CYP CMSDI-164 Manuale utente

CMSDI-164/124/84/44

16 by 4 / 12 by 4 / 8 by 4 / 4 by 4 3G-SDI Matrix

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

VS1 23/02/12 First release

VS2 17/07/12 SDI standards updated

VR3 08/08/12 RS-232 command

CONTENTS

1. Introduction..................................................1

2. Applications.................................................1

3. Package Contents ......................................1

4. System Requirements..................................1

5. Features........................................................2

6. Operation Controls and Functions.............3

6.1 Front Panel ..............................................3

6.2 Rear Panel...............................................4

6.3 Remote Control......................................5

6.4 RS-232 Pin Assignment ...........................6

6.5 RS-232 Commands.................................6

7. Connection Diagram ..................................7

8. Specications ..............................................8

9. Acronyms .....................................................9

1. INTRODUCTION

The 3G-SDI Matrix series allows SD-SDI, HD-SDI and 3G-SDI signals

to be shown on SDI displays while ensuring high bit-rates of 2.970

Gbps to give you fast signal transmission without signal loss. For

professionals, this means that it is now easier to switch multiple 3G-SDI

signals and split display of them on up to four SDI-equipped displays

simultaneously. Additionally, these units can be controlled with the

supplied IR remote, the front panel keys or RS-232 control functions.

2. APPLICATIONS

• Video broadcasting switching display

• Professional video program display

• Film studios program monitoring

• Video program switching display

3. PACKAGE CONTENTS

• 16 by 4/12 by 4/8 by 4/4 by 4 3G-SDI Matrix

• Remote Control (CR-101)

• 5 V/2.6 A DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

Source devices with SDI (SD/HD/3G) output, display devices with SDI

Input and connected with SDI cables.

5. FEATURES

• 3G-SDI input sources can be selected and split or switched to

four 3G-SDI displays simultaneously

• Operation at 2.970 Gbps, 2.970/1.001 Gbps, 1.485 Gbps,

1.485/1.001 Gbps and 270 Mbps

• Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE

292M, SMPTE 259M-C

• Connect using other units to extend your signal over long distances

• Signal is equalized and re-clocked

• Supports signal input and output distances of up to 300 meters for

SD signals, 200 meters for HD signals and 100 meters for 3G signals

Note: Tested with Belden 1694A cable. Operating distances may

vary if used with another type of cable.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

OUTPUT ENTER

INPUT

16X4 3G SDI Matrix CMSDI-164

LOCK POWER

LOCK

1 2

4 5

LCD Monitor: This LCD monitor displays the conguration of the

input and output selections. The upper line displays the outputs A, B,

C, & D. The lower line displays each output’s selected input.

IR Receiver: Receives the IR signal from the remote control

included in the package.

OUTPUT Button: Press this button to select the output A~D the cursor

will skip to the lower line of the LCD monitor then, select an input

for highlighted output.

INPUT −/+ Button: Press − or + button to select the input sources

from 1~16, press ENTER to conrm the selection.

Note: Depending on different models, the selectable input will be

displayed on the LCD monitor.

Lock Button: Press both the '−' and 'ENTER' buttons together to lock

all the function keys on the panel. To unlock, press both buttons

again.

ENTER Button: Press this button to conrm the selection. Press both

the 'ENTER' key and '–' key together to lock all the keys on panel.

To unlock, press both the 'ENTER' key and '–' key together again to

release the locking system.

LOCK LED: This LED will illuminate in green when the key lock is

active.

POWER LED: This LED will illuminate green when the device is

switched ON. When in standby mode (Press the power key on the

remote control) the LED will turn red.

6.2 Rear Panel

RS-232

DC 5V

SDI INPUT SDI OUTPUT

1 2 3 4

DC 5V: Plug the 5V DC power supply into the unit and connect the

adaptor to AC wall outlet.

RS-232: Connect to a PC or laptop (with D-Sub 9 pin female cable)

to control the device via RS-232 commands..

SDI INPUT: Connect to the SDI source equipment such as video

camera or SDI player. The amount of input slots will depend on the

model.

MODEL INPUTS OUTPUTS

CMSDI-164 16 4

CMSDI-124 12 4

CMSDI-84 8 4

CMSDI-44 4 4

SDI OUTPUT: Connect to the SDI displays with an SDI cables for

displaying the output. It can also be connected to another SDI

converter/extender to extend the signal.

6.3 Remote Control

1POWER: Press the button to power the unit on/off.

2OUTPUT: Press an output port from A~D rst then select an input

number and press enter to conrm the selection.

3INPUT: Press the number keys to select the desired input source

from 01~16 after selecting the output then press enter to conrm

the selection.

Note: selectable inputs are dependant on the controlling device.

4ENTER: Press this button to conrm each input/output selection.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CYP Commutatore a matrice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente