CYP CPLUS-V8H8HP Manuale utente

CPLUS-V8H8HP

4K UHD+8×8 HDMI Matrix

with USB Power Outputs

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

RDV1 19/09/17 Preliminary release

VS1 20/12/17 Final technical review

VS2 16/01/18 Additional input selection modes

& Updated resolution support list

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 4

6.3 Remote Control......................................... 5

6.4 LCD Menu .................................................. 6

6.5 IR Cable Pin Assignments ......................... 7

6.6 RS-232 Protocol.......................................... 7

6.7 Telnet Control ............................................ 8

6.8 RS-232 and Telnet Commands ................ 9

6.9 WebGUI Control ...................................... 22

7. Connection Diagram ....................................34

8. Specications ................................................35

8.1 Technical Specications ........................ 35

8.2 Video Specications............................... 36

9. Acronyms .......................................................37

1. INTRODUCTION

This 8 by 8 Matrix provides the ability to connect up to eight 4K

UHD HDMI sources to up to eight 4K UHD HDMI displays and freely

switch between them. This unit comes with full support for 18Gbps

(600Mhz) resolutions up to, and including 4K@60Hz (4:4:4, 8-bit) as

well as support for 16-bit Deep Color up to 1080p@60Hz, HDR (High

Dynamic Range), HD audio and other features dened by the HDMI

2.0a specication. With a comprehensive EDID management feature

that includes the ability to select between built in default EDID, EDID

copied from connected sink devices, as well as a congurable EDID,

this matrix can solve many interconnectivity problems.

This unit also features eight USB ports which supply up to 5V/1A power

for use with connected AOC (Active Optical Cable) ber cable

extenders. By using these specialized cables your HDMI content

can be extended much further than would be possible with normal

HDMI cables. The built-in OSD has the ability to display user editable

general information text so each output can display up to 2 lines of

customized text on top of the video source in the color of your choice.

This unit provides an intuitive set of front panel controls with an LCD as

well as RS-232, Telnet, WebGUI, and IR remote control options.

2. APPLICATIONS

• Smart Home Control

• Control Center

• Function Room

• Product Showroom

• Ballroom

3. PACKAGE CONTENTS

• 1×8 by 8 HDMI Matrix with USB Power Outputs

• 1×24V/6.25A DC Power Adapter

• 1×Power Cord

• 1×IR Extender Cable

• 1×Remote Control (CR-177)

• 1×Rack Mount Ears (Set of 2)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

5. FEATURES

• HDMI 2.0a and DVI 1.0 compliant

• HDCP 1.x and 2.2 compliant

• Eight HDMI inputs matrixed to eight HDMI outputs with 18Gbps

(600MHz) 4K UHD support

• Supports HD resolutions up to 3840×2160@60Hz (4:4:4, 8-bit) &

4096×2160@60Hz (4:4:4, 8-bit)

• Supports 16-bit Deep Color up to 1080p@60Hz

• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,

Bitstream, and HD Bitstream

• Supports six internal EDIDs, eight external EDIDs copied from

connected devices, and four user provided EDIDs

• Eight USB ports to supply 5V/1A power to AOC (Active Optical

Cable) ber extension cables

• OSD with user customizable information text

• Controllable via front-panel buttons with LCD, WebGUI, Telnet, RS-

232, and IR remote

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

8x8 4K UHD+ Matrix IN 1 IN 2 IN 3 IN 4

OUT A OUT B OUT C OUT D CANCEL

IN 5

OUT E

IN 6

OUT F

IN 7

OUT G

IN 8

OUT H

CONFIRM ENTER

PRESET

ALL LOCK

MUTE

1 2 3

5 7 9 11

4 6 8 10 12 13

1POWER: Press this button to power the unit on (green LED) or place

it into stand-by mode (red LED).

2IR WINDOW: Accepts IR signals from the included IR remote for

control of this unit only.

3IN 1~8 & OUT A~H: Press these buttons to congure the video

routing. Behavior depends on the selected Keypad Action Mode.

3a In Standard Mode: Press the “OUT” buttons (A~H) of the outputs

you wish to route a source to (the letters will ash in the LCD to

indicate selection). Next, press the “IN” button of the input (1~8)

you wish to route to the selected outputs. Finally, press “CONFIRM”

to conrm your selection and execute the routing change.

3b In User Mode: Press the “OUT” button (A~H) of an output you wish

to route a source to (the letter will ash in the LCD to indicate

selection). Next, press the “IN” button of the input (1~8) you wish

to route to the selected output. Repeat this process as many times

as needed to select all new routes. Finally, press “CONFIRM” to

conrm your selections and execute the routing changes.

4CONFIRM: Press this button to conrm newly made input/output

routing selections.

5CANCEL: Press this button to cancel newly made input/output

routing selections before they have been conrmed.

6ENTER: Press to conrm a selection within the LCD menu or to go

deeper into a menu item.

7MENU: Press to enter the LCD menu, or to back out from menu

items.

8 PLUS (+) & MINUS (−): Press to move up and down or adjust

selections within menus.

9ALL: Press this button to select all outputs simultaneously for routing.

Next, press the “IN” key of the input (1~8) you wish to route to all

outputs. Finally, press “CONFIRM” to conrm your selection and

execute the routing change.

10 PRESET: Press to enter the preset recall menu in the LCD window.

Press the “+/-” buttons followed by the “ENTER” button to select

and activate the preferred preset.

11 LOCK: Press to lock all button functions on the front panel. Press

and hold for 3 seconds to release the lock function. The LCD will

display “Lock” when the function is active.

12 MUTE: The “MUTE” button functions as a blank audio/video source.

To use it, follow the standard matrix routing instructions, but use

the “MUTE” button as the input to blank out the selected outputs.

When a “MUTE” input is in use it will show up as “M” within the

routing display.

13 LCD WINDOW: Displays the unit’s menu, settings and information.

6.2 Rear Panel

12345678

HDMI IN ABCDEFGH

HDMI OUT

USB 5V/1A OUT

12345678

CONTROL RS232 SERVICE DC 24V

IR IN

1 2

3 6

54 7 8

1HDMI IN 1~8: Connect to HDMI source equipment such as media

players, game consoles or set-top boxes.

2HDMI OUT A~H: Connect the HDMI outputs to devices such as

HDMI TVs, monitors or ampliers for digital video and audio output.

3USB POWER OUTPUT 1~ 8: Each USB port provides 5V/1A of power

intended for use with HDMI over AOC (Active Optical Cables)

ber optic video extension cables. Power on each port may be

individually enabled/disabled.

Note: If a USB device requiring more than 1A is connected, the

port will automatically shut off to prevent an overload and the red

LED will turn on.

4IR IN: Connect to the provided IR Extender to extend the IR control

range of the unit. Ensure that the remote being used is within direct

line-of-sight of the IR Extender.

5CONTROL: Connect directly, or through a network switch, to your

PC/laptop to control the unit via Telnet/WebGUI.

6RS-232: Connect directly to a PC, laptop or other serial control

device to send RS-232 commands to control the unit.

7SERVICE: This slot is reserved for rmware update use only.

8DC 24V: Plug the 24V DC power adapter into the unit and connect

it to an AC wall outlet for power.

6.3 Remote Control

1POWER: Press to power the unit on or place

it into stand-by mode.

21/A ~ 8/H: Press these keys to congure the

video routing. Behavior depends on the

selected Keypad Action Mode.

2a In Standard Mode: Press the “OUT” key

followed by the keys (A~H) of the outputs

you wish to route to. Next, press the “IN”

key followed by the input (1~8) you wish to

route to the selected outputs. Finally, press

“ENTER” to conrm your selection.

2b In User Mode: Press the “OUT” key followed by the key (A~H) of the

output you wish to route to. Next, press the “IN” key followed by

the input (1~8) you wish to route to the selected output. Repeat

this process as many times as needed. Finally, press “ENTER” to

conrm your selection.

3INFO: Switches the information displayed on each output’s OSD

between the user customized text and the current video/Ethernet

details.

4MUTE: The “MUTE” button functions as a blank audio/video source.

To use it, follow the standard matrix routing instructions, but use the

“MUTE” button as the input to blank out the selected outputs.

5PRESET: Press to enter the preset call menu in the LCD window.

Press the “+/-” buttons followed by the “ENTER” button to select

and activate the preferred preset.

6ALL: Press this key to select all outputs simultaneously for routing.

PRESET

ALL

INFO

MUTE

- /

OUT

+ /

ENTER

CANCELMENU

CR-177

1 / A

2 / B

3 / C

4 / D8/ H

5 / E

6 / F

7 / G

Altri manuali per CPLUS-V8H8HP

Indice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente