CYP CMSI-8D8DS Manuale utente
CMSI-8D8DS
8 x 8 DVI Matrix
Operation Manual
Operation Manual
OR-DVI88S
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
suffi cient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 21/09/26 Preliminary Release
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................3
6.3 Side Panel .........................................4
6.4 Remote Control................................4
6.5 Remote Control................................5
6.6 RS-232 Commands...........................5
7. Specifi cations ........................................ 6
8. Connection and Installation................. 7
9. Acronyms ............................................... 8
1
1
1. INTRODUCTION
The 8 x 8 DVI Matrix is a fabulous device for organizing and distributing
your DVI signals. With 8 DVI input ports and 8 DVI output ports this
device allows a great amount of sources and display to be used
motivationally.
2. APPLICATIONS
• Video/TV wall display
• Commercial advertising and displaying
• Lecture room display and control
• Hyper market demonstration and control
3. PACKAGE CONTENTS
• 8 x8 DVI Matrix
• 24V/6.25A DC adaptor x 1
• Remote control x 1
• Operation manual
4. SYSTEM REQUIREMENTS
• Input source equipments with DVI connection cables and output
DVI display with DVI connection cables.
5. FEATURES
• HDMI, HDCP1.1 and DVI compliant
• Supports HDMI 3D feature (with HDMI to DVI adaptor cable)
• Supports resolutions to VGA ~ WUXGA and 480i~1080p follow by
output display’s EDID
• Supports 3D signal display follow by display TV’s EDID
• Supports DVI input up to 15 meters with 8bits resolution or 10 meters
with 12bits resolution
• Supports IR extension
• Supports RS-232, remote control and on panel control
• 2U size design
2
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 62 3 4 5
POWER LOCK
MENU OUTA 1B2C3D4
IN
E5F6G7H8
8X8 DVI MATRIX CMSI-8D8DS
1LCM:
This monitor displays your setting information with each input and
output selection.
2Power button LED:
Press this button to turn on the device and the green LED will
illuminate when the power is on. When the LED illuminate in red it is
in standby mode
3LOCK:
Press this button to lock all the buttons on the panel. To unlock, just
press it again.
4IR:
This IR window accepts the remote control signal of this device
only.
5Menu:
Press this button once to select EDID setting from STD (internal) 1 or
TV (external) 2 then press it again to confi rm the selection. Press
this button every to confi rm the selection.
61 ~8 /A ~ H & Out/In button:
Press Out/In button fi rst to select the output/input then press the
number button to make the selection accordingly. For example,
output A ~ D wish to select input 1 and E ~ H wish to select input
2. Press Out→A→B→C→D→In→1→Menu, and then press Out
→E→F→G→H→In→2→Menu. If the menu button is not press the
selection will not be changed.
1 62 3 4 5
POWER LOCK
MENU OUTA 1B2C3D4
IN
E5F6G7H8
8 x 8 DVI Matrix
3
3
6.2 Rear Panel
LAN
IR IN
RS232 SERVICE
ABCDEFFG
DVI IN
DVI OUT
12345678
DVI OUT
DC 24V
12
34
V+
GND
GND
GND
V+
12 3 4 75 6
1LAN:
This slot is to connect with CAT5/6 cable from an IP router for on-
line fi rmware updating with a website designed by the device’s
designer. Or may be a control terminal on-link from a designate IP
address.
2RS-232:
This slot is to connect with D-Sub 9pin cable from the PC/NB device
for RS-232 control.
3IR-In:
This slot is to connect with the IR extender included in the package
for IR signal receiving from the remote control of this device.
4Service:
This slot is to connect with USB cable for manufacturers’ fi rmware
update only.
5DVI OUT A~H:
These slots are to connect with display or monitor with DVI cables
for output image display.
6DVI IN 1~8:
These slots are to connect with input source equipment such
as Blu-ray player or Set-Up-Box with DVI cable or HDMI to DVI
converter cable for input signal sending.
7DC24V:
This slot is to plug the power cord with adaptor included in the
package and then connect them with AC wall outlet for power
supply.
4
4
6.3 Side Panel
1
1
Ventilator:
These are fan ventilator area, DO NOT block these area or cover it
with any object.
6.4 Remote Control
1Power:
These are fan ventilator area, DO NOT
block these area or cover it with any
object.
2IN:
Input ports selection 1~8.
3OUT:
Output ports selection A~H.
H
8
1A
B
2
3
4D
5E
6F
7G
CR-110
IN OUT
1
2 3
C
5
5
6.5 Remote Control
CMSI-8D8DS
►
◄
Remote Control Console
PIN Assignment PIN Assignment
1 NC 1 NC
2 Tx2 Rx
3 Rx3 Tx
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
Baud Rate: 19200bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1
6.6 RS-232 Commands
Command (Case Sensitive) Description
A1~A8 Switch output A to 1~8
B1~B8 Switch output B to 1~8
C1~C8 Switch output C to 1~8
D1~D8 Switch output D to 1~8
E1~E8 Switch output E to 1~8
F1~F8 Switch output F to 1~8
G1~G8 Switch output G to 1~8
6
6
H1~H8 Switch output H to 1~8
ABCD...1~ABCD...8 Switch output ABCD... to 1~8
P0 POWER OFF
P1 POWER ON
I1~I8 switch all the output to 1~8
7. SPECIFICATIONS
TMDS Clock Frequency 2.25 Gbps
Input Ports 8 x DVI, 1 x IR, 1 x RS-232, 1 x USB B type(for
fi rmware update only), 1 x RJ-45 (LAN)
Output Ports 8 x DVI
ESD Protection Human body model: ±8 kV (air-gap
discharge)
±4 kV (contact
discharge)
Power Supply 24V/6.25A DC (US/EU standards, CE/FCC/
UL certifi ed)
Dimensions (mm) 438(W) x 255(D) x 93(H)
Weight(g) 4392
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption(W)
Altri manuali per CMSI-8D8DS
1
Indice
Altri manuali CYP Commutatore a matrice
CYP
CYP PU-8H8HBTL Manuale utente
CYP
CYP PU-424HBTE Manuale utente
CYP
CYP PU-16H8HBT Manuale utente
CYP
CYP PRO-SDI44 Manuale utente
CYP
CYP OR-42UHD Manuale utente
CYP
CYP PUV-662PL-4K22 Manuale utente
CYP
CYP OR-HD88S Manuale utente
CYP
CYP CMSI-3232 Manuale utente
CYP
CYP PU-8H8HBTPL-4K22 Manuale utente
CYP
CYP CMSDI-164 Manuale utente
CYP
CYP CPLUS-1082CVAL Manuale utente
CYP
CYP CMLUX-44E Manuale utente
CYP
CYP CMSI-8H8CV Manuale utente
CYP
CYP CDPS-44SM Manuale utente
CYP
CYP EL-42M-PIP Manuale utente
CYP
CYP PU-424HBTL-KIT Manuale utente
CYP
CYP PUV-1082PL-4K22 Manuale utente
CYP
CYP OR-44VWC Manuale utente
CYP
CYP PU-8H8HBTE-4K Manuale utente
CYP
CYP SM-2X2-HDMI-LC Manuale utente
