CYP CDPW-K1 Manuale utente
CDPW-K1
15-Button Wall Plate Control Keypad
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
VR0 26/08/15 Preliminary release
VR1 31/03/16 Add Macro Features
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................3
6.3 Telnet Commands............................4
6.4 Software Application.......................6
6.5 Telnet Control ...................................7
6.6 WebGUI Control ...............................9
7. CONNECTION DIAGRAM..................... 19
8. Specications ...................................... 20
9. Acronyms ............................................. 20
1
1. INTRODUCTION
The Wall-Plate Control System box is a fantastic and useful design
for system installer and smart home user. With 15 direct macro
buttons and extra 15 macro in WebGUI control which allows up to
16 commands to be execute, within one push and a total of 128
commands capacity inside this box that can bring out a set of scenes
in a seconds. Soft and colorful LED design tting all environment
purpose and PoE (Power over Ethernet) function ease power supply
issue without extra DC power burden. Further, relay outputs design
and scheduling function control settings can trigger master switch or
any main switch of the installation environment that brings the world
of control to whole.
2. APPLICATIONS
• Smart Home Installation
• Control Center
• Functional Room
• Show Room
• Ballroom
3. PACKAGE CONTENTS
• 1×Wall Plate Control Keypad
• 1×USB Type A to Mini USB OTG Connector
• 2×3.5mm Terminal Block Pitch
• 1×5 V/2.6 A DC Power Adaptor
• 1×Button Stickers (60pcs)
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
Active internet connection from Hub or Router and output to DC
controllable device.
2
5. FEATURES
• 30 macro buttons with up to 128 commands to implant for control
system
• Supports Relays to control on/off of other devices
• Supports Scheduling control system and settings
• Supports Schedule memory over power blackout up to 48 hrs
• Supports daylight saving timing system
• Supports Key Pad, Telnet and WebGUI controls
• Supports PoE function or DC power supply selection
• UK 2 Gang wall plate design with adjustable LED dim light
• Multiple uses for home, hotel room central control or conference
room and etc.
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDBaseT HDMI MUTE
R/L
COAXIAL
LINE OPTICAL
Power
Volume
Dial
IR Sensor
LED
Volume
1
1
Macro Buttons 1~15: Each buttons has 2 colors of LEDs adjustable
from dim 0~100% and can be insert up to 16 commands. (Further
detail settings please refers to section 6.7 WebGUI Control.)
3
6.2 Rear Panel
DC 5V
+
R1R2
CONTROL
RELAY OUT
-
+
-
DC 5V
+
R1R2
CONTROL
RELAY OUT
-
+
-
1 2 3
1
IP Control: Connect from PC/Laptop with active internet service
or Telnet or WebGUI control with RJ-45 terminated cable. This slots
supports PoE PD 48V function which means when the connected
server/Hub support PSE 48V it can be powered without DC supply
connection.
2
DC 5V: Plug the 5V DC power adaptor included in the package
and connect to AC wall outlet for power supply.
3
RELAY OUT: Connect with device that supports DC 0~24V/5A
power or signal that supports relay function.
4
6.3 Telnet Commands
COMMAND DESCRIPTION PARAMETER
IPCONFIG Display the current IP
congure
NONE
SETIP N, N1,N2 Set Ethernet IP, net mask
and gateway address
N=IP
XXX.XXX.XXX.XXX(0~255)
N1= net mask
XXX.XXX.XXX.XXX(0~255)
N2= gateway
XXX.XXX.XXX.XXX(0~255)
SIPADDR XXX.
XXX.XXX.XXX
Set ethernet IP address XXX=0~255
SNETMASK XXX.
XXX.XXX.XXX
Set Ethernet net mask XXX=0~255
SGATEWAY XXX.
XXX.XXX.XXX
Set Ethernet gateway XXX=0~255
SIPMODE N Set Ethernet IP Mode N=STATIC/DHCP
VER Show unit rmware
version
NONE
FADEFAULT All congure set to
factory default
NONE
ETH_FADEFAULT All Ethernet congure
set to factory*
NONE
REBOOT System reboot NONE
HELP (?) Show command list NONE
HELP N Show descript of
command
N=COMMAND NAME
RELAY N N1 Relay control N (PORT)=1or 2
N1=OPEN/CLOSE/
TOGGLE
5
COMMAND DESCRIPTION PARAMETER
LEDBLUE N N1 Led blue backlight
control
N (LED NO.)=1~15
N1=% (0-100)
LEDRED N N1 Led red backlight
control
N (LED NO.)=1~15
N1=% (0-100)
LEDBLUES N All blue led backlight
control
N=% (0-100)
LEDREDS N All red led backlight
control
N=% (0-100)
LEDSHOW N Led dimming mode
control
LEDSHOW N
N=ON/OFF/TOGGLE
BACKLIGHT N All led backlight control N=% (0-100)
KEY_PRESS N
RELEASE
KEY_PRESS N
HOLD
Key press trigger type KEY_PRESS N RELEASE
(Default)
N=KEY NUMBER
KEY_PRESS N HOLD
N=PORT NUMBER
MACRO RUN N
MACRO STOP
MACRO STOP N
Macro control MACRO RUN N
N=MACRO ID (1~15)
MACRO STOP
(Stop All)
MACRO STOP N
N=MACRO ID (1~30)
Note:
1. Any commands will not be executed unless followed by a carriage
return. Commands are case-insensitive.
2. *Command reset IP address back to factory default only.
Altri manuali per CDPW-K1
1
Indice
Altri manuali CYP Tastiera
