustments or performance of procedures other than those
specified in this manual, may result in hazardous radiation exposure.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of
the dangers of looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into the
laser beam intentionally or unintentionally. Serious eye injury could result.
ALWAYS position the laser tool securely. Damage to the laser tool and/or serious
injury to the user could result if the laser tool falls.
ALWAYS use only the accessories that are recommended by the manufacturer of
your laser tool. Use of accessories that have been designed for use with other laser
tools could result in serious injury or unsatisfactory performance.
DO NOT use this laser tool for any purpose other than those outlined in this
manual. This could result in serious injury or unsatisfactory performance.
DO NOT leave the laser tool “ON” unattended in any operating mode.
DO NOT disassemble the laser tool. There are no user serviceable parts inside. Do
not modify the product in any way. Modifying the laser tool may result in hazardous
laser radiation exposure.
!
WARNING
!
WARNING
RL25H/RL25HV
-9-
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
DO NOT operate the laser tool around
children or allow children to operate
the laser tool. Serious eye injury could
result.
DO NOT use measuring tools,
attachments and accessories outdoors
when lightening conditions are present.
Electrical safety
Batteries can explode or leak, cause
injury or fire. To reduce this risk,
always follow all instructions and
warnings on the battery label and
package.
Remove the batteries from the tool
when not using it for extended periods.
When storing for extended periods, the
batteries can corrode and discharge
themselves.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries.
SAVE THESE INSTRUCTIONS.
Replace all old batteries at the same
time with new batteries of the same
brand and type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per
local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Personal safety
Stay alert, watch what you are doing
and use common sense when operating
a tool. Do not use a tool while you are
tired or under the influence of drugs,
alcohol or medication. A moment of
inattention while operating a tool may
result in serious personal injury or
incorrect measurement results.
Use safety equipment. Always wear
eye protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
DO NOT use the laser viewing
glasses as safety goggles. The laser
viewing glasses are used for improved
visualization of the laser beam, but they
do not protect against laser radiation.
DO NOT use the laser viewing
glasses as sun glasses or in traffic.
The laser viewing glasses do not afford
complete UV protection and reduce color
perception.
DO NOT use any optical tools such
as, but not limited to, telescopes or
transits to view the laser beam. Serious
eye injury could result.
DO NOT stare directly at the laser beam
or project the laser beam directly into
the eyes of others. Serious eye injury
could result.
Use caution when using measuring
tools in the vicinity of electrical
hazards.
Magnets
Keep the tool and laser target away
from cardiac pacemakers. The magnets
of the tool and laser target plate generate
a field that can impair the function of
cardiac
pacemakers.
Keep the tool and
laser target away from
magnetic data medium
and magnetically-sensitive
equipment.
The effect of the magnets of the tool and
laser target plate can lead to irreversible
data loss.
Noise Information
Do not hold the measuring tool close to
your ear! The A-weighted sound pressure
level of the audio signal at one meter
distance is 75-85dB(A). Serious injury
could result.
Use and care
Use the correct tool for your
application. The correct tool will do the
job better and safer.
Do not use the tool if the switch does
not turn it on and off. Any tool that
cannot be controlled with the switch is
dangerous and must be repaired.
Store idle tool out of the reach of
children and do not allow persons
unfamiliar with the tool or these
instructions to operate the tool. Tools
are dangerous in the hands of untrained
users.
Maintain tools. Check for misalignment
or binding of moving parts, breakage of
parts and any other condition that may
affect the operation. If damaged, repair
tool before use. Many accidents are
caused by poorly maintained tools.
Use the tool, accessories, etc., in
accordance with these instructions
and in the manner intended for the
particular type of tool, taking into
-10-
account the working conditions and the work to be performed. Use of the tool for
operations different from those intended could result in a hazardous situation.
Service
Have your tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the tool is maintained.
Develop a periodic maintenance schedule for tool.
Follow checking recalibration procedures outlined in this instruction manual.
When cleaning a tool be careful not to disassemble any portion of the tool since
internal wires may be misplaced or pinched or may be improperly mounted.
Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may
damage plastic parts.
SAVE THESE INSTRUCTIONS.
Inserting/Replacing the Battery
Always replace all batteries
at the same time. Only use
batteries from one brand and with the identical
capacity.
Remove the batteries from the tool when not
using it for extended periods. When storing for
extended periods, the batteries can corrode
and discharge themselves.
Alkaline batteries are recommended for
the tool.
When inserting, pay attention to the correct
polarity according to the representation on the
inside of the battery lid.
It is the user’s responsibility
to periodically check the
accuracy of the measuring tool as work
progresses. Always check the accuracy of
the measuring tool after it has been dropped
or subject to extreme temperatures and
temperature variations
Preparation
!
WARNING
!
WARNING
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali CST Livello laser
