CYP CPLUS-1082VA Manuale utente

CPLUS-1082VA

4K UHD+ 10×10 HDMI/HDBaseT Matrix

with AVLC & Audio Matrixing

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document are

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

VERSION HISTORY

REVISION DATE SUMMARY OF CHANGE

VS1 22/11/18 Final technical review

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................2

3. Package Contents ..........................................2

4. System Requirements......................................2

5. Features............................................................3

6. Operation Controls and Functions.................5

6.1 Front Panel ................................................. 5

6.2 Rear Panel.................................................. 7

6.3 Side Panel .................................................. 9

6.4 Remote Control....................................... 10

6.5 IR Cable Pinouts ...................................... 11

6.6 OLED Menu .............................................. 11

6.7 WebGUI Control ...................................... 16

6.7.1 Video Switch Tab ........................... 18

6.7.2 Zone Audio Tab.............................. 25

6.7.3 Extended Audio Tab...................... 27

6.7.4 CAT Audio Tab ............................... 29

6.7.5 HDMI Audio Tab ............................. 30

6.7.6 HDBaseT Audio Tab ....................... 32

6.7.7 Mixer Audio Tab ............................. 34

6.7.8 Zone A/V Pairing Tab..................... 36

6.7.9 EDID Settings Tab ........................... 38

6.7.10 HDBaseT & H/W Info Tab ............. 41

6.7.11 System Settings Tab ..................... 42

6.8 RS-232 Control ......................................... 44

6.9 Telnet Control .......................................... 44

6.10 RS-232 and Telnet Commands ............ 45

6.10.1 Command Syntax........................ 45

6.10.2 Real World Command Use ......... 48

6.10.3 Full Command List........................ 52

7. Connection Diagram ....................................80

8. Specications ................................................81

8.1 Technical Specications ........................ 81

8.2 Video Specications............................... 82

8.3 Audio Specications............................... 83

8.3.1 Analog Audio ................................. 83

8.3.2 Analog Audio Adjustments........... 83

8.3.3 Digital Audio................................... 84

8.4 Cable Specications .............................. 85

8.5 HDBaseT Features.................................... 86

9. Acronyms .......................................................87

1. INTRODUCTION

This 10×10 HDMI/HDBaseT Matrix supports routing and transmission of

video (resolutions up to 4K@60Hz w/ HDMI 2.0 & HDCP 2.2) and audio

(multi-channel digital/stereo analog) while providing exible control

via IR, RS-232, Telnet or WebGUI. As many as ten UHD sources may be

routed to any of eight HDBaseT outputs (up to 100m at 1080p or up

to 70m at 4K) or two HDMI outputs at resolutions up to 4K@60Hz (8-bit,

Despite HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video

sources, up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12-bit

sources with HDR, are able to be processed and extended by the use

of AVLC (Adaptive Visually Lossless Compression) when needed. The

HDMI outputs can also be set to mirror any of the HDBaseT outputs for

local monitoring.

Beyond basic video routing, this unit also incorporates an independent

audio matrix with 14 audio outputs and 10 audio inputs. Offering

discrete audio routing, insertion and extraction, this product makes

it easy to have multiple audio zones within your installation. Four

additional analog audio outputs are available to provide stereo

breakout audio from the associated HDBaseT output (LPCM 2.0 only).

This unit also contains 3 independent audio mixers allowing for the

addition of music or a voice over to existing audio and video (LPCM

2.0 only). This product supports the OAR (Optical Audio Return)

feature, found on compatible HDBaseT receivers, allowing optical

audio sources connected to those receivers to be sent back to the

matrix unit for redirection. All HDMI and HDBaseT ports support up to

7.1 channel LPCM digital audio as well as Bitstream and HD Bitstream

audio formats.

Integrated LAN support allows your 100BaseT network to be extended

across compatible HDBaseT Receivers to smart TVs or projectors.

Internally generated test patterns (up to 1080p) are provided to assist

with setup, providing a simple way to verify both matrix and sink

functionality. The PoH (Power over HDBaseT) functionality provides

remote power to compatible HDBaseT Receivers, providing greater

exibility in your installations. Control is via front panel buttons with

OLED menu, WebGUI, Telnet, RS-232 or IR remote.

2. APPLICATIONS

• Full audio/video matrix systems

• Residential AV matrix installations

• Commercial AV matrix installations

• Security systems

• University lecture hall systems

• Retail installation system

3. PACKAGE CONTENTS

• 1×HDMI/Audio over HDBaseT Matrix

• 2×24V/6.25A DC Power Adapter

• 2×Power Cord

• 2×3.5mm to IR Extender Cable

• 2×3.5mm to IR Blaster Cable

• 1×Remote Control (CR-163)

• 1×Rackmount Ears (Set of 2)

• 1×Detachable Handles (Set of 2)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• HDBaseT receivers equipped with AVLC (Adaptive Visually Lossless

Compression) and OAR (Optical Audio Return) support are strongly

recommended.

• The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly

recommended.

• The use of “Premium High Speed HDMI” cables is highly

recommended. Compatible display equipment is also required.

5. FEATURES

• HDMI with HDR & 4K@60Hz support, DVI 1.0 compatible

• HDCP 1.x and HDCP 2.2 compliant

• Routes ten HDMI sources to ten displays using eight HDBaseT outputs

and two independent or mirrored HDMI outputs

• Supports up to 4K UHD (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input

and output

• Supports Deep Color input and output up to 12-bit

• Supports 10-bit and 12-bit HDR bypass

• Integrated AVLC (Adaptive Visually Lossless Compression) activates

when the bandwidth requirements of the source are beyond

10.2Gbps (340MHz) allowing for support of sources up to 18Gbps

(600MHz) with no loss of visual quality via compatible HDBaseT

Receivers

• Supports automatic 4K@60Hz (4:4:4) to 4K@60Hz (4:2:0) and 10/12-

bit color to 8-bit color conversion when connected to non-AVLC

HDBaseT Receivers

• Supports automatic 4K (4:4:4) to 1080p scaling over the HDBaseT

outputs when connected to displays that can't support 4K

resolutions

• Supported HDBaseT feature set: HD Video & Audio, 100BaseT

Ethernet, 48V PoH, and Control (Bidirectional IR/RS-232 pass through)

• All HDBaseT outputs support OAR (Optical Audio Return)

• 4K signals can be transmitted up to 70m via Cat.5e/6 and up to

100m via Cat.6a/7

• Supports pass-through of these standard digital audio formats via

HDMI/HDBaseT: LPCM 2.0/5.1/7.1, Bitstream, and HD Bitstream

• Supports audio matrix functionality enabling full audio management

of the system including HDBaseT audio selection, fully independent

audio-only zones and HDMI audio embedding and de-embedding

(LPCM only)

• Advanced DAC (Digital to Analog Conversion) and ADC (Analog

to Digital Conversion) for audio integration

• Supports integrated audio over CAT inputs and outputs for

transmission up to 300m

• Supports volume, treble, bass, and audio delay for lip-sync (up to

230ms) on analog audio outputs and mute on all outputs

• Audio mixer functionality (three mixers in total)

• Advanced internal and external EDID management with 4 sets of

congurable EDID settings

• Internal test pattern generation (up to 1080p) for self and sink testing

• 2U rack mounted design

• Control via front panel buttons with OLED menu, Ethernet (Telnet &

WebGUI), RS-232, and IR remote

Indice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente