CYP CPLUS-662CVEA Manuale utente

CPLUS-662CVEA

6×8 HDMI and HDBaseT Matrix

with Audio Matrixing & LAN Serving

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

RDV1 14/01/17 Draft

RDV2 10/03/17 Updated text/diagrams

RDV3 14/03/17 Corrections to section 8.1

RDV4 20/03/17 Corrections to section 6.8.3

RDV5 18/04/17 Corrections to section 6.4

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................2

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................4

6.1 Front Panel ................................................. 4

6.2 Rear Panel.................................................. 5

6.3 Side Panel .................................................. 8

6.4 Remote Control......................................... 9

6.5 OLED Menu .............................................. 10

6.6 IR Cable Pin Assignment......................... 11

6.7 RS-232 Protocol........................................ 11

6.8 RS-232 and Telnet Commands .............. 12

6.8.1 Command Syntax.......................... 12

6.8.2 Real World Command Use ........... 14

6.8.3 Full Command List.......................... 17

6.9 Telnet Control .......................................... 32

6.10 WebGUI Control .................................... 34

6.10.1 Video Switch................................. 36

6.10.2 Zone Audio ................................... 41

6.10.3 Extended Audio ........................... 43

6.10.4 HDMI Audio................................... 44

6.10.5 HDBaseT Audio............................. 45

6.10.6 Zone A/V Pairing .......................... 47

6.10.7 EDID Settings................................. 48

6.10.8 HDBaseT & H/W Info..................... 50

6.10.9 User Cong ................................... 51

6.10.10 System Settings........................... 51

6.10.11 Logout ......................................... 52

7. Connection Diagram ....................................53

8. Specications ................................................54

8.1 Technical Specications ........................ 54

8.2 Video Specications............................... 55

8.2.1 Supported HDMI Resolutions ........ 55

8.2.2 Maximum HDMI Cable Length..... 56

8.3 Audio Specications............................... 56

8.3.1 Analog Audio ................................. 56

8.3.2 Linear PCM Audio .......................... 57

8.3.3 Compressed Audio........................ 57

8.3.4 Audio Adjustments......................... 57

8.4 Category Cable Specications............. 58

8.5 HDBaseT Features.................................... 58

9. Acronyms .......................................................59

1. INTRODUCTION

This 6×8 HDMI and HDBaseT Matrix supports routing and transmission of

video (resolutions up to 4K@60Hz w/ HDMI 2.0 & HDCP 2.2) and audio

(multi-channel digital/stereo analog) while providing exible control

via IR, RS-232, Telnet or WebGUI. As many as six UltraHD sources may

be routed to any of eight destinations, six via single Cat.5e/6/7 cables

(up to 100m at 1080p or up to 60m at 4K@30Hz) and two via HDMI

2.0 outputs. The two HDMI 2.0 outputs support transmission of 18Gbps

UltraHD HDMI sources (up to 4K@60Hz, 4:4:4) from any HDMI input or

they can mirror any of the HDBaseT outputs for local monitoring. 3D

video is also supported when compatible sources and displays are

connected.

This product supports passing 7.1 channel LPCM digital audio as well

as advanced bitstream and HD bitstream audio formats. Additionally,

six analog audio outputs are available to provide stereo breakout

audio from the associated HDBaseT output (LPCM 2.0 sources

only). Beyond basic video routing, this product also incorporates an

independent audio matrix with eight audio outputs and four audio

inputs. Offering discrete audio routing, insertion and extraction, this

product makes it possible to have multiple audio zones within your

installation. This product supports the Optical Audio Return (OAR)

channel feature, found on compatible HDBaseT receivers, allowing

optical audio sources connected to those receivers to be sent back

to the matrix unit.

LAN support allows your 100BaseT network to be extended to smart

TVs or game consoles. Internally generated test patterns (up to

18Gbps UHD resolutions) are provided to assist with setup, providing a

simple way to verify both matrix and sink functionality. The Power over

HDBaseT (PoH) function can power compatible receivers, providing

greater exibility in your installations. Control is via manual selection

buttons, WebGUI, Telnet, RS-232 or IR remote.

2. APPLICATIONS

• Full audio/video matrix systems

• Residential AV matrix installations

• Commercial AV matrix installations

• Security systems

• University lecture hall systems

• Retail installation systems

3. PACKAGE CONTENTS

• 1× 6 by 8 HDMI and HDBaseT Matrix with Audio Matrixing

• 1× Remote Control (CR-163)

• 2× IR Extender Cable

• 2× IR Blaster Cable

• 2× 24V/6.25A DC Power Adaptor

• 2× Power Cord

• 1× Rack Ear Set

• 1× Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI or DVI source equipment such as media players, video game

consoles, set-top boxes, PCs or laptops. DVI equipped source

devices must be connected via DVI to HDMI cables/adapters

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers

• The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly

recommended

• HDBaseT™ receivers equipped with Optical Audio Return (OAR)

channel support are strongly recommended

• The use of “Premium High Speed HDMI” cables is highly

recommended

5. FEATURES

• HDMI 2.0, HDCP 1.4 and HDCP 2.2 compliant

• Routes 6 HDMI sources to 8 displays using 6 HDBaseT outputs and 2

independent or mirrored HDMI outputs

• HDBaseT 5-Play™ convergence: High-Denition video and audio,

100BaseT Ethernet, 48v PoH (Power over HDBaseT) and control (Bi-

directional IR & RS-232 pass through)

• Supported HDBaseT resolutions: VGA~WUXGA, 480i~1080p,

4K@24/25/30Hz (RGB, YUV 4:4:4 & YUV 4:2:2) & 4K@60Hz (YUV 4:2:0)

dependent upon the output display’s EDID settings

• Supports HDMI output resolutions up to 4K@60Hz (RGB/YUV 4:4:4)

• Supports automatic 4K@60Hz RGB/YUV 4:4:4 to YUV 4:2:0 conversion

for HDBaseT outputs

• 4K@30Hz signals can be transmitted up to 60m via Cat.5e/6 and up

to 100m via Cat.6a/7

• Supports pass-through of all standard digital audio formats: LPCM

2.0/5.1/7.1, bitstream, and HD bitstream

• Supports audio matrix functionality enabling full audio management

of the system including HDBaseT audio selection, fully independent

audio-only zones and HDMI audio embedding and de-embedding

(LPCM only)

• Supports Digital to Analog Conversion (DAC) and Analog to Digital

Conversion (ADC) for audio integration

• Supports volume, treble, bass, and audio delay for lip-sync (up to

230ms) on analog audio outputs and mute on all outputs

• HDBaseT outputs with Optical Audio Return (OAR) support

• Advanced internal and external EDID management with 4 sets of

congurable EDID settings

• Internal test pattern generation for self and sink testing

• Capable of generating test signals up to 4K@60Hz

• Bi-directional IR support over HDBaseT

• Control via front panel controls, Ethernet (Telnet & WebGUI), RS-232,

& IR remote

• 2U rack mounted design

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

2.2

isolated

70M

POWER

ENTER

PRESET

/CANCEL

LOCK

A1B2C3D4E5

F6G7H8910

OUT

1 2 3 6 7 8 95 104

1POWER: Press this button to power the unit on or place it into stand-

by mode.

Note: Network functionality and PoH (if the second power supply is

connected) remain active when the unit is in stand-by mode.

2POWER LED: This LED will illuminate GREEN to indicate the unit is on

and receiving power. When the unit is in stand-by mode the LED

will illuminate RED.

3IR WINDOW: Accepts IR signals from the included IR remote for

control of this unit only.

4OUTPUT A~H & INPUT/NUMBER 1~6: Press the “OUT” button to enter

output selection mode. Next, press the output keys (A~H) of the

outputs you wish to route a source to (they will ash to indicate

selection). Next, press the “IN” key followed by the input (1~6)

you wish to route to the selected outputs. Finally, press “ENTER” to

conrm your selection and execute the routing change.

For example, if you wish to display input 1 on outputs A~D then the

following sequence of button presses should be performed: OUT →

A, B, C, D → IN → 1 → ENTER

When directly entering Ethernet address information into the unit

all 10 buttons are used to represent the numbers from 0 to 9 (button

10 = 0) to make number entry more streamlined.

5MENU/CANCEL: Press the “MENU/CANCEL” button to enter the

OLED menu, or to back out from menu items. For a description of

the menu tree, please refer to section 6.5.

6ENTER: Press this button to conrm selections.

Indice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente