CueScript CSM V2 Series Manuale utente
Installation and Operation Manual
Next Generation On-Camera Prompter Displays
Model CSM17-19 V2 Prompters
2
Contents
1.0 Introduction.................................................................................................................................................. 4
2.0 CueScript Prompter Features .................................................................................................................. 4
3.0 Display Technical Specifications .............................................................................................................. 4
3.1 Model CSM17 ...................................................................................................................................... 4
3.2 Model CSM19 ...................................................................................................................................... 4
4.0 Signal I/O....................................................................................................................................................... 5
4.2 Output facilities........................................................................................................................................ 5
5.0 Power Requirements .................................................................................................................................... 5
6.0 Dimensions ................................................................................................................................................... 5
6.1 Model CSM17 ...................................................................................................................................... 5
6.2 Model CSM19 ...................................................................................................................................... 5
7.0 Environmental.......................................................................................................................................... 5
8.0 Routine Maintenance .............................................................................................................................. 6
9.0 Installation ............................................................................................................................................... 6
9.1 Inspecting New Prompter and Accessories........................................................................................ 6
9.2 Installation Requirements................................................................................................................... 6
10.0 Connectors and Controls ......................................................................................................................... 7
10.1 AC Power.......................................................................................................................................... 7
10.2 DC Power.......................................................................................................................................... 7
10.3 Composite Video In.......................................................................................................................... 7
10.4 Composite input termination.......................................................................................................... 8
10.5 SD/HD/3G-SDI Prompter and Talent Inputs ................................................................................... 8
10.6 SD/HD/3G-SDI Auxiliary output...................................................................................................... 8
10.7 HDMI In ............................................................................................................................................ 8
10.8 Cue Light (Optical) Sensor In ........................................................................................................... 8
10.9 Dual USB Type A .............................................................................................................................. 9
10.10 LTC input........................................................................................................................................... 9
10.11 Accessory DC Power Out ............................................................................................................... 10
11.0 Operation............................................................................................................................................... 10
11.1 Control Panel.................................................................................................................................. 10
3
11.2 Backlight Inactivity Control ........................................................................................................... 11
11.3 Input select..................................................................................................................................... 11
11.4 Image rotate................................................................................................................................... 11
12.1 Menu Start.................................................................................................................................. 11
12.2 Menu Fwd/In.............................................................................................................................. 11
12.3 Menu Back/Out.......................................................................................................................... 11
12.4 Menu Down................................................................................................................................ 11
12.5 Menu Up..................................................................................................................................... 11
12.6 Menu guide ................................................................................................................................ 12
12.7 Input select................................................................................................................................. 14
12.8 Test pattern................................................................................................................................ 14
12.9 Main H offset.............................................................................................................................. 15
12.10 Main V offset.............................................................................................................................. 15
12.11 Cuelight Sensor........................................................................................................................... 15
12.12 Tally switch................................................................................................................................. 15
12.13 Flip/mirror.................................................................................................................................. 15
12.14 Overscanning.............................................................................................................................. 15
12.15 Aspect ratio ................................................................................................................................ 15
12.16 USB-A Mode ............................................................................................................................... 15
12.17 TC source .................................................................................................................................... 15
12.18 Powersave idle ........................................................................................................................... 15
13.0 EMC Compliance.................................................................................................................................... 16
13.3 CE Declaration........................................................................................................................................ 16
14.0 SAFETY INFORMATION ............................................................................................................................. 17
15.0 WARNINGS................................................................................................................................................ 17
4
1.0 Introduction
The release of the Cuescript CSM 2 series of prompting monitors marks a significant advance in this area of
production. Feature-rich and ergonomically designed, the V2 series offers leading-edge technology. The
core of the monitor is a high-resolution video rendering engine providing a CueTalk® interface over IP to the
CueIt prompting application. In addition, the monitor offers Video over IP (2110), digital and analogue video
inputs, a switched auxiliary SDI output, extensive USB interfacing and a user-friendly control interface and
menu system. At the front end is a high-resolution 1500 nit low power display capable of operating in a
wide range of challenging environments.
2.0 CueScript Prompter Features
•Unique quick mount doubles as external heat sink
•T-rail slots on the underside for accessory mounting
•Aluminum case with scratch resistant powder coat finish
•Backlight dimming or cut feature for static video
•Unique curved dual dimmer-controlled Tally Lights with Optical Sensor input
•4-Pin XLR DC power out socket for external devices
•Powered by AC mains or 4 Pin XLR 12V DC
•Designed for maximum performance with minimum power consumption
•CueTalk®, 2 x SD/HD/3G-SDI, 1 x HDMI, and 1 x composite inputs
•Optional SFP-2110 input facility
•Switched auxiliary SDI output
•Top-level picture rotate/invert & input select buttons
•Backlit LED pushbuttons for ease of operation
•Comprehensive on-screen menu
3.0 Display Technical Specifications
3.1 Model CSM17
Screen Size 17.0 inch diagonal
Display Area 337.92(H) x 270.336(V)mm
Native Resolution 1280 x 1024 (SXGA)
Brightness 1500 cd/m2
Contrast Ratio 1000:1
Viewing Angle 170°(H), 160°(V)
Backlight Technology High Brightness LED
3.2 Model CSM19
Screen Size 19.0 inch diagonal
Display Area 376.32(H) x 301.06(V)mm
5
Native Resolution 1280 x 1024 (SXGA)
Brightness 1500 cd/m2
Contrast Ratio 1000:1
Viewing Angle 170°(H), 160°(V)
Backlight Technology High Brightness LED
4.0 Signal I/O
All CueScript prompters are designed to accept most common video signals used in prompting. The
following signals are compatible. Please contact CueScript for any special requirements.
4.1 Input facilities
•CueTalk®
•SD/HD/3G-SDI
•HDMI
•Composite PAL/NTSC/SECAM
•Optional SFP+ (Supported standard ST2110)
4.2 Output facilities
•Auxiliary switched SDI
5.0 Power Requirements
•DC 3.6A @ 12V nominal (44W)
•AC 100-240 V 50-60 HZ 40VA
6.0 Dimensions
6.1 Model CSM17
Outer Dimensions: 396 mm W x 341 mm H x 68 mm D (15.574” W X 13.43” H X 2.67” D)
Weight: 5.00 kg. 11.0 Lb.
6.2 Model CSM19
Outer Dimensions: 430 mm W x 369 mm H x 68 mm D (16.920” W X 14.52” H X 2.67” D)
Weight: 4.66 kg. 10.25 Lb.
7.0 Environmental
All CueScript prompter monitors are designed to be operated within the environment specified below.
Temperature Range: Operation: 5 to 40 degrees C
Storage: -20 to 60 degrees C
Relative Humidity: 0-95% Non-condensing
6
8.0 Routine Maintenance
All CueScript prompter monitors are designed to be low maintenance. Recommended maintenance is as
follows:
Remove dust from the cabinet when it accumulates. The front LCD panel may cleaned with a soft cotton
cloth. Use only a small amount of mild soap and water solution to dampen the cloth if necessary.
No routine checks or adjustments are required.
9.0 Installation
9.1 Inspecting New Prompter and Accessories
Each item should be inspected as it is unpacked to see if any damage has occurred in shipping. If so,
please file a claim with the shipping carrier. Please retain the original packaging in case it is
necessary to return the unit.
Any missing items should be noted and brought to the attention of the shipper.
9.2 Installation Requirements
The following requirements should be observed when installing a CSM17/19 V2 prompter.
Do not exceed the maximum operating ambient temperature of +40°C .
Do not block any ventilation holes in the prompter cabinet. Free flow of air is required for proper
operation.
Use the power supply cord supplied with the unit. Connect the cord to a grounded AC mains outlet.
EMC and Safety Compliance: CSM17/19 V2 Prompters have been designed for EMC and safety
compliance. The installer or operator is responsible for compliance of the system as built and used
under the regulations governing such use.
7
10.0 Connectors and Controls
10.1 AC Power
AC Mains Inlet: IEC socket with built in fuseholder and lighted ON/OFF switch
AC Mains Cord required: Three wire 18 Gauge conductors with IEC socket and country
appropriate plug. Safety ratings such as UL or TUV are preferred.
Fuse type: 5X20mm Fast acting glass fuse rated at 3A 250V AC.
Example fuse: Littelfuse part no. 0235003.HXP
The fuse must only be replaced with one of the same type and current
rating.
10.2 DC Power
The CueScript prompters require a regulated supply of 12 volts DC rated at 4 amps. Alternatively, a
battery with sufficient capacity may be used. The prompter is designed to operate in the range 9V –
18V DC.
Prompter Connector type: 4 pin XLR Male plug
Mating (cable) connector: 4 pin XLR Female socket
Pin
Description
1
GROUND (connected to monitor chassis)
2
No Connection
3
No Connection
4
+12V DC
10.3 Composite Video In
Prompter Connector type: 75 Ohm BNC Socket
Mating (source) connector: 75 Ohm BNC Plug
Pin
Description
Center
Composite Video In (PAL, NTSC, or
SECAM)
Outer
Ground
8
10.4 Composite input termination
The composite input can be set to high-impedance (for “daisy-chain” operation) or 75 ohm
termination. The input termination is set in the menu –see page xx for more information.
10.5 SD/HD/3G-SDI Prompter and Talent Inputs
The SDI inputs will configure themselves automatically according to the SDI format presented. The
inputs are compliant with SMPTE 259M-C, SMPTE 292M and SMPTE424M standards.
Prompter Connector type: 75 Ohm BNC Socket
Mating (cable) connector: 75 Ohm BNC Plug
Pin
Description
Center
SD/HD-SDI In
Outer
Ground
10.6 SD/HD/3G-SDI Auxiliary output
The Auxiliary SDI output is set in the menu –see page 13 for more information.
Prompter Connector type: 75 Ohm BNC Socket
Mating (cable) connector: 75 Ohm BNC Plug
Pin
Description
Center
SDI Out
Outer
Ground
10.7 HDMI In
Prompter Connector type: 19 pin HDMI socket: Pin connections are standard HDMI. The input is
compatible with HDMI 1.3 / 1.4 / 1.4a.
10.8 Cue Light (Optical) Sensor In
When the CueScript Cuelight sensor is installed, it allows the on-board Cue lights to illuminate when
the sensor sees sufficient light. Typically the sensor is affixed with a Velcro ring around the camera
tally light LED. There are two additional ways the Cue Lights may be triggered:
Ground the sensor input (through a relay or transistor switch).
Apply a voltage (5-24 VDC) to the +Logic Tally input (Tally Sensor In pin 2).
Sensor: Photocell device. 16K Ω to 33K Ω @ 10 lux. 1M Ω or more at 0 lux.
9
Light on the optical sensor or grounded input = CUE LIGHTS ON
No light on the optical sensor or open input = CUE LIGHTS OFF
Prompter Connector type: USB Mini socket
Mating (cable) connector: USB Mini plug
Pin
Description
1
Sensor In
2
+ Logic Tally
3
No Connection
4
No Connection
5
Ground
10.9 Dual USB Type A
This connector has two duplicated functions that are set in the menu.
Mode A (default mode): Drives Cuescript proprietary timecode display
Mode B: Functions as a standard PC port for connection of a keyboard
Pin
Description
1
+5 VDC
2
RS232 display drive / USB-DN
3
Display R/G switch / USB-DP
4
Ground
10.10 LTC input
This connector can accept balanced or unbalanced inputs. Below is the front view of the input
connector.
10
Pin
Balanced
Unbalanced
1
Ground
No connection
2
LTC+
LTC
3
LTC-
Ground
10.11 Accessory DC Power Out
Provides a 12V DC @ 4A supply to operate external accessories. Fused internally. This output is only
available when supplying the prompter with AC power (minimum supply rating 100VA).
Prompter Connector type: 4 pin XLR Female socket
Mating (cable) connector: 4 pin XLR Male plug
Pin
Description
1
Ground
2
No Connection
3
No Connection
4
+12 VDC
11.0 Operation
11.1 Control Panel
There are 9 illuminated buttons on the right side of the prompter.
Reading from right to left, the button functions are as follows:
1) Backlight up
2) Backlight down
3) Input select
4) Picture horizontal/vertical flip
5) Menu scroll down
6) Menu scroll up
7) Menu item next
Questo manuale è adatto per i seguenti modelli
2
Indice
