CYP PUV-44XPL-AVLC Manuale utente

OPERATION MANUAL

PUV-44XPL-AVLC

4x4 HDMI HDBaseT™ LITE Matrix with AVLC

& Audio De-embedding (4K, HDCP2.2, PoH, 60m)

inc. 4x PUV-1710LRX-AVLC Receiver

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 16/05/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................7

4. System Requirements ...........................7

5. Features..................................................8

6. Operation Controls and Functions.......9

6.1 Front Panel................................................... 9

6.2 Rear Panel...................................................11

6.3 Remote Control........................................13

6.4 IR Cable Pinouts .......................................14

6.5 RS-232 Pinout and Defaults.................14

6.6 OLED Menu................................................15

6.7 WebGUI Control .......................................19

6.8 Telnet Control............................................30

6.9 RS-232 and Telnet Commands............31

7. Connection Diagram .......................... 46

8. Specifications...................................... 47

8.1 Technical Specifications ........................47

8.2 Video Specifications................................48

8.3 Audio Specifications...............................50

8.4 Cable Specifications ...............................51

8.5 HDBaseT Features....................................52

9. Acronyms............................................. 53

1. INTRODUCTION

This 4×4 HDMI over HDBaseT Matrix with AVLC supports routing and

transmission of video (resolutions up to 4K@60Hz w/ HDMI 2.0 & HDCP

2.2) and audio while providing flexible control via IR, RS-232, Telnet

or WebGUI. As many as four HD sources may be routed to any of four

destinations via single runs of cable up to a distance of 70m. Despite

HDBaseT’s 10.2Gbps bandwidth limitation, 4K UHD HDMI video sources,

up to and including 4K@60Hz (4:4:4, 8-bit) as well as 10/12 bit sources

with HDR, are able to be processed and extended by the use of AVLC

(Adaptive Visually Lossless Compression) when needed. 3D video is also

supported when compatible sources and displays are connected.

This unit supports passing up to 8 channel LPCM digital audio as well as

Bitstream and HD Bitstream audio formats. Additionally, four analogue

stereo audio outputs are available to provide breakout audio from the

associated HDBaseT output (LPCM 2.0 sources only).

The included PoH (Power over HDBaseT) functionality can supply remote

power to compatible HDBaseT Receivers, providing greater flexibility in

your installations. Control is via front panel buttons with an OLED menu,

WebGUI, Telnet, RS-232 or IR remote.

2. APPLICATIONS

Full audio/video matrix systems

Residential AV matrix installations

Commercial AV matrix installations

Security systems

University lecture hall systems

Retail installation system

3. PACKAGE CONTENTS

1× 4×4 4K UHD+ HDMI over HDBaseT Matrix with AVLC

1× 24V/6.25A DC Power Adapter

1× Power Cord

2× IR Extender Cable

2× IR Blaster Cable

1× Remote Control (CR-163)

1×Shockproof Feet (Set of 4)

1× Operation Manual

4. SYSTEM REQUIREMENTS

HDMI source equipment such as media players, video game consoles

or set-top boxes.

HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

HDBaseT Receivers equipped with AVLC (Adaptive Visually Lossless

Compression) and PoH (PD) support is strongly recommended.

The use of Premium High Speed HDMI cables, and industry standard

Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

HDMI with HDR & 4K@60Hz support, DVI 1.0 compatible

HDCP 1.x and HDCP 2.2 compliant

Routes four HDMI sources to four displays using four HDBaseT outputs

Supports up to 4K UHD (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input and

output

Supports deep colour input and output up to 12-bit

Supports 10-bit and 12-bit HDR (High Dynamic Range) bypass (Output

requires AVLC receiver)

Integrated AVLC (Adaptive Visually Lossless Compression) activates

when the bandwidth requirements of the source are beyond 10.2Gbps

allowing for support of sources up to 18Gbps with no loss of visual

quality via compatible HDBaseT Receivers

Supports automatic conversion of 4K@50/60Hz (4:4:4) sources to

4K@50/60Hz (4:2:0) or 1080p50/60 for non-AVLC HDBaseT receivers or

if a connected display can’t support the original resolution.

Note: 1080p conversion is only available on outputs A & C.

Supported HDBaseT feature set: HD Video & Audio, PoH (PSE), and

Control (Bi-directional IR pass through)

4K signals can be transmitted up to 35m via Cat.5e/6 and up to 40m via

Cat.6a/7

Supports pass-through of these standard digital audio formats via

HDBaseT: LPCM (up to 8 channels), Bitstream, and HD Bitstream

High quality Digital to Analogue Conversion (DAC) of LPCM 2.0 audio

sources for local audio breakout.

Supports generation of OSD banner information

Advanced internal and external EDID management with 4 sets of

congurable EDID settings

1U rack mounted design

Control via front panel controls, Ethernet (Telnet & WebGUI), RS-232, &

IR remote

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

OUT

POWER

LOCK

1 2 3 4

98710ENTER

PRESET

/CANCEL

PUV-44XPL-AVLC

1 2 3 4 6 7 8 10

5 9

1POWER Button: Press this button to power the unit on or place it into

stand-by mode.

Note: Network functionality and PoH remains active when the unit is in

stand-by mode.

2POWER LED: This LED will illuminate green to indicate the unit is on

and receiving power. When the unit is in stand-by mode the LED will

illuminate red.

3IR Window: Accepts IR signals from the included IR remote for control

of this unit only.

4OUTPUT A~D/INPUT 1~4/NUMBER 1~10 Buttons: Press the “OUT”

button to enter output selection mode. Next, press the output keys

(A~D) of the outputs you wish to route a source to (they will flash to

indicate selection). Next, press the “IN” key followed by the input (1~4)

you wish to route to the selected outputs. Finally, press “ENTER” to

confirm your selection and execute the routing change.

For example, if you wish to display input 1 on outputs A~D then the

following sequence of button presses should be performed: OUT →A,

B, C, D →IN →1 →ENTER

Note: When directly entering Ethernet address information into the unit

all 10 buttons are used to represent the numbers from 0 to 9 (button 10 =

0) to make number entry more streamlined.

5MENU/CANCEL Button: Press to enter the OLED menu, or to back out

from menu items.

Note: For a description of the OLED menu tree, please refer to section 6.6.

6ENTER Button: Press to confirm a selection or to go deeper into a

menu item.

7+/IN Button: Inside the OLED menu, this button moves you up within

the menu tree. Otherwise, in routing mode, this button allows you to

make your input source selection.

-/OUT Button: Inside the OLED menu, this button moves you down

within the menu tree. Otherwise, this button activates routing mode

and allows you to begin your output destination selections

8PRESET Button: Press this button to recall saved presets. Press the

“Preset” button followed by a number button and the “Enter” button

to recall the stored preset assigned to that number. A maximum of 8

presets can be stored in the unit. Presets are created and stored via

the WebGUI.

Note: Please refer to section 6.7.1 for advanced preset settings.

9LOCK Button: Press this button to lock all buttons on the front panel,

or press and hold it for 3 seconds to unlock a locked front panel.

Note: The OLED will display an “L” in the upper right corner to indicate the

front panel is locked.

10 OLED Window: Displays the unit’s menu, settings and information.

Altri manuali per PUV-44XPL-AVLC

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente