CYP CDPW-K1S Manuale utente
CDPW-K1S
UK 1 Gang 9-Button Wall Plate Control Keypad
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2015 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
VR0 16/10/15 First release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 Telnet Commands............................5
6.4 Software Application.......................7
6.5 Telnet Control ...................................8
6.6 WebGUI Control .............................10
6.6.1 Macro Settings.............................11
6.6.2 Extension Marco..........................14
6.6.3 Command Settings.....................14
6.6.4 Schedule ......................................14
6.6.5 Network Settings..........................17
6.6.6 System Settings ............................17
6.6.7 Time Settings ................................18
7. CONNECTION DIAGRAM..................... 19
8. Specications ...................................... 20
1
1. INTRODUCTION
The Wall-Plate Control System box is a fantastic and useful design for
system installer and smart home user. With 9 direct macro buttons and
extra 9 macro in WebGUI control which allows up to 18 to be execute
within one push and a total of 128 capacity inside this box that can
bring out a set of scenes in a seconds. Soft and colorful LED design
tting all environment purpose and PoE (Power over Ethernet) function
ease power supply issue without extra DC power burden. Further, relay
outputs design and scheduling function control settings can trigger
master switch or any main switch of the installation environment that
brings the world of control to whole.
2. APPLICATIONS
• Smart Home Installation
• Control Center
• Functional Room
• Show Room
• Ballroom
3. PACKAGE CONTENTS
• Wall-Plate Control System Box
• 1 x USB Type A to Mini USB OTG Cable
• 2 x 3.5mm Terminal Block Pitch
• 1 x 5V DC Power Adaptor
• 1 x Button Stickers (28 pcs)
• Operational Manual
4. SYSTEM REQUIREMENTS
Active internet connection from Hub or Router and output to DC
controllable device.
2
5. FEATURES
• 9 macro buttons and extra 9 macro buttons in WebGUI with up to
128 commands to implant for control system
• Supports Relays to control on/off of other devices
• Supports Scheduling control system and settings
• Supports scheduling memory over power blackout up to 48hrs
• Supports Key Pad, Telnet and WebGUI controls
• Supports PoE function or DC power supply selection
• UK 1 Gang wall plate design with adjustable LED dim light
• Multiple uses for home, hotel room central control or conference
room and etc…
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PC 1
Apple TV
HDMI 1
Laptop 1 Blu-ray 1
SKYHD
System
On
System
Off
Media
Player
9
1
11~9 Macro Buttons: Each buttons has 2 colors of LEDs adjustable
from dim 0~100% and can be insert up to 16 commands.
4
6.2 Rear Panel
CONTROL
DC 5V
+
-
RELAY
OUT
2
1 3
1DC 5V: Plug the 5V DC power adaptor included in the package
and connect to AC wall outlet for power supply.
2Control: Connect from PC/Laptop with active internet service or
Telnet or WebGUI control with RJ-45 terminated cable. This slots
supports PoE PD 48V function which means when the connected
server/Hub support PSE 48v it can be powered without DC supply
connection.
3RELAY OUT: Connect with device that supports DC 0~24V/8A
power or signal that supports relay function.
5
6.3 Telnet Commands
COMMAND NAME DESCRIPTION DESCRIPTION OF PARAMETER
IPCONFIG Display The
Current IP
Congure
NONE
SIPADDR XXX.
XXX.XXX.XXX
Set Ethernet IP
Address
XXX=0~255
SNETMASK XXX.
XXX.XXX.XXX
Set Ethernet Net
Mask
XXX=0~255
SGATEWAY XXX.
XXX.XXX.XXX
Set Ethernet
Gateway
XXX=0~255
SIPMODE N SET ETHERNET IP
MODE
N=STATIC/DHCP
VER Show Unit
Firmware Version
NONE
FADEFAULT ALL CONFIGURE
and Macro SET TO
FACTORY DEFAULT
NONE
ETH_FADEFAULT ALL ETHERNET
CONFIGURE SET
TO FACTORY
NONE
REBOOT System Reboot NONE
HELP/? Show Command
List
NONE
HELP N Show Descript Of
Command
N : COMMAND NAME
RELAY N N1 RELAY CONTROL N(PORT)=1
N1=OPEN/CLOSE/TOGGLE
LEDBLUE N N1 LED BLUE
BACKLIGHT
CONTROL
N(LEN NO.)=1~8
N1=% (0-100)
Indice
Altri manuali CYP Tastiera
