PROAIM Gladiator Action Dolly Manuale utente
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Gladiator Acon Dolly (DL-GDTR-01)
Assembly Manua l
Seat
Flour Board
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Speed Rail
Back sport seat
2 x 16" Pneumac Tires
2 x Pull-out wheel ball pin
Wide round extension
2 x Side BoardsSquare extension
Seat Arm Seat riser (3mm,4mm)Allen key
& 10, 2 x 13 Spanner
Knob
Le/Right Main Secon
Upper wide Board
2
• Remove the pull-out wheel ball pin aached
to the Pneumac Tires with the help of your
hand.
Acon Dolly Setup
• Then secure it properly with the pull-out
wheel ball pin.
• Then, Loosen the knob of the Pneumac
Wheels.
• Slide it open with the help of a push pin buon
ed in a wide round extension.
• Insert the wide round extension in the hole
made in the right/le secon.
• Aach the pneumac wheels with the Right/
Le main secon and insert the pull-out wheel
ball pin.
3
• Then, loosen the knob on the right/le of the
main secon.
• Then aach the wide round extension on the
top part of the secon by following the same
procedure.
• Aach both the le and right main secons
together.
• Extend the length of the round extension by
pressing the push pin buon.
• Insert the wide round extension on the center
part of the main secon and ghten it
properly with the help of a knob.
• Insert the side boards matching the holes of
the main secon.
4
• Then insert the seat arm matching the hole
of the seat riser and secure it properly with
the help of its knob.
• Aach the oorboard by sliding it on the
boom part of the secon.
• Loosen the Provide knob in the main secon.
• Now, Aach the oorboard to the center part
following the same process.
• Place both the side boards on top of the main
secon.
• Match the main secon hole with the seat
riser and insert and ghten the seat riser
properly.
5
• Remove the bolt in the seat arm with the help
of a spanner and 4mm Allen key.
• Insert the seat into the seat arm and secure
the seat properly with the help of its knob.
• Finally, the seat riser or seat arm is properly
aached to the dolly.
• Then insert the seat arm bolt into the seat
arm.
• Then Tighten Properly with The Help of a
Spanner And 4mm Allen Key.
• Insert the speed rail into the side hole of the
main secon, and ghten it properly with the
help of a knob.
6
• Insert the square extension by sliding it into
the speed rail and secure it with the extension
knob by seng the posion.
• Aach the back support seat to the square ex-
tension and ghten both the bolts of the back
support seat with a 4mm Allen key.
• Insert the speed rail into the hole of the back-
side of the main secon and secure it properly
with a knob.
• Pulling the rear steering will cause the wheels
on the main secon to rotate 360° or,
releasing it will lock the wheel again.
• Manually lock and unlock the wheel brake of
the main secon with the help of a hand. As
shown in the image.
7
• Try using the push-pin buon of the wide
round extension, which will convert the size of
the dolly to a slightly narrower size.
• Aer collapsing the round extension, slide the
oor board and insert it, as shown in the im-
age.
• To narrow the size of the dolly, remove the
oorboard.
8
YOUR PROAIM GLADIATOR ACTION DOLLY
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali PROAIM Accessori video professionali
PROAIM
PROAIM Curve-120 Manuale utente
PROAIM
PROAIM JB-VG04-01 Manuale utente
PROAIM
PROAIM SJ-FRMX-04 Manuale utente
PROAIM
PROAIM P-SFT-DT-12 Manuale utente
PROAIM
PROAIM CINEMA DL-CLBS-01 Manuale utente
PROAIM
PROAIM RCSW-CM Manuale utente
PROAIM
PROAIM P-CBTR-01 Manuale utente
PROAIM
PROAIM CINEMA SJ30 Manuale utente
PROAIM
PROAIM Cinema P-W5P-BRZ Manuale utente
PROAIM
PROAIM P-FK Manuale utente
PROAIM
PROAIM Ballpro CM-BLPR-01 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM Spark P-SPK-13 Manuale utente
PROAIM
PROAIM P-FLER-01 Manuale utente
PROAIM
PROAIM P-RVMT-01 Manuale utente
PROAIM
PROAIM DL-SPIN-01 Manuale utente
PROAIM
PROAIM CINEMA Series Manuale utente
PROAIM
PROAIM P-HN-DMC Manuale utente
PROAIM
PROAIM P-WV-2SD Manuale utente
PROAIM
PROAIM ATLS-HAP Manuale utente
