CYP CDPS-UA6H2HFS Manuale utente

CDPS-UA6H2HFS

6 x 2 HDMI 4K UHD Matrix with HDCP 2.2

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack or install or

operate this equipment, and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 01/07/15 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

6.3 Remote Control................................5

6.4 IR Pin Denitions................................6

6.5 OSD Menu.........................................6

6.6 RS-232 Protocols .............................12

6.7 Telnet and RS-232 Commands .....12

6.8 Telnet Control .................................17

6.9 Web GUI Control ............................19

7. Connection Diagram .......................... 22

8. Specications ...................................... 23

1. INTRODUCTION

The 6 by 2 HDMI 4K UHD Matrix with HDCP 2.2 and Fast Switch which

allows HDMI signal from any of its 6 sources to be routed to and

displayed on any of its 2 connected HDMI displays simultaneously with

View All Mode and Picture-in-picture (PIP) supported. Fast switching

technology can greatly eliminate the time required by swapping or

turning ON/OFF the connected displays. It supports 4Kx2K, 3D, 30-

bit Deep Color, Hi-Def audio and other features dened by HDMI

specications.

The management of source/sink scenarios can be operated easily

through on-panel buttons, IR remote control, RS-232 or Ethernet

protocol.

2. APPLICATIONS

• Entertainment Room / Home Theater

• Show Room / Demo Room

• Lecture Room/Hall Presentation

• Show Room/Demo Room

• Public Commercial Display

• Information Board

3. PACKAGE CONTENTS

• 6 by 2 HDMI 4K UHD Matrix with HDCP2.2 and Fast Switching

• Remote Control with Battery

• Left & Right Rack Ears

• 5V/2.6A DC Power Adaptor

• IR Receiver Cable

• Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipment such as Blu-ray/DVD/PS3 player or Set-Top-Box

and output HDMI TV/Display and or audio amplier with connection

cables.

5. FEATURES

• HDMI with 3D & 4Kx2K supported, HDCP 2.2 and DVI compliant

• Supports 6 HDMI inputs and 2 HDMI outputs

• Displays any of 6 High-Denition sources on 2 HDTV displays

simultaneously with fast switch

• When in Preview mode, the system will be treated as Switcher (2

HDMI output same images at the same time)

• In Preview mode, it support View All (1 Main video source and 5

Sub video sources) and PIP (1 Main video source and 1 Sub video

source). 3D and 4K2K sources inputs are not supported

• Note: View All is TDM (Time Division Multiplexing display)

• 3DTV Pass-Through

• Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30 &

4096x2160 @30Hz)

• Supports Optical audio extraction

• Supports Optical audio sampling rate output up to 192kHz

• Supports data rate from 300Mbps to 3Gbps and Deep Color up to

1080p 30-bit

• Supports individual EDID or common EDID

• Supports LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH

(Pass through), Dolby TrueHD and DTS-HD Master Audio

• Supports 6 sets of Matrix preset functions for input/output setting

• Input port HDCP support Standard and Apple mode. The Apple

mode selection to guarantees the use of Apple devices

• Compliant with DVI source (Not supporting Deep color and Color

space YCbCr 422/444)

• Supports OSD on output B under Preview Mode

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

6X2 HDMI MATRIX FAST SWITCH

IN 1IN 2IN 3IN 4IN 5IN 6 MUTE

OUT A OUT B

POWER

TAKE

CANCEL

ENTER

PRESET

ALL

MODE

LOCK

1 2 4 5

6 7 8 10 14112 115

9 11 13

1Power & LED: Press the Power key to turn on the device and the

LED will illuminated.

2IR Window: IR Receiver receives remote control signal from the

remote control included in the package.

3OUTPUT A ~ B: Press these OUT buttons once along with one IN

buttons to select input source for select output display.

4IN 1~6: Press these IN buttons to select an input from 6 input

sources.

5MUTE: Press to mute audio source.

6TAKE: Press this button to conrm IN and OUT selection.

7CANCEL: Press this button to cancel IN and OUT selection.

8ENTER: Press this button to conrm selection.

9MENU: Press to enter Menu options.

10 +/-: Press to move up / down under menu options.

11 ALL: Press to select all outputs to display with one input source.

12 PRESET: Press this button, the OLED menu will show preset, then

select IN 1~6, press “TAKE” to conrm the selection or press

“CANCEL” to deselect.

13 LOCK: Press to lock all button functions on the panel, press and

hold 5 seconds to rescission lock mode.

14 MODE: Take mode / Real Time mode switch.

15 LCM: Display input and output selection and menu options.

6.2 Rear Panel

CONTROLSERVICE

HDMI IN HDMI OUT S/PDIF OUT

123456AB RS232 IR IN DC 5V

1 2 3 4 5 6 7 8

1HDMI IN: Connect from source equipment such as Blu-ray / DVD /

PS3 player, Set-Top Box or any HDMI equipped source device for

input signal sending.

2HDMI OUT: Connect to HDMI TV / display or HD amplier for output

image and audio or audio display.

3S/PDIF OUT: Connect to Audio sound system or Amplier for digital

output sound.

4SERVICE: This is reserved for rmware update use only.

5CONTROL: Connect to PC / Laptop with active internet service for

Telnet / Web GUI control with RJ-45 terminated cable.

6RS232: Connect to PC / Laptop to control the device.

7IR IN: Connect the IR receiver which contented in the package for

receive IR signal from the remote control.

8DC 5V: Connect the adapter with power cord which included in

the package and connect to AC wall outlet for power supply.

6.3 Remote Control

1POWER: Press Power key to turn on

the device or set to standby mode.

2OUT A~B: Press these OUT buttons

once then to select an input source

for an output display.

3TAKE: Press this button to conrm IN

and OUT selection.

4MODE: Press to switch to matrix or

preview mode.

Matrix mode: Press OUT A or OUT B

or both then select from INPUT 1~6

or MUTE to select input sources,

press TAKE after selection to conrm

or press CANCEL to undo.

Preview mode: Select VIEW ALL or

PIP mode by entering Menu page.

Select to VIEW ALL: Press from INPUT 1~6 or MUTE to select input

sources for main channel.

Select to PIP mode: Press from OUT A~B then Press from INPUT 1~6

or MUTE to select input as main or sub video sources, press ALL or

SWAP to switch from main or sub video sources.

5PV DISP.: Press to switch Preview display on and off.

6SWAP: While in PIP mode, press to swap main or sub video source.

7MENU: Press to enter Menu options.

8ENTER: Press this button to conrm selection.

9+/-: Press to move up and down under menu options.

10 ALL: Press to select all outputs to display with one input source.

11 IN 1~6: Press these IN buttons to select an input from 6 input

sources.

12 CANCEL: Press this button to cancel IN and OUT selection.

13 PRESET: Press this button, the OLED menu will show preset, then

select IN 1~6, press “TAKE” to conrm the selection or press

“CANCEL” to deselect.

IN 3

IN 5

MUTEENTER -

OUT A

OUT B

MODE

PV DISP. PRESET IN 4

SWAP LOCK

ALLIN 1

TAKE IN 2

CANCEL

+MENU IN 6

CR-136

Indice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente