Custom Dynamics TruWrapz Manuale utente

Indice

Altri manuali Custom Dynamics Accessori per motociclette

Custom Dynamics

Custom Dynamics CD-LR-04-R Manuale utente

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Manuale utente

Custom Dynamics

Custom Dynamics PROBEAM PB-SS-KIT2 Manuale utente

Custom Dynamics

Custom Dynamics Street Magic Amber Brightsides Guida alla configurazione

Custom Dynamics

Custom Dynamics ProBEAM PB-BCM-KIT1 Manuale utente

Custom Dynamics

Custom Dynamics ProBEAM Dynamic Strips Manuale utente

Custom Dynamics

Custom Dynamics Road Glide CD-RG-TS-15-B Manuale utente

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Manuale utente

Custom Dynamics

Custom Dynamics MAGIC-STROBES-HD Manuale utente

Custom Dynamics

Custom Dynamics CD-RG-V-AW2-B Manuale utente

Custom Dynamics

Custom Dynamics ProBEAM PB-SCOUT-RR-BR Manuale utente

Custom Dynamics

Custom Dynamics GEN-SMART-TPU -IND Manuale utente

Custom Dynamics

Custom Dynamics Magic Strobes Manuale utente

Custom Dynamics

Custom Dynamics Street Magic RT Scuff Guard Guida alla configurazione

Custom Dynamics

Custom Dynamics Dynamic Strips CD-DS-ST-B Manuale utente

Custom Dynamics

Custom Dynamics MAGIC STROBES Manuale utente

Custom Dynamics

Custom Dynamics TruBEAM CDTB-45-AW-3B Manuale utente

Custom Dynamics

Custom Dynamics MagicFLEX2 Indian LED War Bonnet Light Kit Manuale di servizio

Custom Dynamics

Custom Dynamics Smart Triple Play GEN-SMART-TPU-SS8 Manuale utente

Custom Dynamics

Custom Dynamics Street Magic M109 Manuale utente

Custom Dynamics

Custom Dynamics CD-FORK-BCM-AB Manuale utente

Custom Dynamics

Custom Dynamics MAGIC-STROBES-SS6 Manuale utente

Manuali Accessori per motociclette popolari di altre marche

SRC

SRC B-TRK502-01-01-SL Manuale utente

3M

3M Speedglas 9100 MP Manuale utente

hepco & becker

hepco & becker 6307520 00 01 Manuale utente

HOMCOM

HOMCOM AA0-077 Manuale utente

hepco & becker

hepco & becker 6307558 00 01 Manuale utente

Wunderkind Custom

Wunderkind Custom 106503-F15 Guida utente

Dräger

Dräger HPS 3500 Manuale utente

M-WAVE

M-WAVE SKI Manuale utente

Kuryakyn

Kuryakyn 6212 Manuale utente

hepco & becker

hepco & becker 6507504 00 01 Manuale utente

Tool it

Tool it PROMAX LCD 9.13G Manuale utente

Roof

Roof RO200 CARBON Manuale utente

Kabuto

Kabuto Japan IBUKI Manuale utente

PUIG

PUIG 5051 Manuale utente

rizoma

rizoma ZTH050 Manuale utente

Joubert

Joubert 10001711 Manuale utente

Sperian

Sperian Optrel p420 Manuale utente

SW-Motech

SW-Motech SBL.01.971.10000/B Manuale utente

Yamaha Stryker TruWrapz® Installation Instructions.

1) Using a suitable motorcycle frame jack support the motorcycle until the front wheel is

just barley touching the ground and all weight has been removed from it by following

jack manufacturers instructions for proper jack usage.

2) Once properly supported remove the headlight by removing the screws on each side of

the head light bucket

3) Following the instructions contained within the TrueWrapz package, install the

TruWrapz® onto each fork tube and route their wires inside the headlight bucket.

4) Once installed and the wires are routed, locate the connector for the right side turn signal

and use the supplied Posi-Tap connector to tap into the right side turn signal wire. This

wire should be a GREEN WIRE WITH YELLOW DOTS ON IT. If there is any

confusion use a test light to confirm which wire is the turn signal wire. (see pic #23)

5) Next repeat this procedure for the left side turn signal wire which should be a BROWN

WIRE WITH YELLOW DOTS on it.

6) Next using ether turn signal connector harness attaches a Posi-Tap connector onto the

blue wire and a Posi-Tap onto the black wire.

7) Using one of the 2 supplied Eclipze™units, take the orange wire from the 3 wire end of

the Eclipze unit and hook it into the Posi-Tap connector going to the right side turn signal

wire.(green wire with yellow dots) (see pic #23)

8) Next take the same orange wire from the remaining Eclipze™and hook it into the Posi-

Tap connector going to the left side Turn signal wire (brown with yellow dots)

9) Take the two red wires from the 3 wire end of both the Eclipze™units and twist them

together then attach them to the Posi-Tap connector going to the running light circuit

which is the BLUE wire. (see pic# 24)

10)Then take the two black wires coming from the 3 wire end of the 2 Eclipze™units twist

them together and attach them to the Posi-Tap connector going to the black wire. (see pic

# 25)

11)Next, take the two wires coming from the TruWrapz® on the left side and hook them

onto the two output wires coming from the Eclipze™unit hooked to the left side turn

signal connector as follows. Yellow wire from TruWrapz® to the red output wire from

Notice: This product is designed and intended for use as auxiliary lighting on motorcycles only. This

product is NOT intended to replace any original equipment lighting installed on the motorcycle and

should not be used for that purpose. This product must be wired such that it does not interfere with any

original equipment lighting.

Eclipze™unit. The black wire from the TrueWrapz to the black wire from the output

side of the Eclipze™unit. Repeat this procedure for the right side wires as needed. (see

pic # 26)

12)Turn on the bike and check the operation of both the running light function and turn

signal function. (see pics #37 & #38)

13)Reinstall headlight into bucket once proper operation is observed.

Picture #23

Picture #24 Picture #25

Picture #26 Picture #37

Picture #38