CYP OR-HD88HC Manuale utente

OR-HD88HC

v1.4 HDMI 8 x 8 Matrix Switcher with simultaneous

HDMI & CAT Outputs (inc. IR)

OPERATIONS MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

RDV1 15/02/2012 Preliminary Release

CONTENTS

1. Introduction ...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features ..................................................7

6. Operation Controls and Functions .......8

6.1 Front Panel ................................................... 8

6.2 Rear Panel ..................................................... 9

6.3 Side Panel ...................................................10

6.4 Remote Control ........................................10

6.5 IR Cable Pin Assignments .....................11

6.6 RS-232 Protocols ......................................12

6.7 RS-232 Commands ..................................13

7. Connection Diagram .......................... 14

8. Specications ...................................... 16

9. Acronyms ............................................. 17

1. INTRODUCTION

The OR-HD88HC Matrix Switcher connects eight HDMI sources to 16

displays. This matrix features 8 HDMI outputs and each HDMI output

is mirrored to provide a Twin CAT output which runs simultaneously.

Connect a PU-1106RX Receiver to each of the Twin CAT outputs to extend

the HDMI signal up to 45m for multi-room connectivity.This matrix

switcher can be controlled via the supplied IR Remote Control, RS-232, or

by using the selection buttons on the front of the unit. This device supports

‘Deep Colour’, High Denition Audio, and 3D signal compatibility.

2. APPLICATIONS

HDMI System controls

Video/TV wall display and control

Security surveillance and control

Commercial advertising, displaying and control

Lecture room display and control

Hyper market demonstration and control

3. PACKAGE CONTENTS

8×8 HDMI over Twin CAT6 Matrix

HDMI over Dual CAT6 Receiver (Optional)

1×IR Extender

8×IR Blaster

1×24 V/6.25 A DC Power Adaptor

1×IR Remote Control

Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipment with HDMI connection cables

Output display or audio receiver equipments with HDMI connection

cables

HDMI over dual CAT6 Receiver(s) with industry CAT6 cable

5. FEATURES

HDMI, HDCP 1.1, DVI 1.0 compliant

Resolutions supported: PC - VGA to WUXGA ; HDTV - 480i to 1080p

plus 1080p24fps

High Denition audio supported: Dolby TrueHD, Dolby Digital Plus,

DTS-HD Master Audio + LPCM

The HDMI input is compensated, clock / phase adjusted, and jitter

eliminated so the output is a brand new standard HDMI signal running

up to 15m at 1080p

RS-232, CEC Command functionality, IR Remote Control, and IR

extender supported

Selectable EDID settings - TV (downstream) and STD (xed)

Supports Deep Colour (10 & 12 bit)

Supports 3D signals

Key lock function

Note:

1. This system was tested with CAT-6E/23AWG cables, results may vary with

cables of a dierent specication.

2. Cable distance tested with a Sony PS3 40G, 37" Philips 8-bits LCD TV and

37" Samsung 12-bits LCD TV.

3. Figures provided in this manual are for reference only, actual gures may

vary depending on the source equipment and display being used along

with the type of cables and their specications.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER LOCK

MENU OUTA 1B2C3D4

E5F6G7H8

8X8 HDMI MATRIX CMSI-8H8HC

2 3 4 5 61

LCM Display: Displays the setting information of each input and

output selection.

Power Button LED: Press this button to power the device on/o.

The LED will illuminate green when the power is on, red when it is in

'Standby' mode.

LOCK: Press this button to lock all the buttons on the panel, press

again to unlock.

IR: IR Receiver window (accepts the remote control signal of this

device only).

MENU: Press this button once to select EDID setting from STD (internal)

1 or TV (external) 2 then press it again to conrm the selection. Press

this button everytime to conrm the selection.

1~8/A~H and OUT/IN Buttons: Press the Out or In button to select

the output or input mode then press the required number button to

make the selection accordingly.

For example, if outputs A~D need to be set to input 1 and outputs

E~H need to be set to input 2 then the following sequence of button

presses need to be performed

Press: Out ABCDIn1Menu,

and then press: OutEFGHIn2Menu.

Note: If the menu button is not press the selection will not be changed.

6.2 Rear Panel

LAN

DC 24V

RS232 SERVICE

HDMI VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO

DDC DDC DDC DDC DDC DDC DDC DDC

OUTPUT A

HDMI IN

V+

GND

GND GND

V+

HDMI

OUTPUT B

HDMI

OUTPUT C

HDMI

OUTPUT D

HDMI

OUTPUT E

HDMI

OUTPUT F

HDMI

OUTPUT G

HDMI

OUTPUT H

IR IN

2 4

LAN: Reserved.

RS-232: Connect to a PC or laptop with D-Sub 9-pin female cable for

the transmission of RS-232 commands.

3 IR IN: This slot is to connect with the IR extender included in the package

for IR signal receiving from the remote control of this device and the

source and display equipments.

SERVICE: This slot is to connect with mini USB-B type cable for rmware

update only.

IR OUTPUT A~H: Connect the supplied IR blasters (included in the

package) for IR signal transmission.

DDC/VIDEO OUTPUT A~H: Connect to the Receiver units with CAT6

cables from the Receiver for HDMI Audio/Video and IR/RS232 control.

HDMI OUTPUT A~H: These slots are to connect to the output display for

simutaneouse output image with CAT6 cables.

HDMI INPUT 1~8: Connect to the HDMI input source equipment such

as DVD player or Set-top Box with HDMI cable or DVI to HDMI converter

cable.

9 DC 24V Main Power: This slot is where user connect the 24V DC power

adaptor included in the package and plug the adaptor to an AC wall

outlet for power supply, for powering the main unit.

6.3 Side Panel

Fan Ventilator: These are air ventilation areas, DO NOT block these

areas or cover it with any object. Please allow adequate space around

the unit for air circulation

6.4 Remote Control

1 POWER: Press this button to switch on the device or set it to standby

mode.

2 IN: Input ports selection 1~8.

3 OUT: Output ports selection A~H.

Altri manuali per OR-HD88HC

Indice

Altri manuali CYP Commutatore a matrice

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette

Lindy

Lindy 38042 Manuale utente