Customizer URC-300 Manuale utente

Owner’s

Manual

The information in this manual is copyright protected. No part of this manual may

be copied or reproduced in any form without prior written consent from Universal

Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE

LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS

MADE IN THIS MANUAL. The information in this manual may be subject to

change without prior notice. Customizer is a registered trademark of Universal

Remote Control, Inc. Power of Simple is a trademark of Universal Remote Control,

Inc. DoubleTap Learning is a trademark of Universal Remote Control, Inc. All other

brand or product names are trademarks or registered trademarks of their respective

companies or organizations.

500 Mamaroneck Avenue, Harrison, NY 10528

Phone: (914) 835-4484 Fax: (914) 835-4532

Thank You!

Thank you for purchasing the Customizer

URC-300 Pre-Programmed and Learning Remote

Control. The DVD tutorial supplied with the

Customizer demonstrates the process of setting

up and automating a home entertainment system.

Watch the DVD first to familiarize yourself with

the capabilities of the Customizer and the pro-

cess of programming. This manual is designed to

assist you step-by-step as you program the

Customizer to replace all of your remote controls

and automate your home entertainment system.

Table of Contents

Getting Started 2

Basic Operation 3

Basic Set Up 5

Pre-programmed Standard Method 5

Pre-programmed Scan Method 9

Learning Method 10

Punch Through Volume Control 13

Advanced Operation 15

Advanced Set Up 17

Editing Button Labels 17

Macro Button Setup 20

Favorite Channel Setup 22

Hiding/Adding Pages 24

Erasing Mistakes 26

Cloning One Customizer to Another 28

Recalling Three Digit Pre-Programmed Codes 29

Expanding Via the Expander 30

Pre-Programmed Code Notes 32

Pre-Programmed Code Tables 33

Frequently Asked Questions 48

Specifications/Warranty 49

Getting Started

Congratulations!

You’ve purchased one of the most advanced touch

screen remote controls ever made! The Customizer

comes pre-programmed with over one thousand

devices. All you have to do is set the Customizer to the

brand and model of each of your components. You’ll

find instructions for quick set up on page five.

In addition, the Customizer buttons can also learn any

button from any remote control to new to be in the

pre-programmed library of devices.

The Customizer’s many exciting advanced features will

help you enjoy the home entertainment experience. By

using Macro programming, you can power on all of

your components and start the show with the press of

one button! You can even program your favorite chan-

nels to tune in with the press of one button instead of

entering the channel number each time.

The Customizer’s features can help you make operating

your home entertainment system fun and easy for

everyone in your family.

We hope you will review this

manual carefully and take full

advantage of all the Customizer

has to offer.

Battery Installation

Remove the battery compartment

cover by pressing up the cover

lock. Insert four AAA batteries into

the battery compartment as shown

in the diagram.

The Customizer

Batteries inserted correctly.

URC-300

MAIN

Button

takes you

to the

MAIN

Menu.

Touch

the

Screen

to use

Touch

Screen

Buttons.

PAGE

numbers

of the

Device

FUNCTION

buttons

change

their

commands

whenever

a new

DEVICE

is selected.

TITLE

Device

PAGE

buttons

( )

change the

page of

buttons

displayed.

Basic Operation

The Customizer

Selecting a New DEVICE

Changes All Button Commands Instantly

The Customizer can operate fifteen different devices

even though it is only one remote control. Let’s try it

now! Press the MAIN button, then touch the TV Device

button by clicking your fingernail on the screen at TV.

The TITLE changes to TV. Now all of the buttons are

dedicated to TV functions. If you press the PAGE but-

tons, you can see that the TV DEVICE has a total of four

pages. If you go back to the MAIN Menu by pressing

the MAIN button, then select any of the other fifteen

DEVICES, each of which contains four pages total.

In the next few pages, you’ll set up the Customizer to

control all the devices in your home theater system!

Light Button

The LIGHT button will backlight all of the buttons.

Pressing it again will turn off the light, or just wait ten

seconds (the backlighting automatically shuts itself off).

DEVICE

Button

LIGHT

Button

URC-300

Basic Set Up

You can set up your Customizer using either the learning

or the pre-programmed method. Because all the buttons

are set up in one quick operation rather than one button

at a time, we recommend you start with pre-programmed

setup before you do any learning.

Pre-Programmed Standard Method

Turn on the component you wish to program (TV,

VCR, DVD, etc.)

Look up the code table shown on pages xx - xx and

take note of the three digit codes listed for your

component and brand.

Press and hold the MAIN and ENT (Enter) buttons

at the same time for approximately three seconds.

The top of the display screen will show “SET UP”.

You are in SET UP mode now.

Note: You have 30 seconds to perform a step while you are in

SET UP mode. If you don’t press a buton within that time, the

Customizer will time out and return to normal operation.

MAIN

Button

ENT

Button

Press the P-PRO button to select the

Pre-Programmed Code method.

The display will show a list of the first seven devices.

Move the blinking cursor to the device you wish

to program by using the cursor UP or cursor

DOWN button shown below, then press SELECT.

For Example: If you want to program your TV,

make “TV” blink by pressing the cursor up or

down, then press the SELECT button.

P-PRO

Button

Press either of the Page buttons ( ) to display

the second list of eight devices.

First

Seven

Devices

The Customizer

SELECT

DOWN

URC-300

The bottom of the display should now be flashing

FROM TABLE. This prompts you to select the

CODE TABLE via the Cursor and SELECT buttons.

For Example: Let’s pretend you are programming a

TV. You would find the the three digit codes for

Televisions in the TV CODE TABLE. So you would

press the cursor buttons until “TV” is flashing,

then press the SELECT button. This selects the TV

CODE TABLE. Now you are ready to test codes!

Point the remote control at the component, then

enter the first three digit code number from your

notes using the numbered buttons. Continue to

enter codes until the component powers off.

For Example: Let’s pretend you have a Sony TV. You

would find the the three digit codes 070, 139,147,

126, 185, 194 and 085 under Sony in the TV CODE

TABLE. Using the numbered buttons on the

Customizer, enter the 070 and watch the TV. If it

doesn’t turn off, enter 139, then try 147 and so on.

Note: If none of the codes turn off the component, you

should try the Scan Method (see page 9).

SELECT

Enter the

Code via

the

Numbered

Buttons

DOWN

When the component turns off, save the code

number you entered by pressing the SAVE button

that appears on the touch screen.

Exit SET UP mode by pressing the MAIN button

two times. When the display shows “MAIN”, you

are back in normal operating mode. Now it’s time

to test the all the buttons. If some buttons don’t

work, try another three digit code to see if it gives

better operation.

For Example: My Sony TV powers off with code

139. However after trying 139, not all buttons

work. I repeated steps 1 to 10 trying other code

sets and eventually discovered that the 185 code

set operates ALL my buttons.

Repeat steps one through ten for each of your

devices. In most systems, you can finish basic

programming in just a few minutes and put all

your old remote controls away. Once you are

finished all of the devices, you can move on to

page13 to set up your volume control.

If you can’t find any code that powers off a com-

ponent, try the Scan method on the next page. If

you are missing one or two commands, use the

Learning method on page 10.

SAVE

Button

Code You

Entered

The Customizer

Altri manuali per URC-300

Indice

Altri manuali Customizer Telecomando

Customizer

Customizer URC-300 Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione