Curtis MP25 Manuale utente
Portable MP3 Player MP257
User's Guide
Introduction
Installing the MP3 Player
Transfer data to and from the MP3 Player
Listening to your WMA/MP3 music
MP3 Player Controls
LCD Display
Voice Recorder
Hold Function
Navigation
Advanced Settings
Upgrade the Firmware
Removing the MP3 Player from your computer
Trouble Shootings
Specifications
Safety
Introducing the MP257 MP3 Player
The MP3 Player incorporates a portable WMA/MP3 Player, Voice Recorder and USB 2.0 Mass
Storage Device.
MP3 Player Features:
• WMA/MP3 player.
• Synchronous lyric display with WMA/MP3 music.
• Voice recorder.
• WMA DRM support.
• USB mass storage device.
• Integrated USB connector.
• Backlit display.
• Superb audio quality.
• No cable required.
• Requires 1 AAA / LR03 battery (supplied).
System support:
• Supports Windows Me/2000/XP.
Note for Windows Me/2000/XP users: Installation of the MP3 Player drivers is required only
if you wish to upgrade the firmware of the player.
Note for Windows 2000 users: Windows Service Pack 3 must be installed before installing
MP3 Player drivers.
• Supports Windows 98 SE after installation of drivers (see below).
• Supports Mac OS X (version 10.2.6 or above) without driver.
Note:
•
To minimize static electricity, avoid operating the player in an extremely dry environment.
•
Under the environment with electrostatic discharge, the product may malfunction and
requirement user to reset the product.
Installing the MP3 Player
Installation of drivers for computers using Windows Me/2000/XP is not necessary.
Note for Windows Me/2000/XP users: Installation of the MP3 Player drivers is required only if you
wish to upgrade the firmware of the player.
Note for Windows 2000 users: Windows Service Pack 3 must be installed before installing MP3
Player drivers.
Windows 98 SE users will need to install the MP3 Player on their system:
1. Click on the link below to open the folder containing the MP3 Player installation program.
2. Click on the Setup icon to begin the installation.
3. Follow the on-screen instructions to complete the installation.
Click here to install the MP3 Player driver
Transfer data to and from the MP3 Player.
1. Make sure that the MP3 Player is turned off.
2. Remove the USB port cover & disconnect the earphone.
3. Plug the MP3 Player into the USB port of your computer. The
built-in LCD displays "READY", indicating that the MP3
Player is in USB mode. The MP3 Player is then automatically
recognized (in 'My Computer') as a removable media device.
4. Transfer files to or from the internal Flash RAM using
Windows explorer.
5. Unplug the MP3 Player from your computer (click here to see
how to do this safely), WMA/MP3 files can now be listened to
and all data stored can be transferred to another computer.
Listen to WMA/MP3 music files with the MP3 Player
1. Follow the instructions for the transfer of data to and from the MP3 Player to copy WMA/MP3
music files to the MP3 Player.
2. Install 1 AAA/LR03 battery into the battery compartment.
3. Connect the supplied headphones to the headphone socket.
4. Press the Play button.
5. Use the MP3 Player controls to adjust playback and volume level to listen to your WMA/MP3
music.
Note: Installing the battery:
1. Push and slide out the battery compartment door.
2. Install the battery.
Lyric display function
The MP3 Player supports lyric files in LRC format.
1. Prepare a MP3 or WMA music, for example, happymusic.mp3;
2. Download a lyric file from internet. The lyric file must have to be with an extension file name LRC.
For example, happymusic-2004.lrc.
3. Rename the lyric file. For example, happymusic.lrc. It is to make sure the lyric filename is same as
the corrosponding music filename.
4. Copy the lyric file & music file to the MP3 player.
5. Disconnect the MP3 player.
6. Use Skip buttons to select the music file, for example, abc.mp3. Press Play button to play.
7. The LRC icon would appears, and the lyric would display Synchronously on LCD while the music is
being playback.
Note: The MP3 player supports LRC format only.
Note: If the lyric does not synchronize with the music, please download one better lyric file from
internet and try again.
Note: Make sure the MP3 music and LRC file is located in same directory and the filename is
same. If not, the MP3 player can not recognize the lyric file.
MP3 Player Controls
A. USB Port Cover
B. Headphone
Socket
C. A-B / Menu
Button
D. Skip Next / Fast
Forward
E. Skip Previous /
Fast Rewind
F. Power Off/Stop
G. Power
On/Play/Pause
H. Hold Switch
I. Volume Down
J. Volume Up
K. Microphone
LCD Display
a. Track Number /
Total Tracks
b. Repeat all
c. Shuffle
d. Hold
e. Play/Pause/Stop/Rec.
f. Music Type
(MP3/WMA/WAV)
g. ID3 Tag (track
name) display
h. Elapsed Time/ Track
Time
i. Music Mode/ Voice
Mode
j. Repeat one
k. Equaliser
l. Battery Indicator
m. Volume
n. A-B Repeat
Voice Recorder
Record voice
1. Select Record in the LCD menu list to begin recording.
2. Press the Stop or Menu button to stop the recording and enter Voice mode.
The voice recording will have been saved as a file named Vxxx.WAV in the Voice folder.
Note that the LCD display will read MEMORY FULL when all available memory has been used.
Playback voice
This operation is similar to the playback of music.
1. Select Voice in the LCD menu to enter Voice mode.
2. Select a recording to listen to by pressing the Skip buttons.
3. Press the Play button to playback the recording.
Hold Function
Use the Hold function to deactivate the MP3 Player controls (to avoid accidental activation).
1. To activate the Hold function, slide the Hold switch.
2. Slide the Hold switch back to turn off the Hold function.
Note: The MP3 Player will turn off automatically if the key is hold when turning on the power.
Navigation
Use [Menu] button to enter Menu.
1 Select [Navigation] and press Menu button to enter navigation mode.
1.1 Line 1: Folder icon / MP3 music icon / WMA music icon / WAV file icon / Upper directory
icon
1.2 Line 2: Filename / Folder name / Return to previous level
2 Use [Skip] button to select a file or folder and use Play button to play the music or enter the folder.
3 Use Stop button in Navigation mode to backward to upper level.
Navigation…continued
Note: When a folder is selected in navigation mode, press on Menu button, a sub-menu window will pop-
up. To enter the folder, select Enter. To play music located in the folder, select Play.
When a file is selected in navigation mode, press on Menu button, a sub-menu window will pop-up. To play
this file, select Play. To erase, select Delete.
• Note: The player supports music files & folders up to 240 maximally.
• Note: The player supports folders up to 13 levels maximally.
• Note: If the number of total music files (WMA/MP3/WMA format only) and/or folders exceeds 240,
or the folder is more than 13 levels, some files/folders would be ignored.
Advanced Settings
To navigate the settings menu.
1. Press & hold the A-B/Menu button for a while
and release it to enter the settings menu.
2. Press the Skip buttons to choose a setting.
3. Press the A-B/Menu button to select that
setting.
4. After setting is finished, press & hold the A-
B/Menu button for a while and release it to exit
the Menu.
Equalizer Setting
The Equalizer (Eq) setting is to adjust the music playback effect. There are six Eq presets
available: Normal, X-Bass, Rock, Jazz, Classical and Pop.
1. Select Equalizer in the settings menu.
2. Press the Skip buttons to select a preset Eq.
3. Press the A-B/Menu button to activate.
Play mode Setting
The available Play modes are:
• Normal
• Repeat Track
• Repeat All
• Shuffle
• Shuffle Repeat
1. In the settings menu, select Play Mode.
2. Press the Skip buttons to select a play mode.
Adjust LCD Contrast
To adjust the LCD contrast
1. In the settings menu, select Contrast.
2. Press the Skip buttons to adjust the contrast
level.
3. Press the A-B/Menu button to go back to setting
menu.
Backlight
To adjust the backlight
1. In the settings menu, select Back Light.
2. Press the Skip buttons to adjust the delay before
the backlight is switched off.
Note: Selecting "Disable" would turn off the
backlight. Selecting "On" would always turn on the
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Curtis Lettore MP3
Curtis
Curtis MP1004 Manuale utente
Curtis
Curtis MPS2015UKA Your pocket Manuale utente
Curtis
Curtis MP514 Manuale utente
Curtis
Curtis MPK2050 Manuale utente
Curtis
Curtis MP257 Manuale utente
Curtis
Curtis MPK1041 Manuale utente
Curtis
Curtis MP3512 Manuale utente
Curtis
Curtis MPK1066UK Manuale utente
Curtis
Curtis MPK4066UK Manuale utente
Curtis
Curtis MP1004 Manuale utente
Curtis
Curtis MP4212 Manuale utente
Curtis
Curtis MPK2066UK Manuale utente
Curtis
Curtis MPS533 Manuale utente
Curtis
Curtis MP1000 Manuale utente
Curtis
Curtis MPK8955UK Manuale utente
Curtis
Curtis MPK1021 Manuale utente
Curtis
Curtis MPK7836UK Manuale utente
Curtis
Curtis MP228 Manuale utente
Curtis
Curtis MP2021 Manuale utente
Curtis
Curtis MP3257B Manuale utente
