CYP OR-42-4K22 Manuale utente
OR-42-4K22
4 x 2 HDMI Matrix Switcher (4K, HDCP2.2, HDMI2.0)
OPERATION MANUAL
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 28/10/2016 First release
5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3 Remote Control........................................10
6.4 WebGUI .......................................................11
6.4.1 WebGUI Control Page...................12
6.4.2 Power On/O ..................................12
6.4.3 Routing..............................................13
6.4.4 Source Detect .................................13
6.4.5 Status..................................................14
6.4.6 EDID....................................................14
6.4.7 HDCP Control ..................................15
6.4.8 Firmware Update ...........................16
6.4.9 HDMI Out Info.................................16
6.4.10 Labelling.........................................17
6.4.11 Network Setting...........................17
6.5 Telnet Control ...........................................17
6.6 RS-232 Command....................................20
7. Connection Diagram .......................... 22
8. Specications...................................... 23
8.1 Technical Specications ........................23
8.2 Support Timing Table.............................24
8.3 HDMI Cable Length.................................25
6
1. INTRODUCTION
This 4x2 HDMI Matrix Switcher is designed to enable the user to switch
between any of the four connected HDMI sources to send video and
audio to either of the two connected HDMI displays. This matrix switcher
fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant,
ensuring maximum compatibility with the latest 4K UHD sources and
displays.
The unit supports all the latest features of the HDMI2.0 specication
such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic
Range), 'Deep Color', and High Denition audio. Control is via manual
selection buttons, IR, RS-232, Telnet or Web GUI.
2. APPLICATIONS
Entertainment Room & Home Theater
Show Room & Demo Room
Class room & Lecture Hall Presentations
Public Commercial Display
3. PACKAGE CONTENTS
1 x HDMI matrix unit
1 x IR Extender with cable
1 x 5V / 2.6A DC power adaptor
1 x Remote control unit (model: CR-155)
1 x Operation Manual
4. SYSTEM REQUIREMENTS
HDMI source equipment such as media players, video game consoles
or set-top boxes.
HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
The use of“Premium High Speed HDMI” cables is highly recommended.
7
5. FEATURES
HDMI2.0 and HDCP2.2 compliant
Routes four HDMI sources to two HDMI displays
Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby
Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and
DTS-HD Master Audio
4K UHD resolutions (4K2K@60Hz - YUV4:4:4)
Supports HDR (High Dynamic Range) and Deep Colour
8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWERA
A
1
2
3
4
1
2
3
4
B
BH
DMI IN
HDMI IN / OUT
1
1 2 3 4 5 6
1IR window: Accepts IR signals from the included IR remote for control
of this unit only.
2POWER: Press this button to power on the unit or place it into stand-
by mode.
Note: Ethernet and RS-232 remain active while the unit is in stand-by
mode.
3Power indicator: This LED will illuminate GREEN to indicate the unit
is on and receiving power. When the unit is in stand-by mode the LED
will illuminate RED.
4HDMI Out routing buttons“A” & “B”: Press either of these buttons
to sequentially switch through the available inputs for the associated
output.
5HDMI In indicator “1&2&3&4”: The LED in each column will
illuminate GREEN to indicate which source is currently selected for
each output
6HDMI In: Connect to HDMI source equipment such as a media player,
game console or set-top box. DVI sources are also supported with the
use of an HDMI to DVI adapter.
9
6.2 Rear Panel
234AB
HDMI IN HDMI OUT SERVICE CONTROL RS-232 IR IN DC 5V
1 2 3 4 5 6 7
1HDMI In : Connect to HDMI source equipment such as a media player,
game console or set-top box. DVI sources are also supported with the
use of an HDMI to DVI adapter
2HDMI Out: Connect to HDMI TVs, monitors or ampliers for digital
video and audio output. DVI sources are also supported with the use
of an HDMI to DVI adapter
3SERVICE: This slot (USB 2.0) is reserved for rmware update use only.
Please plug in a USB thumb drive containing the new rmware to
update the unit.
4CONTROL: Connect directly, or through a network switch, to your PC/
laptop to control the unit via telnet/WebGUI.
5RS-232: Connect directly to your PC/laptop to send RS-232 commands
to control the unit.
6IR IN: Connect to the provided IR Extender to extend the IR control
range of the unit. Ensure that the remote being used is within direct
line-of-sight of the IR Extender.
7DC 5V: Plug the 5V DC power adapter into the unit and connect it to
an AC wall outlet for power.
10
6.3 Remote Control
1POWER: Press Power key to turn on the
device or set to standby mode.
2OUTPUT A1~A4 & B1~B4:Press these
buttons to change the routing of output A/B.
CR-155
POWER
1
2
3
4
1
2
3
4
BA
1
2
Indice
Altri manuali CYP Commutatore a matrice
CYP
CYP CPLUS-1082VA Manuale utente
CYP
CYP OR-IR44 Manuale utente
CYP
CYP CPLUS-V4H4HPA Manuale utente
CYP
CYP OR-44U-4K22 Manuale utente
CYP
CYP CFSW-51MHL Manuale utente
CYP
CYP CPLUS-1082CVEA Manuale utente
CYP
CYP OR-HD88HC Manuale utente
CYP
CYP CPLUS-V32USBC Manuale utente
CYP
CYP PUV-44XPL-4K22-KIT Manuale utente
CYP
CYP PU-424HBTL-KIT Manuale utente
CYP
CYP CPLUS-662CVAL Manuale utente
CYP
CYP CMPRO-U4H4CVPL Manuale utente
CYP
CYP EL-42M-PIP Manuale utente
CYP
CYP PUV-442-4K22 Manuale utente
CYP
CYP CMSDI-1616S Manuale utente
CYP
CYP HDBT PU-4H4HBTE-4K Manuale utente
CYP
CYP CMPRO-U4H4CVE Manuale utente
CYP
CYP CMSI-8H8HC Manuale utente
CYP
CYP Elpro Video Labs CDPS-UC4H4HFS Manuale utente
CYP
CYP MOD-32 Manuale utente
